Description
Performance
The performance of a 400-BBSY Dell 7.68TB SAS 12Gbps 512e Hot Plug Solid State Drive (SSD) will depend on several factors, including the type of workload and the controller it is connected to. Generally, SAS SSDs offer high performance, with fast read and write speeds, and low latency. A SAS 12Gbps interface allows for a maximum data transfer rate of 12 Gbps (1.5 GB/s) which is faster compared to SAS 6Gbps interface . And with a 512e format, the drive has a capacity of 7.68TB and is optimized for use in enterprise storage systems.
Reliability
The reliability of a 400-BBSY Dell 7.68TB SAS 12Gbps 512e Hot Plug Solid State Drive will depend on several factors, including the quality of the components used in the drive, the manufacturer’s design and testing processes, and the way the drive is used and cared for.
In general, solid state drives are considered to be more reliable than traditional hard disk drives (HDDs) because they have no moving parts and are less susceptible to damage from physical shocks and vibrations. Additionally, Dell is considered a well-known vendor in the industry with a good reputation for producing reliable hardware.
This drive is a SAS drive, which is typically used in enterprise-grade systems, where high reliability is critical. It’s also a hot-plug drive, which means it can be replaced without shutting down the system, reducing the risk of downtime.
It is important to note that over time, all SSDs will inevitably suffer from wear and will reach a point where the endurance limit of the drive is reached. Meaning that over time, drive will lose its reliability, which could occur after a certain number of write cycles which are performed on the drive. The manufacturer may have their own guaranteed endurance limit and write cycle.
To ensure the best reliability, it’s important to follow best practices when using and maintaining the drive, such as using it in a clean, cool, and dry environment, and properly configuring it in a RAID array or other fault-tolerance setup.
Compatibility of Internal SSD
The compatibility of a 400-BBSY Dell 7.68TB SAS 12Gbps Hot Plug Solid State Drive will depend on the system in which it is being used and the hardware and software configurations of that system.
This drive is designed for use in systems that support the SAS interface and 12Gbps data transfer rates, and therefore would be compatible with servers and storage arrays that have SAS connectors and are capable of supporting 12Gbps data transfer rates. It is also a hot-plug drive, which means it can be replaced without shutting down the system, so it should be compatible with systems that support hot-plugging drive.
The 512e format is a standard format for enterprise drives which allows for better compatibility with systems that support 4K byte logical block format.
It’s also important to check for any system specific requirements or restrictions, such as maximum drive capacity or RAID controller compatibility. It’s best to check the user manual, technical guide or the vendor’s website for the specific model of your server or storage array to verify compatibility.
General Information about this Dell 400-BBSY
- Manufacturer: Dell
- Model Number or SKU# 400-BBSY
- Product Type: Solid State Drive (SSD)
- Interface: SAS 12GBPS
Technical Information for 7.68TB Solid State Drive
- Storage Capacity: 7.68TB
- Nand Flash Memory Type: V-nand Tlc
- Form Factor: 2.5inch (in 3.5inch Hybrid Kit)
- Data Transfer Rate: 12GPBS
- Best Use: Read-Intensive
- InterfacesTypes: Serial Attached SCSI (SAS)
- Enclosure: Internal
Features
- Read-intensive Endurance,
- Advanced Format 512e
Expansion & Connectivity
- Interfaces: 1 X Sas 12 Gb/s
- Compatible Bays: 1 X Hot-plug – 2.5inch (in 3.5inch Hybrid Kit)
Dimension and Weight
- Height: 0.63 inch
- Width: 3.10 inch
- Depth: 5.45 inch
- Weight: 1.50 lbs
Compatibility
- PowerEdge R230
- PowerEdge R330
- PowerEdge R430
- PowerEdge R530
- PowerEdge R630
- PowerEdge R730
- PowerEdge R730xd
- PowerEdge R930
- PowerEdge T330
- PowerEdge T430
- PowerEdge T530
- PowerEdge T630
- PowerVault MD1200
- PowerVault MD1400
- PowerVault MD3400
- PowerEdge T440
- PowerEdge T640
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system
