Description
Easy Installation and Configuration
Installing and configuring the HPE 874576-B21 ML350 Gen10 SAS 12GB Expander Card Kit is a straightforward process that requires the following steps:
- Physical Installation:
- Before installation, make sure to power off the server and disconnect all cables.
- Remove the server cover and locate an available PCI Express slot.
- Carefully insert the expander card into the slot and secure it with the retaining screw.
- Replace the server cover and reconnect all cables.
- Power on the server.
- BIOS Configuration:
- Boot the server and press the F10 key to enter the BIOS setup.
- Navigate to the Advanced tab and select SAS Controller Configuration.
- Enable the newly installed SAS Controller.
- Save and Exit the BIOS setup.
- Software Configuration:
- Boot the server into the operating system.
- Install the necessary drivers and management software for the SAS Controller.
- Launch the management software and check that the expander card is recognized and functioning properly.
Improved Reliability and Scalability
The HPE 874576-B21 ML350 Gen10 SAS 12GB Expander Card Kit has been designed to improve the reliability and scalability of HPE ML350 Gen10 servers. This kit includes a SAS expander card that is fully compatible with HPE ML350 Gen10 servers, and it provides 12 GB of SAS data transfer speed, which is significantly faster than previous versions of this kit. The SAS expander card has been optimized for high performance and maximum reliability, making it ideal for use in data centers and other demanding computing environments.
The kit has been designed to be scalable, which means that it can be easily expanded or upgraded as your needs change. This is important because as your data storage requirements grow, you can add additional storage devices to your server without having to replace the entire system. This helps you to avoid costly downtime and allows you to maximize your return on investment.
The HPE 874576-B21 ML350 Gen10 SAS 12GB Expander Card Kit has also been engineered to provide enhanced reliability, which is critical in data centers where downtime is unacceptable. The kit is designed to minimize the risk of hardware failure, and it provides robust error correction and data protection features that help to ensure that your data remains safe and secure.
In conclusion, the HPE 874576-B21 ML350 Gen10 SAS 12GB Expander Card Kit provides a powerful, reliable and scalable solution for HPE ML350 Gen10 servers. It is ideal for use in data centers and other demanding computing environments, and it provides the performance, scalability and reliability that you need to support your growing data storage needs.
Support for Up to 24 SAS Devices
The HPE 874576-B21 ML350 Gen10 SAS 12GB Expander Card Kit is designed to support up to 24 SAS devices. This expansion card enables you to connect additional SAS devices such as hard disk drives (HDD) or solid-state drives (SSD) to your HPE ML350 Gen10 server, providing additional storage capacity for your applications and data. The 12GB SAS technology provides fast data transfer speeds, ensuring efficient performance for demanding applications and tasks. With the ability to support up to 24 SAS devices, the HPE 874576-B21 ML350 Gen10 SAS 12GB Expander Card Kit is an ideal solution for expanding your storage capabilities and increasing your server’s overall performance.
General Information about this HPE 874576-B21
- Manufacturer: HPE
- Part Number or SKU# 874576-B21
- Type: Controller
- Sub-Type: SAS Controller
Technical Information of SAS Controller
- Device Type : Storage Controller Upgrade Card
- Interface : SAS 12GB/S
- Data Transfer Rate : 12 GBPS
- Designed For : Proliant Ml350 Gen10, Ml350 Gen10 Base, Ml350 Gen10 Entry, Ml350 Gen10 Performance, Ml350 Gen10 Sub-Entry
