Description
Reliability and Compatibility
The HPE JL429-61001 Aruba 3810M 48-Ports POE+ Layer 3 SFP+ Rack-mountable Managed Switch is a highly reliable and compatible network switch designed for modern data centers and enterprise networks.
Reliability:
- The HPE Aruba 3810M is equipped with redundant power supplies and fans to ensure high availability and minimize downtime in the event of a failure.
- It also supports multiple link aggregation protocols such as Link Aggregation Control Protocol (LACP) and Link Aggregation (LAG) to ensure that traffic is automatically rerouted in case of a link failure.
- The switch also supports Quality of Service (QoS) to prioritize important network traffic and ensure that critical applications receive the bandwidth they need.
Compatibility:
- The HPE Aruba 3810M is compatible with HPE ArubaOS-Switch operating system, which is a feature-rich operating system that offers advanced network management, security, and mobility features.
- It also supports open standards such as Open Shortest Path First (OSPF), Routing Information Protocol (RIP), and Border Gateway Protocol (BGP) for seamless integration into existing network environments.
- The switch also supports 10G SFP+ transceivers for high-speed connectivity, making it compatible with a wide range of SFP+ devices in the market.
In conclusion, the HPE JL429-61001 Aruba 3810M is a reliable and compatible network switch that offers advanced network management and security features to meet the demands of modern data centers and enterprise networks.
Advanced Network Management
The HPE JL429-61001 Aruba 3810M is a 48-port POE+ Layer 3 SFP+ managed switch designed for advanced network management. It is a rack-mountable switch that provides a scalable, secure, and high-performance solution for enterprise networks.
This switch supports Power over Ethernet (PoE+) technology, which allows it to provide power to connected devices such as wireless access points, cameras, and other PoE-enabled devices. The 48 ports can support a maximum of 740W of power, ensuring that all connected devices receive the necessary power to operate efficiently.
The switch supports SFP+ (Small Form-Factor Pluggable Plus) modules, which provide high-speed connectivity options for 10Gbps data transfer rates. The switch supports Layer 3 routing, which enables it to route traffic between different subnets and VLANs (Virtual Local Area Networks) in the network.
The switch is equipped with advanced network management features, which provide granular control over network traffic, security, and performance. The switch supports network virtualization technologies such as VLANs, Quality of Service (QoS), and Virtual Router Redundancy Protocol (VRRP), allowing it to support multiple virtual networks on a single physical device.
Installation and Configuration
The HPE JL429-61001 Aruba 3810M 48-Ports POE+ Layer 3 SFP+ Rack-mountable Managed Switch is a high-performance switch designed for use in large networks. The installation and configuration of this switch are relatively simple and straightforward. Here are the steps to install and configure the switch:
- Unpack the switch and place it in the rack.
- Connect the power cables to the switch and plug them into a power source.
- Connect the Ethernet cables to the switch ports and the devices you want to connect to the switch.
- Connect a console cable to the switch’s console port and a computer.
- Open a terminal program on your computer, such as PuTTY, and configure it to use a serial connection with a baud rate of 9600.
- Power on the switch and watch the boot process in the terminal window.
- When the switch is ready, log in as the administrator and enter the switch’s IP address in a web browser.
- Go to the switch’s web interface and configure the switch’s basic settings, such as the IP address, subnet mask, and default gateway.
- Configure the switch’s advanced features, such as VLANs, Spanning Tree Protocol, and Quality of Service.
- Save the configuration changes and reboot the switch.
- Verify the switch’s configuration by pinging the switch’s IP address from a computer and checking the switch’s status and performance through the web interface.
General Information about the HPE JL429-61001
- Manufacturer: HPE
- Part Number or SKU# JL429-61001
- Interface: Switch 48 Ports
Technical Information
- Enclosure Type : Rack-Mountable 1u
- Subtype: Gigabit Ethernet
- Ports : 48 X 10/100/1000 (Poe+)
- Power Over Ethernet (Poe) : (Poe+)
Performance
- Latency (1000base-T): 2.8 µs ¦ Latency (10 Gbps): 1.8 µs ¦ Latency (40 Gbps): 1.5 µs ¦ Throughput (64-Byte Packet Size): Up To 190.5 Mpps ¦ Routing/Switching Capacity: 320 Gbps ¦ Switching Fabric Bandwidth: 338 Gbps
- Capacity : Ipv4 Routing Table Entries: 10000 ¦ Ipv6 Routing Table Entries: 5000
- Mac Address Table Size : 64k Entries
- Jumbo Frame Support : Yes
Management & Protocol
- Routing Protocol : Ospf, Rip, Rip-1, Rip-2, Bgp, Vrrp, Ospfv2, Ospfv3, Static Ipv4 Routing, Static Ipv6 Routing, Ripng, Mld, Bidirectional Forwarding Detection (Bfd)
- Remote Management Protocol : Snmp 1, Rmon 1, Rmon 2, Rmon 3, Rmon 9, Rmon, Telnet, Snmp 3, Snmp 2c, Http, Ssh, Ssh-2, Cli, Xrmon
- Encryption Algorithm : Ssl
- Authentication Method : Radius, Tacacs+, Secure Shell V.2 (Ssh2)
Features
- Arp Support, Spanning Tree Protocol (Stp) Support, Per-Vlan Spanning Tree (Pvst), Access Control List (Acl) Support, Quality Of Service (Qos), Device Link Detection Protocol (Dldp) Support, Uni-Directional Link Detection (Udld), Management Information Base (Mib), Dynamic Vlan Support (Gvrp), Multiple Vlan Registration Protocol (Mvrp), Class Of Service (Cos), Sflow V5, Type Of Service (Tos), Openflow Support, Internet Control Message Protocol (Icmp)
Compliant Standards
- Ieee 802.3, Ieee 802.3u, Ieee 802.3ab, Ieee 802.1p, Ieee 802.3af, Ieee 802.3ad (Lacp), Ieee 802.1x, Ieee 802.1s, Ieee 802.1v, Ieee 802.11n, Ieee 802.1ab (Lldp), Ieee 802.3at
Memory/Processor
- Processor : 2
- Ram : 6 GB DDR3 SD RAM
- Flash Memory : 1 GB
Expansion / Connectivity
- Interfaces : 48 X 1000base-T – Rj-45 – Poe+ ¦ 1 X Serial (Console) – Rj-45 – Management ¦ 1 X Management – Rj-45 ¦ 1 X – Rj-45 ¦ 1 X Micro-Usb – Type B
- Expansion Slots : 1 (Total) / 1 (Free) X Expansion Slot ¦ 1 (Total) / 1 (Free) X Stacking Module Slot
Power
- Power Device : Internal Power Supply – Hot-Plug
- Installed Qty : 1 (Installed) / 2 (Max)
- Power Redundancy : Yes
- Power Redundancy Scheme : 1+1 (With Optional Power Supply)
- Power Provided : 1050 Watt
- Voltage Required : Dc 54 V
- Energy Star Qualified : Yes
