Description
Installation and Configuration
The J8177D is a HPE Aruba SFP (small form-factor pluggable) transceiver module that is used to connect devices to a network using fiber optic cables. To install the module, follow these steps:
- Power off the device that the transceiver module will be installed in.
- Locate the SFP module port on the device, and unlock the module by releasing the locking tab.
- Carefully insert the transceiver module into the SFP port, making sure that it is properly aligned and seated.
- Lock the module in place by pushing the locking tab back into place.
- Power on the device and check that the module is recognized and functioning properly.
To configure the module, you will need to access the device’s management interface, such as the command-line interface (CLI) or web interface, and enter the appropriate commands or settings. The configuration will depend on the device and the network that the module is connecting to. Consult the device’s documentation for specific instructions.
High Performance
The J8177D HPE Aruba SFP (Mini-Gbic) Transceiver Module is a high-performance optical transceiver module that is designed to work with HPE Aruba networking equipment. It is a small form-factor pluggable (SFP) module that is used to connect network devices to a fiber optic network.
The J8177D transceiver module is designed to support high-speed data transfer rates of up to 1 Gigabit per second (Gbps) over multimode fiber optic cable. It is compliant with industry standards such as IEEE 802.3z and supports a wide range of optical wavelength ranges, including 850nm, 1310nm, and 1550nm.
One of the key features of the J8177D transceiver module is its high performance. It is designed to provide low power consumption and high signal quality, making it suitable for use in high-density network environments. Additionally, it is designed to be easy to install and maintain, with a hot-swappable design that allows for easy replacement in the event of failure.
Interfaces
The J8177D HPE Aruba SFP (Mini-Gbic) Transceiver Module is a small form-factor pluggable (SFP) transceiver that provides a high-speed data interface for network devices. It is used to connect devices such as switches, routers, and servers to a network. The J8177D is specifically designed for use with HPE Aruba devices and is compatible with the Gigabit Ethernet standard.
The module has two main interfaces: the data interface and the management interface. The data interface is responsible for transmitting and receiving data packets over the network. It uses a small form-factor pluggable (SFP) connector to connect to the device’s network port. The management interface, on the other hand, is used to monitor and configure the transceiver’s settings and status. It can be accessed through a serial or an Ethernet port.
The J8177D HPE Aruba SFP (Mini-Gbic) Transceiver Module supports data rates of up to 1 Gbps, and has a maximum distance of 550 meters over multimode fiber. It also supports a wide range of temperature and humidity conditions, making it suitable for use in a variety of environments.
Detail Description Aruba J8177D
- Manufacturer: HPE
- Model Number or SKU# J8177D
- Type: Networking
- Transceiver -Type: GBIC-SFP
- SKU: J8177D
Networking J8177D
- Connectivity Technology : Wired
- Cabling Type : 1000base-T
- Data Link Protocol : GIGE
- Data Transfer Rate : 1 GBPS
- Max Transfer Distance : 328 Ft
- Expansion / Connectivity
- Interfaces : 1 X Ethernet 1000base-T – Rj-45
Dimensions & Weight
- Width: 2.7 inch
- Depth : 0.6 inch
- Height : 0.5 inch
- Weight : 1 lbs







