Description
Installation Process
installation process of the HPE 819200-001 8TB Internal Hard Drive will depend on the specific server system it is being installed in, but generally the process will involve the following steps:
- Power down the server and disconnect any cables or accessories that may interfere with the installation process.
- Locate the hard drive bays on the server chassis and remove any existing drives that may be in the bay where you intend to install the new drive.
- Attach the necessary mounting brackets or screws to the new hard drive so that it can be securely installed in the drive bay.
- Carefully slide the new hard drive into the drive bay, ensuring that it is fully seated and properly aligned with the backplane connector or SATA port.
- Reconnect any cables that may have been removed during the installation process, including power and data cables.
- Power on the server and access the server’s BIOS or RAID configuration utility to verify that the new hard drive has been detected and is properly configured.
- If necessary, initialize the hard drive and create any required partitions or logical volumes using the server’s disk management tools.
- Once the installation is complete, perform any necessary testing to ensure that the new hard drive is functioning properly and is integrated into the server’s storage subsystem.
It is important to follow the specific instructions provided by the server manufacturer or HPE when installing the 819200-001 hard drive, as improper installation can lead to data loss or other issues. If you are uncertain about the installation process, it may be helpful to consult the server or hard drive documentation, or seek the assistance of a qualified IT professional.
RAID Configuration
RAID (Redundant Array of Inexpensive Disks) is a technology used to improve the performance, reliability, and availability of data storage systems. The HPE 819200-001 8TB Internal Hard Drive can be configured to operate in various RAID modes, depending on the specific server system and the desired level of performance, data protection, and capacity.
Here are some common RAID configurations that can be used with the HPE 819200-001 internal hard drive:
- RAID 0 – This mode provides increased performance by striping data across multiple hard drives without any redundancy. This mode is not recommended for systems that require high data reliability as a single hard drive failure will result in the loss of all data.
- RAID 1 – This mode provides data redundancy by mirroring data across two hard drives. Data is written simultaneously to both hard drives, providing protection against data loss in the event of a single hard drive failure. However, this mode requires at least two hard drives and has reduced storage capacity due to the mirrored data.
- RAID 5 – This mode provides both performance and data redundancy by striping data across multiple hard drives while also providing parity data that can be used to recover data in the event of a single hard drive failure. This mode requires at least three hard drives and provides increased storage capacity over RAID 1.
- RAID 6 – This mode is similar to RAID 5 but provides increased data redundancy by storing two sets of parity data, which can protect against the failure of up to two hard drives. This mode requires at least four hard drives and provides even higher data reliability than RAID 5.
- RAID 10 – This mode provides both data redundancy and increased performance by striping data across multiple sets of mirrored hard drives. This mode requires at least four hard drives and provides higher data reliability than RAID 5 or RAID 6 while also providing faster read/write speeds.
The specific steps for configuring RAID with the HPE 819200-001 internal hard drive will depend on the server system being used and the RAID controller being used to manage the hard drives. It is important to carefully follow the manufacturer’s instructions and ensure that all necessary drivers and firmware are up-to-date to ensure proper operation of the RAID configuration.
SMART Technology The HPE 819200-001 8TB Internal Hard Drive is equipped with SMART (Self-Monitoring, Analysis, and Reporting Technology) features that provide early warning signs of potential problems with the hard drive. SMART technology continuously monitors various parameters of the hard drive, including the drive’s internal temperature, the number of read/write errors, and other operational statistics.
Some of the key features of SMART technology include:
- Early Warning System: SMART technology provides early warning signs of potential problems with the hard drive, allowing IT administrators to take proactive measures to avoid data loss or downtime.
- Automatic Diagnostics: SMART technology can automatically perform diagnostic tests on the hard drive, detecting and reporting any issues that may affect the drive’s performance or reliability.
- Performance Monitoring: SMART technology can monitor the performance of the hard drive, providing information about the read/write speeds and other operational parameters that may indicate potential issues.
- Predictive Failure Analysis: SMART technology uses predictive algorithms to analyze the data collected by the hard drive, predicting the likelihood of drive failure and providing recommendations for preventative maintenance or replacement.
By using SMART technology, IT administrators can proactively monitor the health and performance of the HPE 819200-001 internal hard drive, helping to prevent data loss and minimize downtime. It is important to regularly review the SMART data and take appropriate action if any potential issues are detected.
General Information
- Manufacturer: HPE
- MPN: 819200-001
- Type: Internal Hard Disk Drive (HDD)
- HDD Type: SATA 6GBPS
- SKU: 819200-001
- Option Part Number: 819203-B21
Technical Information
- Capacity: 8 TB
- Form Factor: 3.5 Inch LFF
- Bytes per Sector: 512
- Drive Technology (Fill): Air
- Plug Type: Hot Plug
- Format Type: 512e
- Carrier Type: Smart Carrier (SC)
- Workload Type: Midline
- Features: Native Command Queuing (NCQ), Advanced Format 512e
- Bundled With: HPE SmartDrive carrier
Performance
- Drive Transfer Rate: 6 Gb/Sec (External)
- Average Seek Time: 8.5 ms
- Max Seek Time: 15.7 ms
- Track-to-Track Seek Time: 0.7 ms
- Spindle Speed: 7200 RPM
- Max Sequential Throughput (MiB/s): 230
- 128Kib Random Read (IOPs): 105
- 128Kib Random 70% RD/ 30% WT (IOPs): 110
- 128Kib Random 50% RD/ 50% WT (IOPs): 115
Expansion & Connectivity
- Interfaces: 1 x SATA 6 Gb/s – 7 pin Serial ATA
- Compatible Bays: 1 x 3.5 Inch LFF – Hot-Swap
Power
- Idle Time: 8.8 Watt
- Random R/W: 12.1 Watt
- Sequential Read: 10.8 Watt
- Sequential Write: 10.5 Watt
Dimension and Weight
- Width : 4 Inch
- Depth : 5.8 Inch
- Height : 1 Inch
- Weight : 1.52 Lbs
Environmental Parameters
- Min Operating Temperature: 50 °F
- Max Operating Temperature: 95 °F
Compatibility Information
- HPE ProLiant DL Series: DL180 Gen9 (3.5 Inch), DL180 Gen9 Base (3.5 Inch), DL180 Gen9 Entry (3.5 Inch), DL180 Gen9 Storage (3.5 Inch), DL20 Gen9 Solution (3.5 Inch), DL360 Gen10 (3.5 Inch), DL360 Gen10 Base (3.5 Inch), DL360 Gen10 Entry (3.5 Inch), DL360 Gen10 High Performance (3.5 Inch), DL360 Gen10 Low (3.5 Inch), DL360 Gen10 Performance (3.5 Inch), DL360 Gen10 Solution (3.5 Inch), DL380 Gen10 (3.5 Inch), DL380 Gen10 Base (3.5 Inch), DL380 Gen10 Entry (3.5 Inch), DL380 Gen10 High Performance (3.5 Inch), DL380 Gen10 Performance (3.5 Inch), DL380 Gen10 Solution (3.5 Inch), DL385 Gen10 (3.5 Inch), DL385 Gen10 Base (3.5 Inch), DL385 Gen10 Entry (3.5 Inch), DL385 Gen10 High-Performance (3.5 Inch), DL385 Gen10 Performance (3.5 Inch), DL385 Gen10 Solution (3.5 Inch), DL388 Gen9 (3.5 Inch), DL388 Gen9 Base (3.5 Inch), DL80 Gen9 Entry (3.5 Inch)
HPE ProLiant ML Series: ML110 Gen9 (3.5 Inch), ML110 Gen9 Base (3.5 Inch), ML110 Gen9 Entry (3.5 Inch), ML30 Gen9 Entry (3.5 Inch), ML30 Gen9 Solution (3.5 Inch)
