Description
Installation and Configuration of HPE MSA 2040 Transceiver
The C8R23A HPE MSA 2040 8GB Short Wave Fibre Channel SFP+ 4 Pack Transceiver is a set of four small form-factor pluggable (SFP+) transceivers designed for use with the HPE MSA 2040 storage system. These transceivers provide high-speed connectivity over short distances using fibre optic cables.
Here are the steps to install and configure these transceivers:
- Shut down the HPE MSA 2040 storage system and disconnect it from the power source.
- Locate the SFP+ ports on the storage system. They are typically found on the back of the unit and may be labeled as Fibre Channel ports.
- Remove the protective cover from each SFP+ port.
- Insert the C8R23A transceivers into the SFP+ ports on the storage system. Ensure that each transceiver is securely seated in the port.
- Connect the fibre optic cables to the transceivers. Ensure that the cables are properly aligned with the transceiver ports and are securely connected.
- Power on the HPE MSA 2040 storage system.
- Log in to the system and configure the Fibre Channel ports to use the C8R23A transceivers. The specific configuration steps may vary depending on the system software being used. Refer to the HPE MSA 2040 documentation for guidance on configuring the Fibre Channel ports.
- Verify that the system recognizes the C8R23A transceivers and that they are functioning properly.
Troubleshooting and Maintenance
C8R23A is the product code for the HPE MSA 2040 8GB Short Wave Fibre Channel SFP+ 4 Pack Transceiver. This is a set of four small form-factor pluggable (SFP+) transceivers that are designed to be used with HPE MSA 2040 storage systems. These transceivers enable the connection of Fibre Channel devices to the storage system, allowing data to be transferred between them.
To troubleshoot and maintain the C8R23A transceivers, the following steps can be taken:
- Check the cables: Make sure that the cables connecting the transceivers to the storage system are securely plugged in and not damaged. If there are any signs of damage, replace the cables immediately.
- Check the transceiver ports: Check that the transceiver ports on the storage system are clean and free of any debris. If there is any debris, use a soft, dry cloth to clean the ports.
- Check the transceiver status: Check the status of the transceivers using the storage system’s management software. Look for any error messages or warnings related to the transceivers. If there are any issues, try reseating the transceivers or replacing them with new ones.
- Update the firmware: Check if there are any firmware updates available for the transceivers or the storage system. If there are updates, follow the manufacturer’s instructions to update the firmware.
- Contact support: If none of the above steps resolve the issue, contact HPE support for further assistance. Be sure to provide as much information as possible about the issue and the steps you have already taken to troubleshoot it.
Regular maintenance of the transceivers is also important to ensure optimal performance. This includes cleaning the ports, checking the cables for damage, and checking for firmware updates periodically. By following these steps, you can help ensure that your HPE MSA 2040 storage system continues to function smoothly and reliably.
Compatible Devices and Applications
C8R23A is a part number for an HPE MSA 2040 compatible transceiver. It is a 4-pack of SFP+ (Small Form-factor Pluggable Plus) transceivers that support 8GB Short Wave Fibre Channel connectivity.
These transceivers are compatible with a variety of devices that have SFP+ ports and support 8GB Short Wave Fibre Channel connectivity. The HPE MSA 2040 Storage system is one such device that supports these transceivers. Other devices that support SFP+ ports include switches, routers, and network interface cards.
The applications of these transceivers are primarily in storage and networking environments. They can be used to connect storage devices to a network, or to connect network switches and routers together. The 8GB Short Wave Fibre Channel technology offers high-speed data transfer rates and low latency, making it ideal for high-performance applications such as data backup and recovery, video streaming, and virtualization.
General Information
- Manufacturer: HPE
- MPN: C8R23A
- Spare Part Number: 717875-001
- Model Number: FTLF8528P3BCV-1H
- Assembly Number: 720998-001
- SKU: C8R23A
- Transceiver Type: SFP+ Transceiver Module
- Form Factor: Plug-in module
- Packaged Quantity: 4 (Specifications are for Single Item)
- Media Type Supported: Optical Fiber
- Transceiver Type: SFP+
Technical Information
- Cabling Type: Fibre Channel
- Connectivity Technology: Wired
- Data Link Protocol: 8Gb Fibre Channel (SW)
- Data Transfer Rate: 8.5 Gbps
- Ethernet Technology: 8 Gigabit Ethernet
Expansion / Connectivity
- Interfaces: 1 x 8Gb Fibre Channel (Short Wave)
- Ports Details: 1 x 8GBase-SW Network
- Compatible Slots: 1 x SFP+
Compatibility Information
- HPE Modular Smart Array 2040 10Gb iSCSI Dual Controller SFF Bundle, 2040 Dual Controller SFF Bundle, 2040 FC Dual Controller SFF Bundle, 2040 LFF Disk Enclosure, 2040 SAN Dual Controller LFF Storage, 2040 SAN Dual Controller SFF Bundle, 2040 SAN Dual Controller SFF Storage, 2040 SAS Dual Controller SFF Bundle, 2040 SFF Chassis, 2040 SFF DC-power Chassis
