Description
Installation and setup Instructions
- Start by installing the HP FlexFabric 2Ports SFP+ 10Gbps Gigabit Ethernet PCI Express 2.0 x8 Network Adapter into an available PCI Express slot on the server. Ensure that the card is securely seated and the locking mechanism is engaged.
- Connect the SFP+ transceiver modules to the SFP+ ports on the network adapter. Make sure that the transceiver modules are securely inserted and locked into place.
- Connect the appropriate cables to the SFP+ transceiver modules. These cables should be compatible with the SFP+ transceiver modules and the devices on the other end.
- Power on the server and boot it up into the operating system.
- Install the appropriate drivers for the HP FlexFabric 2Ports SFP+ 10Gbps Gigabit Ethernet PCI Express 2.0 x8 Network Adapter. These drivers can be found on the HP website or on the installation CD that came with the network adapter.
- Once the drivers are installed, open the network settings on the server and configure the network adapter to the appropriate settings. This may include setting the IP address, subnet mask, and gateway.
- Test the network connection by pinging a device on the network or running a network speed test.
- If the network adapter is not functioning properly or if there are any errors, refer to the troubleshooting guide provided with the network adapter or contact HP support for assistance.
Note: These instructions are general and may vary depending on the specific model and operating system of the server. It is important to refer to the user manual and documentation provided with the network adapter for specific installation and setup instructions.
Network connectivity Options
The 649870-001 HP FlexFabric 2Ports SFP+ 10Gbps Gigabit Ethernet PCI Express 2.0 x8 Network Adapter is a network connectivity option for servers and other computer systems. It is designed to provide high-speed data transfer and connectivity to other devices on a network.
- SFP+ ports: The adapter has two SFP+ (small form-factor pluggable) ports, which allow for the connection of fiber-optic or copper cables for 10 Gbps data transfer.
- 10 Gbps speed: The adapter supports a data transfer rate of 10 Gbps, which is significantly faster than traditional gigabit Ethernet.
- PCI Express 2.0 x8 interface: The adapter connects to a computer system through a PCI Express 2.0 x8 slot, which provides a high-speed connection for data transfer.
- Gigabit Ethernet: The adapter supports the standard Gigabit Ethernet protocol, which allows for compatibility with a wide range of devices and networks.
- FlexFabric technology: The adapter is equipped with HP’s FlexFabric technology, which provides advanced network management and security features.
- HP compatibility: The adapter is designed for use with HP servers and other computer systems, ensuring compatibility and ease of installation.
Benefits and Odvantages
- High-speed connectivity: The HP FlexFabric 2Ports SFP+ 10Gbps Gigabit Ethernet PCI Express 2.0 x8 Network Adapter allows for fast data transfer speeds of up to 10Gbps, making it ideal for high-bandwidth applications such as video streaming and large file transfers.
- Dual port design: This network adapter features two SFP+ ports, providing the ability to connect multiple devices simultaneously. This allows for increased network flexibility and scalability.
- PCI Express 2.0 interface: The PCI Express 2.0 x8 interface provides a fast and efficient connection between the adapter and the host computer, ensuring low latency and high throughput.
- Gigabit Ethernet compatibility: The adapter is compatible with Gigabit Ethernet networks, allowing it to be used in a wide range of environments and applications.
- Easy installation and management: The HP FlexFabric 2Ports SFP+ 10Gbps Gigabit Ethernet PCI Express 2.0 x8 Network Adapter is easy to install and manage, making it a convenient option for both enterprise and home users.
- Enhanced security: The adapter supports advanced security features such as NIC Teaming, VLAN tagging, and Quality of Service (QoS), providing enhanced protection for your network and data.
- Compatibility: This adapter is compatible with a wide range of operating systems and servers, making it easy to integrate into any existing network infrastructure.
General Information about the HPE
- Manufacturer: HP
- Model Number or SKU#649870-001
- Type: Networking
- Adapter Type: Network Adapter 2 Port
Performance
- Data Link Protocol Gigabit Ethernet
- Data Transfer Rate 10 GBPS
- Interface / Connectivity PCI-Express
- Number of Port(s) 2
- Ports Type SFP+
