Description
Installation and Configuration of the Adapter
Installing and configuring the HPE Ethernet 10/25GB 2-Port 640FLR-SFP28 Adapter with part number 817748-B21 can be done in a few simple steps:
- Verify server compatibility: Before installing the adapter, ensure that the server is compatible with the adapter. You can check the compatibility list provided by HPE to confirm compatibility.
- Physically install the adapter: Open the server chassis and insert the adapter into an available PCIe slot. Secure the adapter in place using the appropriate screws or clips.
- Connect network cables: Connect the appropriate network cables to the SFP+ ports on the adapter.
- Power on the server: Power on the server and ensure that the adapter is detected by the operating system.
- Install the adapter drivers: Install the appropriate drivers for the adapter on the server. You can download the latest drivers from HPE’s website.
- Configure the adapter: Once the drivers are installed, you can configure the adapter settings using the operating system’s network configuration tools or HPE’s management tools.
The configuration options available for the adapter may vary depending on the operating system and management tools used. Some of the configuration options that may be available include link aggregation, VLAN tagging, and QoS settings.
Installing and configuring the HPE Ethernet 10/25GB 2-Port 640FLR-SFP28 Adapter is a straightforward process that can be completed in a few simple steps. However, it is important to follow the manufacturer’s instructions and best practices to ensure proper installation and optimal performance.
Security Features of the Adapter
The HPE Ethernet 10/25GB 2-Port 640FLR-SFP28 Adapter with part number 817748-B21 includes several security features to help protect against unauthorized access and data breaches.
- Network Access Control: The adapter supports Network Access Control (NAC) standards, such as IEEE 802.1x and TACACS+, which enable administrators to control access to the network and ensure that only authorized devices are allowed to connect.
- Secure Boot: The adapter includes a Secure Boot feature that verifies the integrity of the adapter firmware during boot-up, helping to prevent malware attacks that could compromise the adapter.
- IPsec Offloading: The adapter includes IPsec Offloading, which offloads IPsec processing from the host CPU to the adapter, reducing CPU utilization and improving security.
- MACsec Offloading: The adapter supports MACsec Offloading, which provides secure data transmission by encrypting network traffic at the MAC layer, helping to prevent data tampering and eavesdropping.
- Trusted Platform Module (TPM): The adapter includes a TPM, which provides secure storage and management of encryption keys and other sensitive data, helping to prevent unauthorized access to the adapter and the network.
- Firewall Offloading: The adapter supports Firewall Offloading, which offloads firewall processing from the host CPU to the adapter, reducing CPU utilization and improving security.
The security features of the HPE Ethernet 10/25GB 2-Port 640FLR-SFP28 Adapter with part number 817748-B21 provide a comprehensive set of tools to help protect against unauthorized access, data breaches, and other security threats. These features can help organizations ensure the integrity and confidentiality of their network data and resources.
Compatibility with HPE Servers and Systems
The HPE Ethernet 10/25GB 2-Port 640FLR-SFP28 Adapter with part number 817748-B21 is designed to be compatible with a wide range of HPE servers and systems. This compatibility is achieved through the use of industry-standard PCIe interface, which is supported by most modern servers.
Here are some of the HPE servers and systems that are known to be compatible with the 817748-B21 adapter:
- HPE ProLiant DL and ML Servers: The 817748-B21 adapter is compatible with a wide range of HPE ProLiant DL and ML servers, including DL360, DL380, ML350, and many others.
- HPE BladeSystem: The adapter is also compatible with HPE BladeSystem c-Class enclosures, including BL460c, BL660c, and many others.
- HPE Synergy: The adapter is compatible with HPE Synergy compute modules, helping to provide high-speed networking for converged workloads.
- HPE Apollo: The adapter is compatible with HPE Apollo systems, including Apollo 2000, Apollo 6000, and others.
To ensure compatibility, it is important to check the HPE website for the latest information on supported servers and systems. In addition, it is recommended to use the latest drivers and firmware updates to ensure optimal performance and compatibility with HPE servers and systems.
The HPE Ethernet 10/25GB 2-Port 640FLR-SFP28 Adapter with part number 817748-B21 is a versatile adapter that can be used with a wide range of HPE servers and systems, providing high-speed networking for demanding workloads.
General Information
- Device Type : Network Adapter
- Form Factor : Plug-In Card
- Interface (Bus) Type : Flexiblelom
- Pci Specification Revision : Pcie 3.0
Networking
- Ports : 25 Gigabit Ethernet X 2
- Connectivity Technology : Wired
- Data Link Protocol : 10 Gige, 25 Gigabit Lan
- Data Transfer Rate : 25 GBPS
- Performance : Bidirectional Throughput: 100 Gbps ¦ Bandwidth Per Port: 50 Gbps
- Capacity : Jumbo Frame Size: Up To 9.2 KB
- Remote Management Protocol : Snmp
- Status Indicators : Link/Activity
- Features : Vlan Support, Ipv6 Support, Full Duplex Mode, Tcp/Ip Offloading, Quality Of Service (Qos), Jumbo Frames Support, Ipv4 Support, Pxe Support, Lacp Support, Lldp Support, Large Send Offload (Lso), Receive Side Scaling (Rss), Uefi Support, Tcp Segmentation Offload (Tso), Qos Tagging, Extended Message-Signaled Interrupts (Msi-X), Udp/Ip Offloading, Tcp/Ip Checksum Offload, Rdma Over Converged Ethernet (Roce), Virtual Extensible Lan (Vxlan), Network Virtualization Using Generic Routing Encapsulation (Nvgre), Rdma Over Converged Ethernet (Roce) V2
- Compliant Standards : IEEE 802.1q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (Lacp), IEEE 802.3ae, IEEE 802.1ab (Lldp), IEEE 802.3az, IEEE 802.1qbb, IEEE 802.1qaz, IEEE 802.1qau, IEEE 802.1qbg, IEEE 1588v2
Expansion / Connectivity
- Interfaces : 2 X 25gb Ethernet – Sfp28





