Description
Product Overview
The N1124P-ONF Dell Emc Networking N1124p-on is a switch that is designed to manage a network of devices. It has 24 ports and is rack-mountable. The switch is managed, which means that it can be configured to control the traffic flow and to optimize the network performance. In this article, we will discuss the features of the N1124P-ONF Dell Emc Networking N1124p-on switch in detail.
Port Density and Type
The N1124P-ONF Dell Emc Networking N1124p-on switch has a total of 24 ports. The ports are all Gigabit Ethernet ports, which means that they can support speeds of up to 1000Mbps. There are 24 RJ-45 ports on the front panel of the switch. These ports can be used to connect devices such as computers, servers, printers, and other network devices.
Power over Ethernet
The N1124P-ONF Dell Emc Networking N1124p-on switch supports Power over Ethernet (PoE). This means that it can provide power to connected devices such as IP phones, wireless access points, and security cameras. The switch can provide up to 30W of power per port, which is enough to power most PoE devices.
Managed Switch
The N1124P-ONF Dell Emc Networking N1124p-on switch is a managed switch. This means that it can be configured and managed using software. The switch comes with a web-based management interface that allows you to configure and monitor the switch. The management interface is easy to use and provides access to a range of features.
VLAN Support
The N1124P-ONF Dell Emc Networking N1124p-on switch supports VLANs (Virtual Local Area Networks). VLANs are used to separate network traffic into different virtual networks. This can be useful in situations where you want to segregate different types of network traffic. For example, you might want to separate voice and data traffic on your network to ensure that voice traffic has priority.
Quality of Service
The N1124P-ONF Dell Emc Networking N1124p-on switch supports Quality of Service (QoS). QoS is used to prioritize network traffic based on its importance. For example, you might want to give voice traffic a higher priority than data traffic to ensure that voice calls are not affected by network congestion.
Link Aggregation
The N1124P-ONF Dell Emc Networking N1124p-on switch supports link aggregation. Link aggregation is used to combine multiple physical links into a single logical link. This can be useful in situations where you need more bandwidth than a single link can provide. For example, you might want to combine four 1Gbps links into a single 4Gbps link.
Security Features
The N1124P-ONF Dell Emc Networking N1124p-on switch has a range of security features. These features are designed to protect your network from unauthorized access and attacks. The switch supports 802.1X authentication, which requires users to authenticate before they can access the network. The switch also supports ACLs (Access Control Lists), which can be used to restrict access to specific network resources.
Rack-mountable Design
The N1124P-ONF Dell Emc Networking N1124p-on switch is designed to be rack-mountable. This means that it can be installed in a standard 19-inch rack. The switch has a compact design, which means that it takes up less space in your server room or data center. The switch also has a built-in power supply, which means that you do not need to purchase a separate power supply.
General Information about the Dell N1124P-ONF
- Manufacturer: Dell
- Part Number or SKU# N1124P-ONF
- Device Type : Switch – 24 Ports – Managed – Stackable
Technical Information
- Enclosure Type : Rack-mountable 1U
- Subtype : Gigabit Ethernet
- Ports : 24 X 10/100/1000 (12 Poe+) + 4 X 10 Gigabit Sfp+
- Power Over Ethernet (poe) : Poe+
- Poe Budget : 190 W
Performance
- Switching Fabric Bandwidth: 128 Gbps ¦ Forwarding Performance: 96 Mpps
- Capacity : Mac Addresses: 16000 ¦ Aggregated Links (Dynamic): 144 ¦ Lag Groups: 64 ¦ Queues Per Port: 8 ¦ Vlans Supported: 512 ¦ Arp Entries: 2048 ¦ Ndp Entries: 400 ¦ Max Acl Rules System-Wide: 4000 ¦ Acl: 100 ¦ Maximum Acl Rules Per Interface (Ipv4) Ingress Rules: 1023 ¦ Maximum Acl Rules Per Interface (Ipv4) Egress Rules: 1023 ¦ Maximum Acl Rules Per Interface (Ipv6) Ingress Rules: 1021 ¦ Maximum Acl Rules Per Interface (Ipv6) Egress Rules: 253
- Mac Address Table Size : 16000 Entries
Management and Protocol
- Routing Protocol : Igmpv2, Igmp, Igmpv3
- Remote Management Protocol : Snmp 2, Snmp, Rmon, Telnet, Http, Tftp, Ssh-2
- Encryption Algorithm : Aes, Ssl, Tls 1.0
- Authentication Method : Radius, Tacacs+, Ldap
- Features : Layer 2 Switching, Mdi/mdi-x Switch, Auto-negotiation, Port Mirroring, Ip Address Filtering, Access Control List (acl) Support, Quality Of Service (qos), Front To Back Airflow, Lldp Support, Remote Switch Port Analyzer (rspan), Management Information Base (mib), Dual Firmware Images, Redundant Fans, Mac And Ip-based Acls Support, Time-controlled Acls Support
- Compliant Standards : Ieee 802.2, Ieee 802.3, Ieee 802.3u, Ieee 802.3z, Ieee 802.1d, Ieee 802.1q, Ieee 802.3ab, Ieee 802.1p, Ieee 802.3af, Ieee 802.3x, Ieee 802.3ad (lacp), Ieee 802.1w, Ieee 802.1x, Ieee 802.3ae, Ieee 802.3ac, Ieee 802.1s, Ieee 802.1v, Ansi/tia-1057, Ieee 802.1ab (lldp), Ieee 802.3at, Ieee 802.3az, Ieee 802.3ax
- Ram : 1 Gb
- Flash Memory : 1 GB
Expansion / Connectivity
- Interfaces : 12 X Gigabit Lan Rj-45 ¦ 12 X Gigabit Lan Rj-45 Poe+ ¦ 4 X 10gbit Lan Sfp+ ¦ 1 X Usb Type A ¦ 1 X Micro-usb
Power
- Power Device : Internal Power Supply
- Installed Qty : 1
- Power Provided : 250 Watt
- Power Consumption Operational : 249.6 Watt
