Cisco SPA-1X10GE-L-V2 XFP Expansion Module
If you need a large quantity of SPA-1X10GE-L-V2 product - call us at +1 (718) 766 5269 or request a quote at live chat and our sales manager will contact you shortly.
Looking for assistance? Connect with one of our experts
FREE Shipping. We are accepting NET 30 Days Purchase Orders. Get a decision in seconds, without affecting your credit.

SPA-1X10GE-L-V2 Cisco 1-Port 10 Gigabit Ethernet Expansion Refurbished

Availability: In Stock
Part Number#: SPA-1X10GE-L-V2
List Price was: $850.00
Your Price:
You Save: $629.00 (74% off)

3% Discount on Checkout

Short Description:
SPA-1X10GE-L-V2 7600 Series Single-mode 1-Port 10 Gigabit Ethernet Expansion Module | Made by Cisco | Refurbished
Product Condition:
Warranty provided by ALLHDD.COM:
90 Days

Installation and Setup Process

The installation and setup process of the SPA-1X10GE-L-V2 Cisco 1-Port 10 Gigabit Ethernet Expansion Module involves the following steps:

  • Power off the device and unplug it from the power source.
  • Remove the cover of the device by unscrewing the screws on the side of the chassis.
  • Locate the slot on the device where the module will be installed.
  • Gently remove the blank module cover from the slot.
  • Insert the SPA-1X10GE-L-V2 module into the slot, making sure it is firmly seated.
  • Secure the module in place by tightening the screws on the sides of the module.
  • Reattach the cover of the device and screw it back in place.
  • Power on the device and verify that the module is recognized by the system.

Once the module is installed, the setup process involves configuring it using the command line interface (CLI) or the graphical user interface (GUI) of the device. This includes configuring the interfaces, VLANs, and routing protocols as required for the network.

Configuration Options

The SPA-1X10GE-L-V2 Cisco 1-Port 10 Gigabit Ethernet Expansion Module can be configured using various options, including:

  • Port Configuration: The module supports different port configurations, including single-mode and multi-mode fiber, as well as copper cables, depending on the network requirements.
  • VLAN Configuration: The module supports VLAN configuration options that enable network administrators to segment the network and improve security.
  • Quality of Service (QoS) Configuration: The module provides QoS features that allow network administrators to prioritize traffic and allocate bandwidth based on the needs of the network.
  • Link Aggregation Control Protocol (LACP) Configuration: The module supports LACP, which enables the creation of a logical link between the module and the switch, improving network performance and redundancy.
  • Jumbo Frame Configuration: The module supports jumbo frames, which allow for the transmission of larger packets, improving network efficiency.
  • Spanning Tree Protocol (STP) Configuration: The module supports STP, which enables network administrators to prevent network loops and improve network stability.
  • Traffic Monitoring and Analysis Configuration: The module can be configured to support various traffic monitoring and analysis tools, including NetFlow and SNMP, to help diagnose network problems and optimize network performance.

Troubleshooting Common Issues

Some common issues that can arise when using the SPA-1X10GE-L-V2 Cisco 1-Port 10 Gigabit Ethernet Expansion Module include:

  • Hardware failure: If the module fails to power on or is not recognized by the device, it could be due to a hardware failure. Troubleshoot by checking the connections and ensuring the device is properly seated.
  • Compatibility issues: Ensure that the module is compatible with the device it is being installed in. Refer to the device's documentation and specifications to ensure compatibility.
  • Configuration errors: Misconfiguration of the module's settings or the device's configuration could cause issues with performance or connectivity. Double-check the configuration settings and ensure they are correct.
  • Cable issues: If there is no connectivity or if there is intermittent connectivity, it could be due to issues with the cables. Check the cables and ensure they are properly connected and not damaged.
  • Software compatibility issues: Ensure that the device's software is compatible with the module's firmware version. Upgrade the firmware if necessary.
  • Power supply issues: Ensure that the device is receiving sufficient power to operate the module. Check the power supply and ensure it is providing the required power.

General Information about this Cisco SPA-1X10GE-L-V2

Technical Information for Expansion Module

Media & Performance of 1 Port Module

  • Media Type Supported: Optical Fiber
  • Fiber Mode Supported: Single-mode

Features and Functions for Ethernet Module

  • Full-duplex operation
  • 802.1Q VLAN termination
  • 802.1ad QinQ termination (stacked VLAN processing)
  • Jumbo frames support (9188 bytes)
  • Support for command-line interface (CLI)-controlled online insertion and removal (OIR)
  • 802.3x flow control
  • Bridge protocol data unit (BPDU), Cisco Discovery Protocoland VLAN Trunking Protocol (VTP) filtering
  • Layer 2 Protocol (BPDU, Cisco Discovery Protocol, and VTP) Tunneling
  • Layer 2 access list (MAC address-based filtering)
  • Up to 8000 VLANs per SPA and subject to a limit of 4000 VLANs per port for 802.1q
  • Up to 5000 MAC accounting entries per SPA (source MAC accounting on the ingress, and destination MAC accounting on the egress)
  • Up to 2000 MAC address entries for destination MAC address filtering per SPA, and up to 1000 MAC address filtering entries per port
  • Per-port byte and packet counters for policy drops; oversubscription drops; cyclic-redundancy-check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets
  • Per-VLAN byte and packet counters for policy drops; oversubscription drops; and unicast, multicast, and broadcast packets
  • Per-port byte counters for good bytes and dropped bytes

Other software features supported

  • Ethernet over Multiprotocol Label Switching (EoMPLS)
  • QoS
  • Hot Standby Router Protocol (HSRP)
  • Virtual Router Redundancy Protocol (VRRP)

Environmental Specifications

  • Storage temperature: -38 to 150°F (-40 to 70°C)
  • Operating temperature, nominal: 32 to 104°F (0 to 40°C)
  • Operating temperature, short term: 32 to 131°F (0 to 55°C)
  • Storage relative humidity: 5 to 95% relative humidity
  • Operating humidity, nominal: 5 to 85% relative humidity
  • Operating humidity, short term: 5 to 90% relative humidity
  • Operating altitude: -60 to 4000 meters

I/O Expansions of Ethernet Module

  • Number of Total Expansion Slots: 1
  • Expansion Slot Type: XFP

Management & Protocols

  • Management:
  • Host-system CLI
  • Simple Network Management Protocol (SNMP)
  • Inventory- and asset management-related MIBs
  • Fault management MIBs
  • Physical interface management MIBs
  • Remote Monitoring (RMON)-MIB
  • Cisco-class-based-QoS-MIB
  • MPLS-related MIBs
  • Ethernet MIB/RMON


  • Compatibility:
  • Cisco 7600 Series Router
  • Cisco 12000 Series Router
  • Cisco XR 12000 Series Router
  • Cisco CRS-1 Carrier Routing System

Compliance and Agency Approvals


  • UL 60950-1
  • CSA C22 No. 60950-1
  • EN 60950-1
  • IEC 60950-1
  • AS/NZS 60950
  • EN 60825-1
  • EN 60825-2
  • 21 CRF 1040


  • CFR 47, FCC Part 15-Class A
  • ICES 003-Class A
  • CISPR 22 Class A
  • EN 55022 Class A
  • EN 300386 Class A
  • AS/NZS Class A
  • VCCI-Class B
  • EN 50082-1
  • EN 55024
  • IEC/EN61000-4-2 Electrostatic Discharge Immunity (8-kV contact, 15-kV air)
  • IEC/EN61000-4-3 Radiated Immunity (10 V/m)
  • IEC/EN61000-4-4 Electrical Fast Transient Immunity (2-kV power, 1-kV signal)
  • IEC/EN61000-4-5 Surge AC Port (4-kV CM, 2-kV DM)
  • IEC/EN61000-4-5 Surge Signal Port (1-kV indoor, 2-kV outdoor)
  • IEC/EN61000-4-5 Surge DC Port (1 kV)
  • IEC/EN61000-4-6 Immunity to Conducted Disturbances (10 Vrms)
  • IEC/EN61000-4-8 Power Frequency Magnetic Field Immunity (30 A/m)
  • IEC/EN61000-4-11 Voltage Dips, Short Interruptions, and Voltage Variations


  • IEEE 802.3ae (10 Gigabit Ethernet interface SPA)

Industry Standards

  • The Cisco 1-Port 10-GE SPA is designed to meet the following requirements (some qualifications are currently in progress):
  • SR-3580-Network Equipment Building Standards (NEBS): Criteria levels (Level 3 compliant)
  • GR-63-CORE-NEBS: Physical protection
  • GR-1089-CORE-NEBS EMC and safety

Weight & Dimension

  • Height: 0.8 Inch
  • Width: 6.8 Inch
  • Depth: 7.3 Inch
  • Weight (Approximate): 12 Lbs

About Refurbished Products

Refurbished products are typically refurbished by an Original Manufacturer or an affiliate of the manufacturer or 3rd party facility. This product may have minor blemishes due to normal product usage and doesn't necessarily come with documentation and software unless indicated, but has been well tested and generally has never had any defects.

For all your expansion module needs, we've got you covered with high-performance devices that increase functional capability and ease business processes.

You can talk to any of our staff and consult on what would be the best way forward when getting an expansion module to complement and enhance existing infrastructure and meet your immediate and future needs.

We have hardware level 12 with firmware 3.0 or higher modules that allow for the installation of up to 14 expansion modules below the base module for resilient performance. Expansion modules connect to the base module using USB Type-A connectors. That's not all, we have hardware level 11 and lower that supports up to 9 expansion modules.

With an expansion module, you get additional cartridge storage as well as tape drive capacity. We have expansion modules that contain up to two drives and two power supplies. You can choose to have the expansion module with tape drives and power supply installed so that it makes setup easier from your end. Expansion modules will need a power supply only if you install a tape drive in them. A single power supply can actually power two drives. However, you can add a second power supply for redundancy purposes. Without a tape drive, the expansion module is powered via the USB cable connected to the base module.

Expansion modules require 2U rack space and will be shipped with the necessary mounting hardware used to secure them to the rack.

The top features of the expansion modules we've listed include:

  • High-resolution LCD screens of up to 5" with backlight for a vibrant visual experience and ease of use. The expansion modules have programmable line keys ensuring that the interface is intuitive and interactive.
  • Straightforward setup to facilitate easy installation.
  • Availability of a wide range of custom configurations
  • Advanced call handling and contact management capabilities to help increase productivity.
  • XML browser functionality
  • Compatibility across systems which helps to leverage existing IT infrastructure investment. All the expansion modules we've made available will help to enhance your existing desktop solutions.
  • Seamless fusion with planar and fibre technology
  • Compatibility with phone models such as SIP-T27P and SIP-T29G helps to expand functionality.
  • Availability of color icons that enhance the visual experience for users. There are color-coded independent actionable control keys that facilitate fast switching between pages.
  • Ability to link together a maximum of six phone systems and up to two expansion modules from a single host phone.
  • Support for up to 3 modules on a daisy-chain
  • Reduced excess loss and PDL
  • Support for advanced call functions including call forwarding, call transfers, multi-person conferencing, call pickup, LDAP, speed dial, and BFL list.
  • Shipped with a stand that has two adjustable angles

You can find almost every module option in our catalogue, we have modules with different numbers of ports, from 1-port options to 50- and 90-port options, you can also check out our 20 Gigabit, 48 Gigabit, and 100 Gigabit expansion modules. Browse through our categories to find the best option for your needs.

All expansion modules make for ideal solutions for administrative assistants, receptionists, and contact center employees due to the ability to easily manage large call volumes and monitor a large number of contacts.

Here, you can check more available conditions of your desired product SPA-1X10GE-L-V2 at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.


Please choose your location for calculate shipping cost.


ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.

What does ALLHDD.Com warranty cover?

30-days to 3 years warranty:

Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.

What is not covered by our warranty?

The reason why our warranty does not cover any problem caused by the following conditions:

(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;

(b) any misuse outside the instructions in the user manual for any specific product;

(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.

What is the Manufacturer/Brand Warranty?

In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).

For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.

Important notes:

We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.

Individual product warranty mentioned on each item product description page/detail page.

Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.


Shipping Options and Estimated Delivery Time

UPS Shipping Options:

FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days

UPS 3 Day Select®
Estimated delivery time: 3 business days

UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM

UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.

UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM

UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.

UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday

FedEx Shipping Options:

FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.

FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)

FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states

FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)

FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states

FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states

Worldwide Shipping Options:

UPS®/FedEx® International Economy

Estimated delivery time: 4-7 business days

UPS®/FedEx® International Priority

Estimated delivery time: 2-4 business days

UPS®/FedEx® Ground Shipping Canada

Estimated delivery time: 5-8 business days

Important notes:

  • The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
  • We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
  • If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
  • You can estimate the shipping cost from the products detail page, also available on the checkout page
  • The shipping cost depends on box dimensions, weight, and zip/postal code
  • To get a FedEx® delivery service you need to mention it on the checkout page notebox.
  • For urgent shipments, please contact our customer service.
  • Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.