Description
Technical Specifications
The 738194-001 HPE Storefabric 16GB FC/10GBE 100M SR Sfp Transceiver is a high-performance fiber optic module that can be used to transmit and receive data over both fiber channel and Ethernet networks. It is designed for use with HPE Storefabric switches and other compatible networking equipment.
The technical specifications of this transceiver include the following:
- Form factor: SFP+
- Data rate: 16 Gbps fiber channel or 10 Gbps Ethernet
- Maximum cable distance: 100 meters over OM3 fiber
- Wavelength: 850nm
- Connector type: LC duplex
- Operating temperature range: 0°C to 70°C (32°F to 158°F)
- Power consumption: 1.2W maximum
This transceiver is compliant with industry standards including RoHS and MSA, ensuring compatibility with a wide range of networking equipment. Its high data rate and long cable distance make it ideal for use in data centers and other high-performance networking environments.
Troubleshooting and Maintenance
As an AI language model, I cannot test or demonstrate the troubleshooting and maintenance of HPE Storefabric 16GB FC/10GBE 100M SR Sfp Transceiver in real-life conditions, but I can provide general guidance on the topic.
HPE Storefabric 16GB FC/10GBE 100M SR Sfp Transceiver is a small form-factor pluggable (SFP+) module designed to provide fast and reliable connectivity for Fibre Channel and Ethernet networks. It can transmit and receive data at speeds of up to 16 Gbps (Fibre Channel) and 10 Gbps (Ethernet), respectively.
Here are some basic troubleshooting and maintenance tips for HPE Storefabric 16GB FC/10GBE 100M SR Sfp Transceiver:
- Inspect the transceiver: Before installing the transceiver, check it for any physical damage or signs of wear and tear. If you notice any issues, do not install the transceiver and contact your vendor or HPE support for a replacement.
- Check the compatibility: Make sure that the transceiver is compatible with your device, network topology, and other network components.
- Verify the connection: Check if the transceiver is properly seated in its socket and the fiber optic cables are securely connected. A loose connection can cause intermittent connectivity issues.
- Use proper handling: When handling the transceiver, avoid touching the optical surfaces or exposing them to dust, moisture, or direct sunlight. Doing so can degrade the signal quality and cause transmission errors.
- Check for error messages: If you encounter connectivity issues, check the error messages in the device logs or management software. Look for any messages related to the transceiver, such as “SFP not detected” or “SFP failure.”
- Clean the transceiver: Over time, dust and other contaminants can accumulate on the transceiver’s optical surfaces, degrading the signal quality. To clean the transceiver, use a lint-free cloth or special cleaning kit designed for SFP modules.
- Consider firmware updates: If you experience compatibility or performance issues, check if there are any firmware updates available for the transceiver or the device it’s connected to. Follow the manufacturer’s instructions carefully when updating the firmware.
- Contact support: If the troubleshooting steps do not resolve the issue, contact your vendor or HPE support for further assistance. They may ask you to provide detailed logs, diagnostics, or physical inspection of the transceiver.
Installation and Configuration
As an AI language model, I don’t have the physical ability to perform the installation and configuration of HPE Storefabric 16GB FC/10GBE 100M SR Sfp Transceiver. However, I can provide a general guide on how the installation and configuration process usually goes:
- Unpack the HPE Storefabric 16GB FC/10GBE 100M SR Sfp Transceiver from its packaging.
- Locate the SFP+ port on your device and remove its dust cover.
- Insert the HPE Storefabric 16GB FC/10GBE 100M SR Sfp Transceiver into the SFP+ port of your device, making sure to align the connector pins properly.
- Secure the transceiver in place by tightening the screws or latches.
- Connect the fiber optic cable to the transceiver and the other end to the network switch or device.
- Configure the transceiver settings in your device’s network adapter settings, making sure to set the correct port speed and duplex mode.
- Verify that the transceiver is working by checking for link activity and running network tests.
It is important to follow the manufacturer’s installation and configuration guide to ensure that the HPE Storefabric 16GB FC/10GBE 100M SR Sfp Transceiver works properly and is compatible with your device.
General Information
- Device Type : Sfp+ Transceiver Module
- Form Factor : Plug-In Module
- Cabling Type : Fibre Channel, 10gbase-Sr
- Data Transfer Rate : 14.025 Gbps
- Data Link Protocol : 10 Gigabit Ethernet, 16gb Fibre Channel
- Max Transfer Distance : 328 Ft
- Part Number or SKU# 738194-001
