Description
Midline Hard Drive
A midline hard drive is a type of hard drive that offers a balance between performance and cost. It is designed to provide reliable storage for applications that do not require high-speed data access, such as backup, archiving, and data warehousing. Midline hard drives typically have a slower rotational speed than performance hard drives, but they also have larger storage capacities and lower prices. They are often used in servers and storage arrays where cost-effectiveness is a priority. The HPE 10TB 7.2K RPM 3.5Inch DS SATA-6GBPS LPC Midline G9 G10 Hard Drive is an example of a midline hard drive that is compatible with HPE Gen9 and Gen10 servers.
Maintenance and Serviceability
The HPE 10TB 7.2K RPM 3.5Inch DS SATA-6GBPS LPC Midline G9 G10 Hard Drive is designed for ease of maintenance and serviceability. Here are some of the features that make it easy to maintain and service:
- Hot-plug capability: The drive can be replaced or added to the system while it is running, without shutting down the server.
- Tool-less drive tray: The drive tray is designed to be easily removed and replaced without any tools, making it easy to service.
- Built-in self-test: The drive has a built-in self-test that can help diagnose any problems with the drive.
- Compatibility: The drive is designed to work seamlessly with HPE ProLiant servers, making it easy to replace or upgrade.
- Warranty and support: The drive comes with a warranty and HPE support, making it easy to get help if there are any issues with the drive.
Energy Efficiency and Power Consumption
The HPE 857650-K21 10TB hard drive is designed for energy efficiency and low power consumption. The drive operates at a speed of 7.2K RPM and is built using the latest technology to ensure optimal performance with minimal power usage.
The drive is equipped with advanced power management features, such as Idle Power Management, which helps to reduce power consumption when the drive is not in use. It also supports SATA-6GBPS LPC technology, which enables the drive to transfer data at high speeds while consuming less power.
General Information
- Manufacturer Name : HPE
- MPN: 857650-K21
- Type: Internal Hard Drive
- SSD Type: SATA 6 GBPS
- SKU: 857650-K21
- Spare Part Number: 857968-001
- Model Number: MB010000GWAYN
- Assembly Number: 857643-002
- HPE GPN: 857653-002
Technical Information
- Device Type: Hard Drive – Hot-Swap
- Capacity: 10 TB
- Form Factor: 3.5 inch LFF
- Interface: SATA 6Gbps
- Bytes per Sector: 512
- Drive Technology (Fill): Helium
- Plug Type: Hot Plug
- Format Type: 512e
- Carrier Type: Low Profile Carrier
- Workload: Midline
- Features: Advanced format 512e, Digitally Signed Firmware
- Bundled with: HPE Low Profile Carrier
Performance
- Rotational Speed: 7200 RPM
- Transfer Rate Synchronous (Max): 6Gb/sec
- Single Track Seek Time: 0.22 ms
- Average Seek Time: 8.00 ms
- Full Stroke Seek Time: 16.00 ms
Expansion & Connectivity
- Interfaces: 1 x SATA 6 Gb/s – 7 pin Serial ATA
- Compatible Bay: 3.5″ LFF Low Profile
Environmental Parameters
- Min Operating Temperature: 50 °F (10°C)
- Max Operating Temperature: 95 °F (35°C)
Dimensions and Weight
- Width : 4 Inch
- Depth : 5.8 Inch
- Height : 1 Inch
- Weight : 1.52 Lbs
Compatibility Information
- HPE Apollo: 4200 Gen9 (3.5 inch), 4510 Gen9 (3.5 inch), 4520 Gen9 (3.5 inch) and 4530 (3.5 inch) Servers
- HPE ProLiant ML Series: ML110 Gen10 (3.5 inch), ML110 Gen10 Performance (3.5 inch), ML110 Gen10 Solution (3.5 inch), ML350 Gen10 (3.5 inch), ML350 Gen10 Base (3.5 inch), ML350 Gen10 Entry (3.5 inch), ML350 Gen10 Performance (3.5 inch), ML350 Gen10 Solution (3.5 inch), ML350 Gen10 Sub-Entry (3.5 inch) Servers





