Description
Installation and Configuration Options
The HPE 10GB/40GB 2-Port 544+FLR-QSFP+ Adapter (part number 780157-001) is a high-performance network interface card designed for use in HPE ProLiant servers. This adapter supports both 10Gb and 40Gb Ethernet speeds, and includes two ports for connecting to a network.
Installation Process: The installation process for the HPE 10GB/40GB 2-Port 544+FLR-QSFP+ Adapter is relatively straightforward. Follow the steps below to install the adapter:
- Shut down the server and disconnect all cables.
- Remove the server’s cover and locate an available PCIe expansion slot.
- Remove the expansion slot cover.
- Align the adapter with the slot and gently push it into place.
- Secure the adapter in the slot with the appropriate screw.
- Connect the network cables to the adapter.
- Reattach the server’s cover and reconnect all cables.
- Power on the server and install the appropriate driver software.
Configuration Options: Once the adapter is installed, you may need to configure it to suit your specific needs. The HPE 10GB/40GB 2-Port 544+FLR-QSFP+ Adapter supports a variety of configuration options, including:
- Network speed: You can configure the adapter to use either 10Gb or 40Gb Ethernet speeds, depending on your network requirements.
- Jumbo frames: If your network supports jumbo frames, you can enable this feature on the adapter to improve network performance.
- Flow control: The adapter supports both receive and transmit flow control, which can help prevent dropped packets and improve network performance.
- VLAN tagging: You can configure the adapter to support VLAN tagging, which allows you to segregate network traffic and improve security.
- Teaming: The adapter supports link aggregation (also known as “teaming”), which allows you to combine multiple network connections for increased bandwidth and redundancy.
To configure these options, you will need to use the appropriate software tools provided by HPE. Consult the adapter’s documentation or HPE’s website for more information on how to configure the adapter.
Management and Monitoring Capabilities
The 780157-001 HPE 10GB/40GB 2-Port 544+A8l Adapter is a high-performance network adapter designed for use in Hewlett Packard Enterprise (HPE) servers. This adapter provides two ports that support both 10 Gigabit Ethernet (10GbE) and 40 Gigabit Ethernet (40GbE) networking, allowing for high-speed data transfers between servers and network devices.
One of the key features of the 780157-001 adapter is its management and monitoring capabilities. These capabilities allow network administrators to monitor the performance of the adapter and troubleshoot any issues that may arise.
The 780157-001 adapter includes support for HPE’s Virtual Connect Flex-10 technology, which allows network administrators to create virtual NICs (vNICs) on the adapter. This enables administrators to allocate bandwidth to specific applications and services, ensuring that critical workloads have the necessary network resources to perform at their best.
Additionally, the 780157-001 adapter includes support for HPE’s Integrated Lights-Out (iLO) technology, which allows for remote management and monitoring of the server and its components, including the network adapter. With iLO, administrators can remotely monitor the health and status of the adapter, view performance metrics, and even update firmware or configuration settings without needing to physically access the server.
Performance and Speed
The HPE 10GB/40GB 2-Port 544+FLR-QSFP+ Adapter with part number 780157-001 is a network interface card designed for high-performance computing and data center applications. It provides two ports with support for both 10 Gigabit Ethernet (10GbE) and 40 Gigabit Ethernet (40GbE) speeds, allowing for high-speed connectivity to other devices in the network.
The adapter utilizes advanced network technologies such as RDMA (Remote Direct Memory Access) and TSO (TCP Segmentation Offload) to improve performance and reduce CPU overhead. It also supports advanced virtualization features such as SR-IOV (Single Root I/O Virtualization) and VMDq (Virtual Machine Device Queues), which enable efficient allocation of network resources to virtual machines.
The 544+FLR-QSFP+ Adapter is built on an advanced architecture that delivers high throughput and low latency, making it ideal for high-performance applications such as database servers, high-frequency trading, and scientific computing. It supports multiple queue pairs per port, which enables efficient multi-core processing of network traffic.
Detail Description
- Manufacturer: HPE
- MPN: 780157-001
- Type : Networking
- Adapter Type : 2 Port
- SKU: 780157-001
