Shop All: HPE

For bulk orders contact sales via email sales@allhdd.com, via chat, or call our toll-free number 1-800-675-5044.

764283-B21 HPE Infiniband FDR/Ethernet 10GB/40GB 2 Port 544+M PCIe 3.0 Network Adapter. New Bulk Pack.

$40.00

1 in stock

SKU: 764283-B21-2 Category: 2 Port Brand: HPE

Description

Introduction to HPE Infiniband FDR/Ethernet Network Adapter

The 764283-B21 is a network adapter card manufactured by Hewlett Packard Enterprise (HPE). It is designed to provide high-speed connectivity between servers, storage systems, and other network devices.

The network adapter supports two ports, each capable of delivering either 10 Gigabit Ethernet (10GbE) or 40 Gigabit Ethernet (40GbE) speeds. In addition, the card also supports Infiniband FDR (Fourteen Data Rate) connectivity, which is a high-speed interconnect technology designed for high-performance computing (HPC) applications.

The 764283-B21 network adapter card uses the PCIe 3.0 interface, which provides a high-bandwidth, low-latency connection to the server’s motherboard. The card is compatible with a range of HPE servers and storage systems, including ProLiant DL, ML, and BL series servers, and StoreFabric switches.

Features and Specifications

The 764283-B21 is a network adapter card designed by Hewlett Packard Enterprise (HPE). It is a dual-port adapter that provides high-speed connectivity to networks, with support for both Infiniband FDR and Ethernet protocols.

Here are some of the key features and specifications of the 764283-B21 network adapter:

High-speed connectivity: The 764283-B21 supports both Infiniband FDR and Ethernet protocols, offering high-speed connectivity to networks. It provides data transfer rates of up to 56 Gbps for Infiniband and up to 40 Gbps for Ethernet.
Dual-port design: This adapter has two ports, which can be used to connect to different networks or provide redundancy for failover protection.
PCIe 3.0 interface: The adapter uses a PCIe 3.0 interface, which provides high bandwidth and low latency.
Mellanox ConnectX-3 Pro Controller: The adapter uses a Mellanox ConnectX-3 Pro Controller, which provides advanced features such as RDMA and support for multiple protocols.
Low power consumption: The 764283-B21 is designed to consume low power, making it a suitable option for energy-efficient data center environments.
Supported operating systems: The adapter supports a range of operating systems, including Windows, Linux, and VMware.
Dimensions and weight: The adapter measures 6.6 x 2.7 x 0.7 inches and weighs 3.2 ounces.

Installation and Configuration

The 764283-B21 HPE Infiniband FDR/Ethernet 10GB/40GB 2 Port 544+M PCIe 3.0 Network Adapter is a high-speed networking card that can be installed in a server or workstation to provide fast connectivity to other devices on a network. Here are the steps to install and configure the adapter:

Before installing the adapter, make sure the server or workstation is turned off and unplugged from the power source.
Locate an available PCIe 3.0 slot on the motherboard of the server or workstation.
Remove the metal bracket from the back of the adapter by unscrewing the screws holding it in place.
Carefully insert the adapter into the PCIe 3.0 slot, making sure it is securely seated.
Replace the metal bracket on the back of the adapter and screw it back into place.
Connect the network cables to the two ports on the adapter.
Turn on the server or workstation and install the drivers for the adapter. You can find the drivers on the HPE website or on the installation disc that came with the adapter.
Once the drivers are installed, configure the adapter’s settings. This can be done through the operating system’s network configuration tool or through the adapter’s own configuration utility.
Set the appropriate IP address, subnet mask, and gateway for the adapter, and configure any other network settings as necessary.
Test the adapter’s connectivity by pinging other devices on the network. If everything is working properly, you should be able to see fast and reliable network connectivity with the 764283-B21 HPE Infiniband FDR/Ethernet 10GB/40GB 2 Port 544+M PCIe 3.0 Network Adapter.

General Information