Description
High-speed Connectivity 24 Ethernet Ports and 2 10 Gigabit SFP+
The 210-ABPY Dell N3024 Managed L3 Switch provides high-speed connectivity through its 24 Ethernet ports and 2 10 Gigabit SFP+ ports.
The 24 Ethernet ports provide a high number of connectivity options for network devices, allowing for greater flexibility and scalability in growing and changing network environments. These ports support speeds of up to 1 Gbps, providing fast data transfer and network performance.
The 2 10 Gigabit SFP+ ports offer even higher-speed connectivity options for demanding network environments. These ports support speeds of up to 10 Gbps, allowing for fast data transfer between network devices and reduced latency. The SFP+ ports also provide greater distance capabilities, allowing for longer cable runs than traditional Ethernet ports.
Key Features
The key features of the 210-ABPY Dell N3024 Managed L3 Switch are:
- Managed L3 Switch: The N3024 is a managed Layer 3 switch, providing advanced networking capabilities such as VLANs, QoS, and IP routing.
- 24 Ethernet Ports: The switch has 24 Ethernet ports, providing a high number of connectivity options for network devices.
- 2 10 Gigabit SFP+ Ports: The N3024 features 2 10 Gigabit SFP+ ports, offering high-speed connectivity options for demanding network environments.
- 2 Combo 1000Base-T Ports: The switch also has 2 combo 1000Base-T ports, providing versatile connectivity options for network devices that support both SFP and Ethernet interfaces.
- Advanced Network Management: The N3024 is equipped with advanced network management features, allowing administrators to monitor, configure, and control the switch from a centralized location.
- Reliable Performance: The switch is designed for reliable performance, with features such as error-free transmission, low latency, and support for Jumbo Frames.
Empowering Network Administrators
Empowering network administrators refers to providing them with the tools and technologies they need to effectively manage and maintain their networks. The 210-ABPY Dell N3024 Managed L3 Switch is designed to do just that.
The switch is equipped with advanced network management features that allow administrators to monitor, configure, and control the switch from a centralized location. This centralized management can reduce manual errors, improve network performance, and increase overall efficiency.
The switch also supports software-defined networking (SDN) and network automation tools, enabling administrators to manage the switch and the network more efficiently. With these tools, administrators can automate tasks such as configuration, deployment, and maintenance, freeing up time to focus on more strategic initiatives.
In addition, the N3024 is designed to be reliable and secure, providing administrators with peace of mind that their network is protected and running smoothly. The switch features error-free transmission, low latency, and support for Jumbo Frames, among other features.
Specifications
- Manufacturer: Dell
- MPN: 210-ABPY
- Type: Networking
- Switch Type: Switch 24 Ports
- SKU: 210-ABPY
Key Features
- Enclosure Type : Rack-mountable – 1u
- Subtype : Gigabit Ethernet
- Ports : 24 X 10/100/1000 + 2 X 10 Gigabit Sfp+ + 2 X Combo 1000base-t
- Performance : Switching Fabric Bandwidth : 212 GBPS Forwarding Performance : 158 MBPS Stacking Bandwidth : 84 GBPS
- Capacity : Mac Addresses : 16384 Ipv4 Routes (static) : 1024 Ipv6 Routes (static) : 1024 Ipv4 Routes (dynamic) : 8160 Ipv6 Routes (dynamic) : 4096 Maximum Member Ports Per Lag : 8 Maximum Dynamic Ports Per Switch Stack : 144 Lag Groups : 128 Ospf Routes : 8160 Rip Routes : 512 Ecmp Next Hops Per Route : 4 Ecmp Groups : 64 Vlan Routing Interfaces : 128 Vlans Supported : 4094 Multicast Entries (ipv4) : 512 Multicast Entries (ipv6) : 256 Arp Entries : 6144 Ndp Entries : 400 Acl : 100 Maximum Rules Per Acl : 1023 Max Acl Rules System-wide : 4096 Maximum Acl Rules Per Interface (ipv4) Egress Rules : 1024 Maximum Acl Rules Per Interface (ipv4) Ingress Rules : 3072 Maximum Acl Rules Per Interface (ipv6) Egress Rules : 512 Maximum Acl Rules Per Interface (ipv6) Ingress Rules : 1021 Maximum Vlan Interfaces With Acls Applied : 24
- Mac Address Table Size : 16k Entries
- Routing Protocol : Ospf, Rip-1, Rip-2, Igmpv2, Igmp, Vrrp, Pim-sm, Pim-dm, Igmpv3, Ospfv3, Mldv2, Mld
- Remote Management Protocol : Snmp 2, Snmp, Rmon, Http, Ssh
- Encryption Algorithm : Md5, Aes, Ssl, Tls
- Authentication Method : Secure Shell (ssh), Radius, Tacacs+
- Features : Flow Control, Layer 3 Switching, Layer 2 Switching, Mdi/mdi-x Switch, Auto-negotiation, Port Mirroring, Stackable, Weighted Round Robin (wrr) Queuing, Broadcast Storm Control, Rapid Spanning Tree Protocol (rstp) Support, Multiple Spanning Tree Protocol (mstp) Support, Quality Of Service (qos), Port Forwarding, Lldp Support, Link Aggregation Control Protocol (lacp), Per-vlan Rapid Spanning Tree (pvrst), Energy Efficient Ethernet, Dynamic Vlan Support (gvrp), Dual Firmware Images, Network Access Control (nac), Tagged Vlan, Generic Vlan Registration Protocol (gvrp), Redundant Fans, Protocol-based Vlans Support
- Compliant Standards : IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1d, IEEE 802.1q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (lacp), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1v, IEEE 802.1ag, IEEE 802.1ab (lldp), IEEE 802.3az
- Ram : 1 Gb
- Flash Memory : 256 Mb
Expansion / Connectivity
- Interfaces : 24 X Gigabit Lan – Rj-45 2 X 10gbit Lan – Sfp+ 2 X Gigabit Lan – Rj-45 1 X Serial (rs-232) – Rj-45 – Management 1 X Usb – Type A 2 X Network Stack Device
- Expansion Slots : 1 (total) / 1 (free) X Expansion Slot
Power
- Power Device : Internal Power Supply – Hot-plug
- Installed Qty : 1 (installed) / 2 (max)
- Power Redundancy : Optional
- Power Provided : 200 Watt
- Power Consumption Operational : 52.8 Watt
