Description
Key Features and Benefits
The C8R25A HPE 10GB Short Wave iSCSI SFP+ 4-Pack Transceiver Module is a type of networking module that is designed for use with HPE (Hewlett Packard Enterprise) equipment. It is a set of four small form-factor pluggable (SFP+) transceivers that provide high-speed connectivity over short distances.
The key features and benefits of this module are:
- 10GB Ethernet Connectivity: The C8R25A module provides 10 Gigabit Ethernet connectivity, allowing for high-speed data transfer over the network.
- Short Wave iSCSI Support: The module supports Short Wave iSCSI (Internet Small Computer System Interface), which is a protocol used for storage networking. This makes it an ideal choice for storage area network (SAN) applications.
- SFP+ Form Factor: The small form-factor pluggable (SFP+) form factor allows for easy installation and removal of the module. This makes it easy to upgrade or replace the module without having to replace the entire networking equipment.
- Multi-mode Fiber Support: The module supports multi-mode fiber, which is a type of optical fiber that can transmit multiple signals at the same time. This allows for greater bandwidth and faster data transfer rates over short distances.
- Hot-swappable: The C8R25A module is hot-swappable, meaning it can be installed or removed while the networking equipment is still running. This minimizes downtime and disruption to the network.
Installation and Configuration
The C8R25A HPE 10GB Short Wave iSCSI SFP+ 4-Pack Transceiver Module is a network module designed for use with Hewlett Packard Enterprise (HPE) switches and network adapters. This module provides high-speed connectivity for iSCSI storage networks, with a maximum data rate of 10 Gigabits per second (Gbps).
Installation:
To install the C8R25A module, follow these steps:
- Power off the switch or network adapter where you plan to install the module.
- Locate the SFP+ slots on the switch or adapter. These are typically located on the front or rear of the device and are labeled with a small “SFP+” icon.
- Remove the protective cap from the SFP+ slot where you plan to install the module.
- Insert the C8R25A module into the SFP+ slot, making sure to align the module’s connector with the slot.
- Push the module firmly into the slot until it clicks into place.
- Replace the protective cap on the SFP+ slot.
- Power on the switch or adapter.
Configuration:
Once the module is installed, you may need to configure your switch or network adapter to use it. Follow these steps to configure the module:
- Log in to the switch or network adapter using the appropriate management tool (such as HPE Intelligent Management Center).
- Navigate to the SFP+ port configuration page.
- Locate the SFP+ port where the C8R25A module is installed.
- Configure the port settings as necessary for your network environment. This may include setting the speed and duplex mode, configuring VLANs, and enabling flow control.
- Save your configuration changes.
- Verify that the module is functioning correctly by checking the switch or adapter’s status page.
Maintenance and Troubleshooting
C8R25A is a product code for a Hewlett Packard Enterprise (HPE) 10GB Short Wave iSCSI SFP+ 4-Pack Transceiver Module. This is a type of optical transceiver that can be used in networking equipment, such as switches, routers, and storage devices, to enable high-speed data transmission over fiber optic cables.
Maintenance of these transceiver modules typically involves keeping them clean and ensuring they are securely plugged into the device they are installed in. If the device is used in a dusty or dirty environment, it may be necessary to clean the transceiver with a lint-free cloth or compressed air to prevent dust or debris from interfering with the signal.
Troubleshooting a faulty transceiver module can involve several steps. First, it is important to verify that the device is compatible with the transceiver module and that it is inserted correctly. If the device and transceiver are compatible and inserted correctly, it may be necessary to check the fiber optic cables for damage or breakage. Additionally, it may be helpful to check the device logs for any error messages or indications of a problem with the transceiver module.
If the problem persists, it may be necessary to replace the transceiver module. HPE provides support and replacement services for their products, so contacting their technical support team or a qualified service provider can be helpful in resolving any issues with these transceiver modules.
General Information
- Manufacturer: HP
- MPN: C8R25A
- Spare Part Number: 721748-001
- Model Number: FTLX8571D3BCL-1H
- Assembly Number: 721000-001
- SKU: C8R25A
- Transceiver Type: SFP+ Transceiver Module
- Form Factor: Plug-in Module
- Connectivity Technology: Wired
- Cabling Type: SCSI
- Data Link Protocol: 10GbE
- Type: SFP+
Interfaces / Ports
- Interfaces / Ports Details: 1 x 10GBase-SW Network
Media & Performance
- Media Type Supported: Optical Fiber
- Ethernet Technology: 10 Gigabit Ethernet
- Network Technology: 10GBase-SW
- Maximum Data Transfer Rate: 10Gbps
Compatibility Information
- HP Modular Smart Array: 2040 10Gb iSCSI Dual Controller SFF Bundle, 2040 Dual Controller SFF Bundle, 2040 FC Dual Controller SFF Bundle, 2040 LFF Chassis, 2040 LFF DC-power Chassis, 2040 LFF Disk Enclosure, 2040 SAN Dual Controller LFF Storage, 2040 SAN Dual Controller SFF Bundle, 2040 SAN Dual Controller SFF Storage, 2040 SAS Dual Controller SFF Bundle.
