Description
Dynamic Device Personalization Support
Dynamic Device Personalization (DDP) is a technology that enables the 840138-001 HPE Ethernet 10GB 2Port 562FLR T Network Adapter to provide optimized performance for specific workloads. This technology allows the adapter to recognize and classify network traffic based on the application, protocol, and service type, and then apply specific rules to prioritize and route that traffic.
DDP is a feature that can be used to optimize the performance of network-intensive applications such as virtualized environments, database applications, and storage traffic. By recognizing and prioritizing traffic for these types of workloads, DDP can help to reduce latency and improve overall network performance.
The 840138-001 HPE Ethernet 10GB 2Port 562FLR T Network Adapter supports DDP through the use of customized Application Specific Integrated Circuits (ASICs) and firmware, which enable the adapter to perform real-time traffic analysis and classification.
DDP support on the 840138-001 HPE Ethernet 10GB 2Port 562FLR T Network Adapter is a powerful feature that can help organizations to optimize network performance and improve the efficiency of their network infrastructure.
Fibre Channel Over Ethernet Support
Fibre Channel Over Ethernet (FCoE) is a technology that allows Fibre Channel traffic to be carried over Ethernet networks. The 840138-001 HPE Ethernet 10GB 2Port 562FLR T Network Adapter supports FCoE, which means it can be used to connect Fibre Channel storage devices to an Ethernet network.
By using FCoE, organizations can consolidate their storage and network infrastructure, reducing the number of adapters and cables required and simplifying management. FCoE also allows for greater scalability and flexibility, as it can support a larger number of devices and allows for more efficient use of available bandwidth.
The 840138-001 HPE Ethernet 10GB 2Port 562FLR T Network Adapter supports FCoE through the use of hardware-based protocol offload engines, which enable it to perform real-time processing of Fibre Channel traffic. This results in lower latency and higher performance compared to software-based solutions.
FCoE support on the 840138-001 HPE Ethernet 10GB 2Port 562FLR T Network Adapter is a valuable feature for organizations that need to connect Fibre Channel storage devices to an Ethernet network, as it can provide greater efficiency, scalability, and flexibility.
Advanced Error Detection and Correction
Advanced Error Detection and Correction (EDAC) is a feature that helps to identify and correct errors that may occur during data transmission. The 840138-001 HPE Ethernet 10GB 2Port 562FLR T Network Adapter includes advanced EDAC features to help ensure data integrity and reduce the risk of data loss or corruption.
The EDAC features of the 840138-001 HPE Ethernet 10GB 2Port 562FLR T Network Adapter include both hardware-based and software-based error detection and correction mechanisms. The hardware-based mechanisms use specialized hardware components to detect and correct errors at the physical layer of the network, while the software-based mechanisms use advanced algorithms to detect and correct errors at the data link and transport layers.
In addition to error detection and correction, the 840138-001 HPE Ethernet 10GB 2Port 562FLR T Network Adapter also includes other advanced features to help ensure data integrity and reliability, such as support for multiple checksum offload mechanisms and intelligent interrupt coalescing.
The advanced EDAC features of the 840138-001 HPE Ethernet 10GB 2Port 562FLR T Network Adapter help to ensure that data is transmitted accurately and reliably, even in environments with high levels of network traffic and potential for errors. This can be particularly important in applications where data integrity is critical, such as financial transactions, medical records, and other mission-critical systems.
General Information about the HPE 840138-001
- Manufacturer: HPE
- Part Number or SKU# 840138-001
- Option Part Number: 817745-B21
- Product Type: Network Adapter
Technical Information
- Ports: 10GB Ethernet x 2
- Form Factor: FlexibleLOM
- Interface (Bus) Type: PCI Ecpress 3.0 x4
- Network Processor: Intel X550-AT2
- Data Rate: Two ports – each at 20 GBPS bi-directional; 40 GBPS bi-directional theoretical bandwidth
- IEEE Compliance: 802.3ad, 802.3X, 802.1q, 802.1Qau, 802.1Qaz, 802.1Qbb, 802.1Qbg, IEEE1588, 802.1AS
- Connector: RJ-45 (two)
Networking
- Connectivity Technology: Wired
- Data Link Protocol: 10 GIGE
- Data Transfer Rate: 10 GBPS
- Firewall protection, wake on LAN (WOL), IPv6 support, Jumbo Frames support, IPv4 support, PXE support, Single Root I/O Virtualization (SR-IOV), TCP Segmentation Offload (TSO), secure boot, Network Partitioning (NPAR), HPE Sea of Sensors 3D, IPv6 acceleration, firmware root of trust, audit logs, tunnel offload, generic segmentation offload (GSO)
Expansion / Connectivity
- Expansion Slots: 1 x FlexibleLOM
- Interfaces: 2 x 10GB Ethernet – RJ-45
Processor / Memory
- Processor: 1 x X550-AT2 – Intel
Power
- Power Consumption Operational (Typical): 10.50 Watt
- Power Consumption Operational (Maximum): 14.50 Watt
Miscellaneous
- Included Accessories: Low-Profile Bracket
- Compliant Standards: WEEE, RoHS, CE, Microsoft WHQL (Windows Hardware Quality Labs)
- RoHS Compliance: 6 of 6
Dimensions & Weight
- Width: 2.25 inch
- Height: 7.50 inch
- Depth: 9.50 inch
- Weight: 1.00 lbs
Environmental Parameters
- Temperature (Operating): 5° to 60° C / 41° to 140° F
- Temperature (Non-Operating): -40°C to 70°C / -40°F to 158°F
- System Relative Humidity (Operating): Minimum to be the higher (more moisture) of -12°C(10.4°F) dew point or 8% relative humidity. Maximum to be the lower (less moisture) of 24°C (75.2°F) dew point or 90% relative humidity. (Non-condensing)
- Humidity (Non-operating): 5 to 95% relative humidity (non-condensing)
Compatibility
- HPE ProLiant DL Series: DL120 Gen10, DL160 Gen10, DL180 Gen10, DL360 Gen10, DL380 Gen10, DL385 Gen10, DL560 Gen10, DL580 Gen10 Servers
- HPE Apollo 2000 Series: 2000 XL170r Gen10 and 2000 XL190r Gen10 Servers
- HPE Apollo 4500 XL450 Gen10 Server
