Description
System Requirements
The system requirements for the Dell 08D1V4 6TB 7.2K RPM SAS-12GBITS 512E LFF Hard Drive include:
- SAS controller: A SAS controller is required to connect the hard drive to the computer system. The controller must support the SAS-12GBITS interface.
- Available SAS port: The hard drive must be connected to a SAS port on the controller.
- Power supply: The hard drive requires a power supply to function. It needs to be connected to a power source that can provide the necessary voltage and current.
- Compatible system: The hard drive is compatible with Dell systems that support SAS-12GBITS interface. It is not compatible with systems that use SATA interface.
- Operating System: The hard drive is compatible with most major operating systems such as Windows, Linux, and macOS.
- EFI & UEFI Boot Support: The system should be capable of booting from the SAS-12GBITS hard drive with EFI & UEFI boot support.
It’s important to consult the system documentation or the manufacturer’s website to ensure that the hard drive is compatible with the specific system before purchase.
Installation and Setup
Hardware installation:
- Make sure that the computer is turned off and unplugged from the electrical outlet.
- Open the computer case and locate the drive bay where the hard drive will be installed.
- Carefully insert the hard drive into the drive bay, making sure that it is properly aligned and securely connected to the motherboard.
- Close the computer case.
Software installation:
- Boot the computer and enter the BIOS or UEFI setup utility.
- Locate the section for configuring hard drives and set the new hard drive as the primary boot device.
- Save the changes and exit the setup utility.
- Boot the computer using the operating system installation media (such as a DVD or USB drive) and begin the installation process.
- Follow the on-screen instructions to partition and format the hard drive and complete the installation of the operating system.
Connectivity
The 08D1V4 Dell 6TB 7.2K RPM SAS-12GBITS 512E LFF Hard Drive uses a SAS (Serial Attached SCSI) interface for connectivity. SAS is a high-speed data transfer interface that allows for faster data transfer rates and improved performance compared to traditional SATA interfaces. The 12 Gb/s SAS interface provides faster data transfer rates than earlier versions of SAS interfaces.
The hard drive also has a LFF (Large Form Factor) design, which means it is a 3.5-inch drive that is designed to fit in larger drive bays commonly found in servers and other enterprise-level computer systems.
This hard drive can be connected to a SAS controller or SAS expander to provide the required connectivity. It can be used in a variety of applications, including servers, storage arrays, and external storage enclosures.
It’s important to note that this hard drive is not compatible with SATA interface, and must be installed in a system that has a SAS controller or SAS expander.
Specifications
- MPN : 08D1V4
- Device Type : Hard Drive – Hot Plug
- Capacity : 6TB
- Form Factor : 3.5
- Interface : SAS-12GBITS
- Features : 512e Crypto
- SKU : 08D1V4
Performance
- Spin Speed : 7200 RPM
- Drive Transfer Rate : 1200 MBPS (external)
- Interfaces : 1 X Serial Attached SCSI
- Compatible Bays : 1 X Hot Plug – 3.5inch
Dimension and Weight
- Width : 4 Inch
- Depth : 5.8 Inch
- Height : 1 Inch
- Weight : 1.52 Lbs
Compatibility
- Poweredge R210
- Poweredge R310
- Poweredge R320
- Poweredge R410
- Poweredge R415
- Poweredge R420
- Poweredge R510
- Poweredge R515
- Poweredge R520
- Poweredge R710
- Poweredge R720
- Poweredge R720xd
- Poweredge T310
- Poweredge T320
- Poweredge T410
- Poweredge T420
- Poweredge T610
- Poweredge T620
- Poweredge T710
- Powervault Dl2200
- Powervault Md1200
- Powervault Md3200
- Powervault Md3200i
- Powervault Md3600f
- Powervault Md3600i
- Powervault Nx200
- Powervault Nx300
- Powervault Nx3000
- Powervault Nx3100







