Description
More Information
The HPE 817753-B21 Ethernet 25GBPS 2 Ports 640SFP28 Network Adapter is a high-performance network adapter designed for use in Ethernet networks. It is a PCI Express 3.0 x8, low-profile, half-height form factor adapter that supports data transfer rates of up to 25 Gbps on each port, which is significantly faster than previous generation 10 Gbps adapters.
The adapter supports the latest SFP+ interface which is the 640SFP28 interface, designed for 25 GbE applications. This interface provides increased bandwidth and improved performance over previous SFP+ interfaces, allowing for faster data transfer and more efficient use of network resources.
The adapter also supports advanced features such as VXLAN, NVGRE, and GENEVE, which allow for network virtualization, improving network flexibility and scalability.
It is also compliant with IEEE 802.3by and 802.3bj standards, ensuring that it is compatible with a wide range of Ethernet equipment and that it meets the requirements of these standards, which are designed to ensure reliable data transfer.
The 817753-B21 also supports full duplex data transfers, which allows for simultaneous data transfer in both directions. This feature increases the data transfer rate and allows for faster data transfer, reducing the time it takes to complete data transfer tasks.
In terms of power efficiency, the adapter supports Energy Efficient Ethernet (EEE) and DMA Coalescing, which helps to reduce power consumption, making it more energy efficient.
Reliability and Durability
The HPE 817753-B21 Ethernet 25GBPS 2 Ports 640SFP28 Network Adapter is designed to provide high reliability and durability for Ethernet networks.
One of the key features that contribute to its reliability is its compliance with the IEEE 802.3by and 802.3bj standards. This ensures that the adapter is compatible with a wide range of Ethernet equipment, and that it meets the requirements of these standards, which are designed to ensure reliable data transfer.
The adapter is also built to meet the demands of Ethernet networks and is designed to be hot-pluggable, allowing for easy installation and maintenance without the need to power down the server. This feature allows for easy replacement of the adapter without any disruption to the network, making it easier to maintain and update the network without interruption, ensuring that the network is always running at optimal performance.
The 817753-B21 has been tested to meet the high standards of HPE’s extensive qualification process, which includes testing under extreme conditions to ensure the adapter can withstand the rigors of a data center environment, providing high-reliability and durability.
In addition, the adapter supports Energy Efficient Ethernet (EEE) and DMA Coalescing, which helps to reduce power consumption, making it more energy efficient, and reduces the stress on the adapter, prolonging its lifespan.
Power Efficiency
The HPE 817753-B21 Ethernet 25GBPS 2 Ports 640SFP28 Network Adapter is designed to be power efficient.
One of the key features that contribute to its power efficiency is its support for Energy Efficient Ethernet (EEE) and DMA Coalescing. Energy Efficient Ethernet is a set of standards that reduces the power consumption of Ethernet equipment when it is not transmitting or receiving data. DMA Coalescing is a technique that reduces the number of DMA operations required to transfer data, which in turn reduces the power consumption of the adapter.
The 817753-B21 also supports a low-power idle mode, which reduces the power consumption when the adapter is not in use.
The adapter is also built to meet the demands of Ethernet networks and is designed to be hot-pluggable, allowing for easy installation and maintenance without the need to power down the server. This feature allows for easy replacement of the adapter without any disruption to the network, making it easier to maintain and update the network without interruption, reducing the power consumption by avoiding unnecessary shut downs.
In addition, the adapter supports advanced features such as VXLAN, NVGRE, and GENEVE, which allow for network virtualization, improving network flexibility and scalability. This feature allows for easy creation of multiple virtual networks on a single physical network, improving network segmentation and security, this helps in reducing the power consumption by avoiding unnecessary traffic.
Detail Description 817753-B21 HPE
- Manufacturer: HPE
- MPN: 817753-B21
- Type: Networking
- Adapter-Type: Network Adapter 2Ports
- SKU: 817753-B21
- Spare Part Number: 840140-001
- Form Factor: Plug-in card – low profile
- Interface (Bus) Type: PCI Express 3.0 x8 / PCI Express 3.0 x4
- PCI Specification Revision: PCIe 3.0
Networking
- Ports: 25 Gigabit Ethernet x 2
- Connectivity Technology: Wired
- Data Link Protocol: 10 GIGE, 25 Gigabit LAN
- Data Transfer Rate: 25 GBPS
- Performance: Bidirectional throughput: 100 Gbps, Bandwidth per port: 50 Gbps
- Capacity: Jumbo frame size: up to 9.6 KB
- Remote Management Protocol: SNMP
- Status Indicators: Link/activity
- VLAN support, IPv6 support, full duplex mode, TCP/IP offloading, Quality of Service (QoS), Jumbo Frames support, IPv4 support, PXE support, LACP support, LLDP support, Large Send Offload (LSO), Receive Side Scaling (RSS), UEFI support, TCP Segmentation Offload (TSO), QoS tagging, Extended Message-Signaled Interrupts (MSI-X), UDP/IP offloading, TCP/IP checksum offload, RDMA over Converged Ethernet (RoCE), Virtual Extensible LAN (VXLAN), Network Virtualization using Generic Routing Encapsulation (NVGRE), RDMA over Converged Ethernet (RoCE) v2
- Compliant Standards: IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, IEEE 802.1Qbg, IEEE 1588v2
Expansion / Connectivity
- Interfaces: 2 x 25Gb Ethernet – SFP28
- Processor / Memory
- Processor: 1 x Mellanox ConnectX-4 Lx – Mellanox Technologies
Power
- Power Consumption Operational: 9.7 Watt
Miscellaneous
- Compliant Standards: FCC Class A certified, CISPR 22 Class A, ICES-003, EN55024, EN 60950-1, RoHS, ACA, cTUVus, BSMI Class A, VCCI Class A, EN 55022 Class A
Product Dimensions & Weight
- Width: 2.7 inch
- Height: 1 inch
- Depth: 5.8 inch
- Weight: 1.00 lbs
Software / System Requirements
- OS Required: SuSE Linux Enterprise Server 11, Microsoft Windows Server 2012, Oracle Solaris 11.1, Microsoft Windows Server 2012 R2, VMware ESXi 5.5, Ubuntu 14.04, Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 6.6, Red Hat Enterprise Linux 7.1, Citrix XenServer 6.5, SuSE Linux Enterprise Server 12, Red Hat Enterprise Linux 6.7, Red Hat Enterprise Linux 7.2, VMware ESXi 6.0
Environmental Parameters
- Min Operating Temperature: 41 °F
- Max Operating Temperature: 140 °F
- Humidity Range Operating: 5 – 95% (non-condensing)
Compatibility 817753-B21 HPE Ethernet 10GBPS
- HPE Apollo 4000 Series: 4200 Gen9, 4510 Gen10, 4510 Gen9, 4530 Gen9
- HPE ProLiant DL Series: DL120 Gen9, DL120 Gen9 Entry, DL160 Gen9, DL160 Gen9 Base, DL160 Gen9 Entry, DL160 Gen9 Performance, DL180 Gen9, DL180 Gen9 Base, DL180 Gen9 Entry, DL180 Gen9 Storage, DL360 Gen10, DL360 Gen10 Base, DL360 Gen10 Entry, DL360 Gen10 High Performance, DL360 Gen10 Low, DL360 Gen10 Performance, DL360 Gen9, DL360 Gen9 Base, DL360 Gen9 CMS, DL360 Gen9 Entry, DL360 Gen9 Performance, DL360 Gen9 Special Server, DL380 Gen9, DL380 Gen9 Base, DL380 Gen9 Entry, DL380 Gen9 High Performance, DL380 Gen9 Performance, DL560 Gen10, DL560 Gen10 Base, DL560 Gen10 Entry, DL560 Gen10 Performance, DL560 Gen9, DL560 Gen9 Base, DL560 Gen9 Entry, DL560 Gen9 Performance, DL580 Gen9, DL580 Gen9 Base, DL580 Gen9 Database, DL580 Gen9 High Performance, DL580 Gen9 SAP HANA Scale-up Base Configuration
- HPE ProLiant ML Series:ML350 Gen10, ML350 Gen10 Base, ML350 Gen10 Entry, ML350 Gen10 Performance, ML350 Gen10 Solution, ML350 Gen10 Sub-Entry
- HPE ProLiant XL Series:XL230k Gen10 Compute Tray, XL250a Gen9, XL250a Gen9 Accelerator Tray, XL450 Gen10
- HPE StoreEasy 1850, 3850 Gateway Single Node







