Description
Interface and Transfer Rate of the Hard Disk Drive
The HP 622519-001 hard disk drive has a SATA interface with a transfer rate of 3 Gb/s (gigabits per second). This interface is widely used in enterprise-level storage systems and is capable of delivering high data transfer speeds. The 3.5-inch form factor of the drive allows it to be installed in standard drive bays in most server systems.
The hard disk drive has a rotational speed of 7.2K RPM, which provides good performance for most applications. It also has a data transfer rate of up to 126 MB/s (megabytes per second), which is the maximum sustained transfer rate of the drive. The access time of the drive is 8.5 ms (milliseconds), which is the time it takes for the drive to locate and read or write data.
Power Consumption and Cooling Requirements
The HP 622519-001 hard disk drive has a maximum power consumption of 7.0 watts during operation and 4.0 watts when idle. The power consumption is relatively low, which helps to reduce the overall power consumption of the server system and can lead to lower energy costs.
In terms of cooling requirements, the hard disk drive requires adequate airflow to maintain proper operating temperatures. The server system should be designed to provide sufficient cooling to ensure that the hard disk drive operates within the recommended temperature range. The recommended operating temperature range for the drive is 41°F to 131°F (5°C to 55°C), and the recommended storage temperature range is -40°F to 158°F (-40°C to 70°C).
It is important to ensure that the server system has adequate cooling to maintain the recommended operating temperatures of the hard disk drive, as excessive heat can shorten the lifespan of the drive and increase the risk of data loss. Proper cooling can be achieved through the use of fans, vents, and other cooling mechanisms, as well as proper cable management to ensure that airflow is not obstructed.
Operating and Storage Temperature/Humidity Ranges
The HP 622519-001 hard disk drive has specific recommended temperature and humidity ranges for both operating and storage conditions.
The recommended operating temperature range for the drive is 41°F to 131°F (5°C to 55°C), and the recommended operating humidity range is 5% to 90% (non-condensing). It is important to ensure that the server system is designed to maintain temperatures and humidity within these ranges to ensure proper performance and reliability of the hard disk drive.
The recommended storage temperature range for the drive is -40°F to 158°F (-40°C to 70°C), and the recommended storage humidity range is 5% to 95% (non-condensing). It is important to ensure that the hard disk drive is stored within these recommended ranges to ensure that it remains in good condition and does not suffer from any damage or degradation over time.
Exposure to temperatures or humidity outside of the recommended ranges can cause damage to the drive and can result in data loss or reduced reliability. It is important to ensure that the server system and storage environment are designed and maintained to keep the hard disk drive within these recommended ranges.
General Information
- Manufacturer : HP
- MPN : 622519-001
- Type : Hard Disk Drive (HDD)
- Sub-Type : SATA
- SKU : 622519-001
Dimension and Weight
- Width: 4 Inch
- Depth: 5.8 Inch
- Height: 1 Inch
- Weight: 1.52 LBS
Technical Information
- Storage Capacity : 1TB
- Rotational Speed : 7200 RPM
- Average Seek Time : 8.5 MS
- Interface : SERIAL ATA-300
- Features : Native Command Queuing (NCQ)
- Drive Dimensions : 3.5 Inches
- Compliant Standards : S.M.A.R.T.
- Track-To-Track Seek Time : 1 MS
- Min Operating Temperature : 41 °F
- Max Operating Temperature : 131 °F
-324x324.jpg)
