JL258A#ABA HPE Aruba 8 Ports Layer 3 Rack Mount Switch New

The JL258A#ABA HPE Aruba Switch provides a range of networking capabilities that make it well-suited for use in enterprise and data center environments. Some of the key networking capabilities of the switch include:

• High-speed network connectivity: The switch provides 8 Gigabit Ethernet ports and 2 SFP+ ports, which allows for high-speed network connectivity and the ability to connect multiple devices to the switch.
• Layer 3 switching: The switch is a Layer 3 switch, which means it can route between VLANs and also supports routing protocols such as OSPF, BGP and more. This feature provides more advanced network management and scalability for a larger network.
• Quality of Service (QoS): The switch supports Quality of Service (QoS) features, which allow you to prioritize certain types of network traffic, such as voice and video, for better performance.
• VLAN tagging: The switch supports VLAN tagging, which allows you to create virtual LANs and segment network traffic for improved security and performance.
• Link Aggregation Control Protocol (LACP): The switch supports Link Aggregation Control Protocol (LACP), which allows you to bundle multiple physical ports together to form a single logical link, providing redundancy and increasing available bandwidth.
• Advanced security features: The switch supports advanced security features such as secure boot, which can help to

The JL258A#ABA HPE Aruba Switch provides a range of security features that make it well-suited for use in enterprise and data center environments. Some of the key security features of the switch include:

• Advanced Access Control Lists (ACLs): The switch supports advanced ACLs, which allow you to control network access based on a variety of criteria, such as IP address, port, and protocol.
• Secure Boot: The switch supports Secure Boot, which helps to protect against unauthorized firmware or software changes.
• Access Control: The switch supports access control features, such as 802.1X authentication and RADIUS, which can help to prevent unauthorized access to the network.
• TACACS+ and RADIUS authentication: The switch supports TACACS+ and RADIUS authentication, which allows you to authenticate users and devices before they can access the network.
• DHCP Snooping: The switch supports DHCP Snooping, which helps to prevent malicious DHCP servers from distributing rogue IP addresses and DHCP options to clients.
• IP Source Guard: The switch supports IP Source Guard, which helps to prevent IP address spoofing by binding IP addresses to MAC addresses.
• SFP+ ports Security: The switch supports SFP+ port security, which helps to prevent unauthorized access to the network by limiting the number of MAC addresses that can be learned on a port

The JL258A#ABA HPE Aruba Switch is designed with energy efficiency in mind, and provides a number of features that help to reduce power consumption and lower overall energy costs. Some of the key power consumption and energy efficiency features of the switch include:

• Energy Efficient Ethernet (EEE): The switch supports Energy Efficient Ethernet (EEE), which reduces power consumption during periods of low network activity.
• Power-saving modes: The switch supports various power-saving modes, such as link down power savings and cable-length power savings, which can help to reduce power consumption when the switch is not in use.
• PoE+: The switch supports PoE+ (Power over Ethernet Plus), which allows you to power devices such as IP phones, wireless access points, and cameras using the switch's Ethernet cables, eliminating the need for separate power supplies.
• Power-saving features on SFP+ ports: The switch supports power-saving features on SFP+ ports, which can help to reduce power consumption when the ports are not in use.
• Power supply redundancy: The switch supports power supply redundancy, which allows you to install a second power supply to ensure that the switch continues to function even if one power supply fails.
• Energy detection and management: The switch supports energy detection and management, which allows you to monitor power consumption and identify opportunities to reduce energy usage.

• Manufacturer: HPE
• Part Number or SKU# JL258A#ABA
• Product Type : Networking
• Product Name : 8 Ports Switch
• Enclosure Type : Rack-Mountable 1u

• Ports : 8 X 10/100/1000 (Poe+) + 2 X 1 Gigabit / 10 Gigabit Sfp+ (Uplink)
• Power Over Ethernet (Poe) : Poe+
• Performance : Throughput: 41.7 MPPS ¦ Switching Capacity: 56 GBPS ¦ Latency (1 GBPS): 3.8 µs ¦ Latency (10 Gbps): 1.6 µs
• Capacity : Jumbo Frame Size: 9220 ¦ Ipv4 Routing Table Entries: 10000 ¦ Ipv6 Routing Table Entries: 5000
• Mac Address Table Size : 32k Entries
• Routing Protocol : Ospf, Rip, Rip-1, Rip-2, Bgp, Igmpv2, Igmp, Ospfv2, Static Ip Routing, Igmpv3, Ospfv3, Static Ipv4 Routing, Static Ipv6 Routing, Ripng, Mld, Cidr
• Remote Management Protocol : Snmp 1, Snmp 2, Rmon 1, Snmp, Telnet, Snmp 3, Snmp 2c, Ssh, Ssh-2, Cli, Xrmon
• Encryption Algorithm : MD5, SSL
• Authentication Method : Radius, Pap, Chap, Tacacs, Tacacs+
• Features : Flow Control, Full Duplex Capability, Dhcp Support, Bootp Support, Arp Support, Vlan Support, Igmp Snooping, Syslog Support, Diffserv Support, Ipv6 Support, Sntp Support, Sflow, Spanning Tree Protocol (Stp) Support, Multiple Spanning Tree Protocol (Mstp) Support, Access Control List (Acl) Support, Quality Of Service (Qos), Jumbo Frames Support, Dhcp Server, Stp Root Guard, Uni-Directional Link Detection (Udld), Fanless, Lldp Support, Link Aggregation Control Protocol (Lacp), Management Information Base (Mib), Mac Address Lockout, Dynamic Arp Protection, Dhcp Protection, Dynamic Vlan Support (Gvrp), Multiple Vlan Registration Protocol (Mvrp), Neighbor Discovery Protocol (Ndp), Class Of Service (Cos), Type Of Service (Tos), Openflow Support, Cpu Protection, Internet Control Message Protocol (Icmp), Icmp Router Discovery Protocol (Irdp), Virtual Extensible Lan (Vxlan), Management Information Base (Mib) Ii
• Compliant Standards : IEEE 802.1d, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (Lacp), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.1ab (Lldp), IEEE 802.3at, IEEE 802.3az, IEEE 802.1ax

• 1 X Arm Cortex-A9 : 1.016 GHz
• RAM : 1 GB - DDR3 Sdram
• Flash Memory : 4 GB

• Interfaces : 8 X 1000Base-T - Rj-45 - Poe+ ¦ 2 X Gigabit / 10gbit Lan - Sfp+ ¦ 1 X Serial (Console)
• Expansion Slots : 1 (Total) / 1 (Free) X Expansion Slot
• Installed Modules Qty (Max) : 0 (Installed) / 2 (Max)