Description
Key Features and Benefits of the LPE16000-E Emulex 16GB Single Port
The Emulex LPE16000-E is a high-performance 16GB Single Port PCI-Express 2.0 Fibre Channel Host Bus Adapter (HBA) that provides reliable connectivity and efficient data transfer for enterprise storage networks. Here are some key features and benefits of this product:
- High Performance: The Emulex LPE16000-E provides a maximum data transfer rate of 16 Gb/s, which allows for fast and efficient data transfer between servers and storage devices.
- Enhanced Security: The HBA supports advanced security features such as Secure Boot and HBA Authentication, which help to protect data from unauthorized access and ensure system integrity.
- Scalability: The LPE16000-E is designed for scalability, making it easy to add more HBAs to a system as storage needs grow. The HBA also supports virtualization, allowing multiple virtual machines to access the same physical HBA.
- Easy Management: The HBA is easy to install and manage using Emulex’s OneCommand Manager software. This software provides a centralized interface for configuring, monitoring, and managing multiple HBAs from a single console.
- Energy Efficiency: The LPE16000-E is designed for energy efficiency, with features such as Dynamic Power Management and GreenState power management. These features help to reduce power consumption and lower operating costs.
- Compatibility: The HBA is compatible with a wide range of operating systems and storage devices, making it easy to integrate into existing storage networks.
Installation and Configuration of the LPE16000-E Emulex 16GB
To install and configure the LPE16000-E Emulex 16GB Single Port PCI-Express 2.0 Fibre Channel Host Bus Adapter, follow the steps below:
- Shut down your computer or server.
- Insert the LPE16000-E adapter into an available PCI-Express 2.0 slot on your motherboard.
- Power on your computer or server.
- Install the Emulex drivers for your operating system. You can download the drivers from the Emulex website.
- After the drivers have been installed, configure the adapter settings using the Emulex OneCommand Manager software.
- Connect the Fibre Channel cables to the adapter.
- Configure the Fibre Channel switches and storage arrays as needed.
- Test the adapter by connecting to your Fibre Channel storage arrays and verifying that the storage is accessible.
- If necessary, configure any additional settings, such as multipathing or zoning.
- Once the adapter is installed and configured, you can start using it for your Fibre Channel storage needs.
Compatibility and Interoperability of the LPE16000-E Emulex
The LPE16000-E Emulex 16GB Single Port PCI-Express 2.0 Fibre Channel Host Bus Adapter is compatible with a wide range of operating systems, including Windows, Linux, VMware, and Solaris. It is also compatible with various storage arrays from leading vendors, such as Dell EMC, HP, NetApp, and IBM.
In terms of interoperability, the LPE16000-E is designed to work seamlessly with other Emulex Fibre Channel products, including switches, directors, and fabric adapters. It also supports industry-standard protocols and features, such as NPIV, FCP, FC-AL, FC-FLA, and more, ensuring compatibility and interoperability with other Fibre Channel devices and networks.
General Information
- Brand: Emulex
- MPN : LPE16000-E
- Type: Controller
- Sub-Type: Fibre Channel
- Form Factor : Plug-In Card
- Interface (Bus) Type : Pci Express 2.0
- Pci Specification Revision : Pci 2.0
Technical Information
- Ports : 16GB Fibre Channel
- Low Profile : Low Profile
- Pci Specification Revision : Pci 2.0
- Type : Host Bus Adapter
- Max Transfer Distance (Optical) : 410 Ft
- Connectivity Technology : Wired
- Data Link Protocol : 16gb Fibre Channel, 4gb Fibre Channel, 8gb Fibre Channel, Fibre Channel Over Ethernet (Fcoe)
- Data Transfer Rate : 14.025 Gbps
-324x324.jpg)
