Description
Installation and Configuration Process
The HPE Ethernet 10GB 2-Port 562FLR-SFP+ adapter is a high-performance network interface card designed for HPE servers. It provides two 10 Gigabit Ethernet ports with SFP+ connectivity, allowing for high-speed data transfers and low latency networking.
The installation and configuration process for the HPE Ethernet 10GB 2-Port 562FLR-SFP+ adapter involves several steps, including hardware installation, driver installation, and network configuration. Here are the general steps to follow:
- Hardware installation: First, ensure that the server is powered off and unplugged. Open the server case and locate an available PCIe slot. Carefully insert the adapter into the slot and secure it with the retention bracket. Close the server case and plug in the power.
- Driver installation: Once the hardware is installed, you need to install the driver software. Download the latest driver from the HPE website and save it to a USB drive or network share. Boot up the server and insert the USB drive or navigate to the network share. Run the driver installation program and follow the prompts to complete the installation.
- Network configuration: After the driver is installed, you need to configure the network settings. Navigate to the Network Connections control panel and locate the HPE 562FLR-SFP+ adapter. Right-click on the adapter and select Properties. In the Properties dialog box, configure the IP address, subnet mask, gateway, and DNS settings as needed for your network. Save the settings and exit the dialog box.
- Test the adapter: Finally, test the adapter to ensure it is working properly. You can do this by pinging the server from another computer on the network, or by using a network benchmarking tool to measure the speed and latency of data transfers.
Features and Benefits
The 789006-B21 is an HPE Ethernet 10GB 2-port 562FLR-SFP+ adapter, which is a network interface card designed to provide high-speed network connectivity to servers and workstations. Here are the features and benefits of this adapter:
Features:
- Dual-port 10Gb Ethernet connectivity: The adapter has two SFP+ ports that can support data transfer rates of up to 10 Gbps per port.
- SFP+ transceiver support: The adapter is compatible with a wide range of SFP+ transceivers, allowing you to use the transceivers that are best suited for your network infrastructure.
- PCI Express 3.0 interface: The adapter uses the latest PCI Express 3.0 interface to provide high-speed connectivity to your server or workstation.
- Low-profile design: The adapter has a low-profile design that makes it suitable for use in space-constrained environments.
- Energy-efficient: The adapter is designed to be energy-efficient, which helps reduce power consumption and lowers operating costs.
Benefits:
- High-speed connectivity: With dual-port 10Gb Ethernet connectivity, the adapter provides high-speed data transfer rates, which can help improve the performance of your network applications.
- Flexible network infrastructure: The adapter’s compatibility with a wide range of SFP+ transceivers allows you to choose the transceivers that are best suited for your network infrastructure.
- Improved server or workstation performance: The high-speed connectivity provided by the adapter can help improve the performance of your server or workstation, which can result in increased productivity and efficiency.
- Reduced power consumption: The adapter’s energy-efficient design helps reduce power consumption, which can lower operating costs and improve the sustainability of your network infrastructure.
- Space-saving design: The adapter’s low-profile design makes it suitable for use in space-constrained environments, which can help you maximize the use of your available space.
Management and Monitoring Capabilities
The HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter is a network interface card (NIC) designed by Hewlett Packard Enterprise (HPE) for servers and other computing devices. This adapter provides high-speed connectivity to the network using SFP+ (Small Form-factor Pluggable Plus) optical modules or Direct Attach Copper (DAC) cables.
In terms of management and monitoring capabilities, the 789006-B21 adapter offers a variety of features that allow users to manage and monitor their network connections. Some of these features include:
- Support for HPE Onboard Administrator (OA) and HPE Insight Control – The adapter is compatible with HPE’s OA and Insight Control software, which provides a centralized management platform for HPE servers and other devices. This allows for easier configuration and monitoring of the adapter, as well as other components in the network.
- Remote management capabilities – The adapter includes support for remote management protocols such as SNMP (Simple Network Management Protocol) and RMON (Remote Monitoring), allowing users to monitor the adapter and the network from a remote location.
- Advanced traffic management features – The adapter includes advanced traffic management features such as traffic shaping, VLAN tagging, and priority queuing. These features allow users to prioritize network traffic, ensuring that critical applications and services receive the necessary bandwidth.
- Integrated diagnostics – The adapter includes built-in diagnostic tools that allow users to monitor the health of the adapter and the network. These tools can help identify and troubleshoot problems, reducing downtime and improving network performance.
General Information
- Manufacturer: HPE
- Manufacturer Part Number: 789006-B21
- Type: Networking
- Sub-Type: 10 Gigabit
- Device Type : Network Adapter
- Form Factor : Plug-In Card
- Interface (Bus) Type : Pci Express 3.0 X8
Networking
- Ports : 10 Gigabit Sfp+ X 2
- Connectivity Technology : Wired
- Data Link Protocol : 10 Gige
- Data Transfer Rate : 10 Gbps
- Capacity : Jumbo Frame Size: 9.5 Kb
- Status Indicators : Link Activity, Status
- Features : Wake On Lan (Wol), Pxe Support
- Compliant Standards : IEEE 802.3, IEEE 802.1q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (Lacp), IEEE 802.3ae, IEEE 802.1ab (Lldp), IEEE 802.1qau
Expansion / Connectivity
- Interfaces : 2 X 10gb Ethernet – Sfp+
