Description
Features and Benefits
The HP Ethernet 1GB 2Port 361FLB Adapter is a network interface card designed for high-speed data transfers between servers and network switches. The adapter provides a range of features and benefits that make it an ideal choice for data center applications. Some of the features and benefits of the HP Ethernet 1GB 2Port 361FLB Adapter are:
- High-Speed Data Transfer: The HP Ethernet 1GB 2Port 361FLB Adapter is designed to provide high-speed data transfers of up to 1 Gbps. This allows for faster data transfer between the server and the network switch, resulting in improved application performance.
- Dual-Port Design: The adapter comes with two ports, allowing for increased bandwidth and redundancy. This means that if one port fails, the other port can still maintain network connectivity.
- Low Latency: The HP Ethernet 1GB 2Port 361FLB Adapter features low latency, which reduces the delay between data transfer requests and the actual transfer of data. This results in improved application performance and faster response times.
- Reduced CPU Utilization: The adapter features hardware acceleration that offloads network processing from the server CPU. This reduces the server CPU utilization, freeing up resources for other tasks.
- Energy Efficiency: The HP Ethernet 1GB 2Port 361FLB Adapter is designed to be energy-efficient, consuming less power than other network interface cards. This reduces power consumption and lowers operating costs.
- Scalability: The adapter is designed to be scalable, allowing for easy integration into existing data center infrastructures. This means that it can be easily deployed in environments with high bandwidth requirements.
- Virtualization Support: The HP Ethernet 1GB 2Port 361FLB Adapter supports virtualization, allowing for the creation of virtual network interfaces. This enables multiple virtual machines to share the same physical network interface, improving resource utilization and reducing costs.
Installation and Configuration
The installation and configuration of the HP Ethernet 1GB 2Port 361FLB Adapter is a straightforward process. Here are the steps to follow:
- Shut down the server and unplug it from the power source.
- Open the server case and locate an available PCIe slot. The HP Ethernet 1GB 2Port 361FLB Adapter is a half-height, half-length card, so make sure you have a compatible slot available.
- Carefully insert the adapter into the PCIe slot and secure it with the screw provided.
- Close the server case and plug the server back into the power source.
- Power on the server and wait for it to boot up.
- Once the server has booted up, log in to the operating system.
- Install the appropriate driver for the adapter. The driver can be downloaded from the HP website.
- After the driver has been installed, open the network configuration utility for the operating system.
- Configure the adapter by setting the IP address, subnet mask, gateway, and DNS server information as required for your network.
- Verify that the adapter is working correctly by pinging the IP address of another device on the network.
- If the ping is successful, the adapter is ready for use.
In some cases, you may need to configure the adapter using the HP network configuration utility. This utility allows you to configure advanced settings such as VLAN tagging, teaming, and bandwidth control.
Compatibility and Interoperability
The HP Ethernet 1GB 2Port 361FLB Adapter is compatible with a wide range of servers and network switches. It is designed to work with HP ProLiant Gen8 and Gen9 servers, and it supports a range of operating systems, including Windows, Linux, and VMware.
The adapter is also interoperable with other network devices, such as routers, switches, and firewalls. It supports a range of networking protocols, including TCP/IP, IPv4, IPv6, and VLAN tagging. This makes it an ideal choice for data center environments that require high-speed data transfer and seamless integration with existing network infrastructures.
To ensure compatibility and interoperability, it is recommended to check the product documentation or the HP website for a list of supported servers, operating systems, and network devices. It is also important to ensure that the drivers and firmware for the adapter and other network devices are up to date to prevent any compatibility issues.
General Information about the HPE 652498-001
- Model Number or SKU# 652498-001
- Device Type : Network Adapter – 2 Ports
- Interface (Bus) Type : Pci Express 2.1 X4
- Pci Specification Revision : Pcie 2.1
Networking
- Connectivity Technology : Wired
- Data Link Protocol : Gigabit Lan
- Data Transfer Rate : 1 GBPS
- Features : Wake On Lan (Wol), Jumbo Frames Support, Pxe Support, Large Send Offload (Lso)
Compliant Standards
- IEEE 802.3, IEEE 802.1q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (Lacp), IEEE 802.1as
Expansion / Connectivity
- Compatible Slots : 1 X Flexiblelom
