Description
10,000 RPM Spindle Speed for Faster Data Access
A spindle speed of 10,000 RPM (Rotations Per Minute) is a common specification for high-performance hard disk drives used in servers, workstations, and other computing devices. This faster spindle speed allows for quicker data access, which can improve system performance and overall productivity.
In a hard disk drive, data is stored on spinning disks called platters. The platters rotate on a spindle, and data is read and written to the platters by read/write heads that move across the surface of the platters. The spindle speed determines how quickly the platters rotate, which in turn affects how quickly data can be accessed and transferred.
A spindle speed of 10,000 RPM is faster than the more common 7,200 RPM spindle speed found in consumer-grade hard disk drives. This faster spindle speed allows for quicker data access times, which can be particularly important in applications that require high-speed data processing, such as databases, virtualization, and other data-intensive workloads.
However, faster spindle speeds can also result in higher power consumption, increased heat generation, and increased wear and tear on the hard disk drive. In addition, hard disk drives with faster spindle speeds are typically more expensive than drives with slower spindle speeds.
RoHS and WEEE Compliance
RoHS (Restriction of Hazardous Substances) and WEEE (Waste Electrical and Electronic Equipment) are two regulations that address environmental concerns related to electronic products and their disposal.
RoHS is a European Union directive that restricts the use of certain hazardous materials in the manufacture of electronic and electrical equipment, including lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE). The RoHS directive aims to reduce the environmental impact of electronic products by restricting the use of hazardous substances that can harm human health and the environment.
WEEE is a European Union directive that requires manufacturers to take responsibility for the disposal of their electronic products at the end of their useful life. WEEE aims to reduce the amount of electronic waste that is sent to landfills or incinerated, which can release hazardous materials into the environment. Under the WEEE directive, manufacturers are required to ensure that their products are disposed of in an environmentally responsible manner, either through recycling or other appropriate means.
Compliance with RoHS and WEEE is important for businesses that manufacture or sell electronic products in the European Union or that export their products to the European Union. Failure to comply with RoHS and WEEE can result in legal and financial penalties, as well as damage to a company’s reputation.
To ensure compliance with RoHS and WEEE, businesses must carefully track the materials used in their products and ensure that they meet the requirements of the regulations. Businesses must also establish processes for the collection, treatment, and disposal of their electronic products at the end of their useful life.
Maximum Internal Data Transfer Rate
The maximum internal data transfer rate refers to the maximum speed at which data can be transferred between different components within a computing device, such as a hard disk drive, solid-state drive, or motherboard.
The maximum internal data transfer rate can be affected by a variety of factors, including the speed of the device’s interface, the capacity of the device’s cache, the efficiency of the device’s controller, and the performance of the device’s data path.
For example, the maximum internal data transfer rate of a hard disk drive can be affected by the speed of the drive’s interface, such as SATA or SAS, as well as the capacity of the drive’s cache and the efficiency of the drive’s controller. Similarly, the maximum internal data transfer rate of a solid-state drive can be affected by the speed of the drive’s interface, such as SATA or NVMe, as well as the performance of the drive’s controller and the quality of the drive’s NAND flash memory.
The maximum internal data transfer rate can be an important consideration for businesses and enterprises that require high-performance computing devices, such as servers or workstations. Devices with higher maximum internal data transfer rates can provide faster data processing, improved system performance, and greater productivity.
General Information
- Manufacturer: Hewlett Packard Enterprise (HPE)
- MPN: EG0450FCHHT
- Type: Hard Disk Drive (HDD)
- HDD Type: SAS-6GBPS 450GB-10K RPM
- SKU: EG0450FCHHT
Technical Information
- Storage Capacity: 450 GB
- Rotational Speed: 10K RPM
- Hard Drive Interface: 6GB/S SAS
- Form Factor: Internal
- Drive Width: 2.5
- Hot Pluggable: Yes
Dimension and Weight
- Width : 2.8 Inch
- Depth : 3.9 Inch
- Height : 0.6 Inch
- Weight : 0.50 LBS
Compatible Products For
- Bladesystem Proliant Server Blades
- HPE Proliant Bl460c Gen8 Server Series
- HPE Proliant Dl Servers
- HPE Proliant Dl160 Gen8 Server Series
- HPE Proliant Dl360p Gen8 Server Series
- HPE Proliant Dl380p Gen8 Server Series
- HPE Proliant Ml Servers
- HPE Proliant Ml350p Gen8 Server Series
- HPE Proliant Scalable Systems
- HPE Proliant Sl230s Gen8 Server Series
- HPE Proliant Sl250s Gen8 Server Series10,000 RPM Spindle Speed for Faster Data Access
