Description
Management and security
- The HPE JH018A 1420 10GBPS Ethernet Switch 24 Ports Rack-Mountable offers a variety of management and security features to help secure and manage your network. Some of these features include:
- Web-based management: Allows you to access and manage the switch remotely using a web browser.
- SNMP support: Allows you to monitor and manage the switch using SNMP-based management tools.
- CLI (Command Line Interface) support: Allows you to manage the switch using a command-line interface.
- Port security: Allows you to secure individual ports by limiting the number of MAC addresses that can be used on a port.
- 802.1X authentication: Allows you to authenticate users and devices before they can access the network.
- VLAN support: Allows you to create virtual LANs and segment your network for better security and performance.
- Quality of Service (QoS): Allows you to prioritize network traffic to ensure that important applications and services receive the bandwidth they need.
- Loop protection: Detects and prevents loops in the network, which can cause network outages.
- Link aggregation: Allows you to bundle multiple ports together to increase bandwidth and provide redundancy.
Network connectivity
The HPE JH018A 1420 10GBPS Ethernet Switch is a 24-port rack-mountable switch that offers high-speed network connectivity. It supports 10 Gigabit Ethernet (10GbE) connections and can be used to connect servers, storage devices, and other network devices. The switch also has 24 SFP+ ports for connecting to fiber-optic cables, and it supports both full-duplex and half-duplex modes. Additionally, it supports features such as Quality of Service (QoS), Link Aggregation Control Protocol (LACP), and Internet Group Management Protocol (IGMP) snooping to help optimize network performance and security.
Physical and environmental specifications
The HPE JH018A 1420 10GBPS Ethernet Switch 24 Ports Rack-Mountable has the following physical and environmental specifications:
Physical specifications:
- Dimensions: 44 x 4.4 x 28.5 cm (17.3 x 1.73 x 11.2 inches)
- Weight: 4.6 kg (10.1 lbs)
- Form factor: 1U rack-mountable
Environmental specifications:
- Operating temperature range: 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit)
- Storage temperature range: -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
- Operating humidity range: 10 to 90% non-condensing
- Altitude: Up to 3048 m (10,000 ft)
Power requirements:
- 100-240 VAC, 50/60 Hz
- Maximum power consumption: 88 W
Safety:
- UL 60950-1 2nd edition
- IEC 60950-1 2nd edition
- EN 60950-1 2nd edition
- CAN/CSA-C22.2 No. 60950-1-07 2nd edition
- AS/NZS 60950.1:2011
- GB4943-2011
EMC:
- FCC Part 15 Class A
- ICES-003 Class A
- EN 55022 Class A
- CISPR22 Class A
- AS/NZS CISPR22 Class A
- VCCI Class A
- EN 55024
- EN 61000-3-2
- EN 61000-3-3
- KN22 Class A
- CNS 13438 Class A
Telecommunications
- FCC Part 15 Class A
- IC Class A
- EN 55022 Class A
- CISPR22 Class A
- AS/NZS CISPR22 Class A
- VCCI Class A
- EN 55024
- EN 61000-3-2
- EN 61000-3-3
- KN22 Class A
- CNS 13438 Class A
Main Specification about the HPE JH018A
- Manufacturer: HPE
- Part Number or SKU # JH018A
- Device Type: Managed Switch
Product Information
- Enclosure Type : Desktop, Rack-Mountable – 1u
- Subtype : Gigabit Ethernet
- Ports : 24 X 10/100/1000 + 2 X 1 Gigabit / 10 Gigabit Sfp+
Performance
- Throughput (64-Byte Packet Size) : Up To 65.5 Mpps ¦ Switching Capacity : 88 Gbps
- Mac Address Table Size : 16384 Entries
- Jumbo Frame Support : 9216 Bytes
Features
- Flow Control, Auto-Negotiation, Auto-Uplink (Auto Mdi/Mdi-X), Half Duplex Mode, Full Duplex Mode, Quality Of Service (Qos), Fanless, 512kb Packet Buffer, Diffserv Code Point (Dscp) Support
- Compliant Standards : Ieee 802.3, Ieee 802.3u, Ieee 802.3i, Ieee 802.3ab, Ieee 802.1p, Ieee 802.3x
- Flash Memory : 8 Mb
Expansion / Connectivity
- Interfaces : 24 X 1000base-T – Rj-45 ¦ 2 X Gigabit / 10gbit Lan – Sfp+
