Description
More Information
The 1DA200-150 Dell 1.2TB 10K RPM SAS 6GBPS 64MB Internal Hard Drive is a large capacity hard drive produced by Dell. It has a storage capacity of 1.2 Terabytes and uses the SAS (Serial Attached SCSI) interface for data transfer. SAS is a high-speed, high-performance data transfer interface that is typically used in enterprise-level storage systems and servers. The drive supports a data transfer rate of 6 Gbps, which is the standard SAS data transfer rate. Additionally, it has a rotation speed of 10,000 RPM, which is faster than the standard 7200RPM of most hard drives.
The drive is designed for use in servers and storage systems, it is designed to work seamlessly with these systems and it is fully tested and validated by Dell for optimal performance and reliability. The drive also features 64MB of buffer memory, which improves the drive’s performance and allows it to handle high-performance workloads.
It is important to check the compatibility of the drive with the specific server or storage array model before installing it, as well as checking the maximum capacity limit of the server or storage array. It is also important to check the firmware compatibility and the storage controller compatibility. Additionally, it is important to monitor the drive’s health and implement regular backups to protect your data.
High-performance
The 1DA200-150 Dell 1.2TB 10K RPM SAS 6GBPS 64MB Internal Hard Drive is a high-performance hard drive that is designed to provide fast data access and storage capabilities.
The storage capacity of 1.2TB means that the drive can store a large amount of data.
The rotation speed of 10,000 RPM (revolutions per minute) is faster than traditional hard drives that run at 7200 RPM. The faster rotation speed allows for faster access to data stored on the drive, which improves the overall performance of the drive.
The SAS interface has a data transfer rate of 6 Gbps, which is faster than the older SAS 3 Gbps and SATA 3 Gbps interfaces. This allows for faster data transfer between the drive and the host system, which improves performance.
Additionally, the 64MB cache allows for faster data access and improves the drive’s overall performance by storing frequently accessed data.All these features make the drive suitable for use in servers and high-performance storage systems where fast data access and storage are required.
General Compatibility
The 1DA200-150 Dell 1.2TB 10K RPM SAS 6GBPS 64MB Internal Hard Drive is designed to be compatible with servers and storage arrays that support the SAS interface and have a standard form factor. The drive uses the SAS interface for data transfer, which is commonly used in enterprise-level storage systems and servers, it offers higher performance and reliability than SATA drives. The drive supports a data transfer rate of 6 Gbps, which is the standard SAS data transfer rate.
It is important to check the compatibility of the drive with the specific server or storage array model before installing it, as well as checking the maximum capacity limit of the server or storage array. Additionally, it is important to check the firmware compatibility and the storage controller compatibility. Dell server models can be checked for compatibility by searching the Dell website using the service tag of the server or searching for the part number of the drive. Additionally, it is also important to check the operating system compatibility, as some operating systems may require special drivers or configuration for the drive to work properly.
General Information
- Manufacturer : Dell
- Manufacturer Part Number : 1DA200-150
- Product Type : Hard Drive
Technical Information
- Storage Capacity : 1.2TB
- Rotational Speed : 10000 RPM
- Interface : Serial Attached SCSI 2
- Form Factor : 2.5inch
- Enclosure : Internal
- Buffer : 64MB
- Drive Transfer Rate: 600 MBPS
