Shop All: HPE

For bulk orders contact sales via email sales@allhdd.com, via chat, or call our toll-free number 1-800-675-5044.

AD386A HPE Pcie 10GB Ethernet Adapter | Refurbished

$125.00

1 in stock

SKU: AD386A Category: 10 Gigabit Brand: HPE

Description

Installation and Configuration

The AD386A HPE PCIe 10GB Ethernet Adapter is a high-speed network interface card designed for use in HPE servers. Here are the steps to install and configure the adapter:

Installation

Power off the server and disconnect all cables.
Remove the server cover and locate an available PCIe slot.
Remove the bracket covering the PCIe slot and insert the adapter into the slot.
Secure the adapter to the chassis using the bracket that came with the adapter.
Reconnect all cables and power on the server.

Configuration

Boot the server and log in to the operating system.
Install the latest drivers for the AD386A adapter from the HPE website.
Configure the network settings in the operating system, including the IP address, subnet mask, and default gateway.
If necessary, configure any additional network settings, such as VLAN tagging or teaming, using the appropriate tools for your operating system.

Network Performance Enhanced

The HPE AD386A PCIe 10GB Ethernet Adapter is a high-performance network interface card that provides fast data transfer rates and low latency for servers and workstations. Here are some tips for enhancing its network performance:

Update drivers: Ensure that you have the latest drivers installed for the adapter. You can check for driver updates on the HPE website or through the server/workstation manufacturer’s website.
Use high-quality cables: Ensure that you are using high-quality Ethernet cables that support 10Gbps speeds. Use Cat 6a or Cat 7 cables for the best performance.
Optimize network settings: Optimize the network settings on your server/workstation for maximum performance. Adjust settings such as packet size, flow control, and receive-side scaling (RSS) to ensure the best possible performance.
Enable jumbo frames: Enabling jumbo frames can help improve network performance by reducing the overhead associated with smaller packet sizes. Check with your network administrator to ensure that jumbo frames are supported on your network.
Use quality-of-service (QoS): Use QoS to prioritize traffic on your network. This ensures that important traffic, such as video conferencing or VoIP, is given higher priority over less critical traffic, such as file transfers.
Enable hardware offloading: Hardware offloading can help reduce the workload on the server’s CPU by offloading tasks such as packet checksum calculations to the network adapter. This can help improve overall system performance.
Consider using teaming: Teaming multiple network adapters together can help improve performance and provide redundancy in case of a hardware failure. Check with your network administrator to ensure that teaming is supported on your network.

By following these tips, you can help enhance the network performance of your HPE AD386A PCIe 10GB Ethernet Adapter and achieve maximum performance from your server or workstation.

Reliability and Durability

The AD386A HPE PCIe 10GB Ethernet Adapter is a high-quality network interface card designed to provide reliable and durable performance in HPE servers. Here are some key factors that contribute to its reliability and durability:

High-quality components: The AD386A adapter is built with high-quality components that are designed to withstand the rigors of server use. This includes the use of high-quality circuit boards, connectors, and other components that are built to last.
Rigorous testing: HPE performs rigorous testing on all of its network adapters, including the AD386A, to ensure that they meet high standards for performance, reliability, and durability. This includes testing under a wide range of conditions to ensure that the adapter can withstand the demands of different server environments.
Advanced features: The AD386A adapter includes advanced features such as TCP/IP offloading and virtualization support, which can help to reduce the load on the server’s CPU and improve overall performance. These features are designed to work reliably and consistently, even under heavy workloads.
Warranty and support: The AD386A adapter comes with a manufacturer’s warranty that covers defects in materials and workmanship for a specified period of time. Additionally, HPE provides comprehensive support for its network adapters, including technical support and assistance with installation and configuration.

General Information