Description
Power Over Ethernet (PoE+) Technology
Power over Ethernet (PoE+) is a technology that allows Ethernet cables to carry both data and power to network-connected devices. This technology allows devices such as wireless access points, IP cameras, and phones to receive both power and data from a single Ethernet cable, eliminating the need for separate power cables and outlets.
PoE+ is an improvement over the original PoE (Power over Ethernet) technology and provides more power, typically up to 30 watts, to connected devices. This higher power level allows for the use of devices that require more power, such as high-power wireless access points, cameras with pan-tilt-zoom (PTZ) capabilities, and video phones.
The HPE JH328A#ABA 1420 5GBPS PoE+ Rack-Mountable 5 Ports Switch supports PoE+ technology, allowing you to easily power and connect PoE-enabled devices to your network.
Management and Configuration
Management and Configuration refer to the processes of administering, controlling, and setting up a network switch, such as the HPE JH328A#ABA 1420 5GBPS PoE+ Rack-Mountable 5 Ports Switch.
Management refers to the ongoing monitoring and control of the switch, such as setting up user accounts, monitoring traffic statistics, and checking for firmware updates. Management is performed using a graphical user interface (GUI) or a command-line interface (CLI), and often requires special software or tools provided by the manufacturer.
Configuration refers to the initial setup of the switch, including tasks such as setting up network interfaces, defining VLANs, configuring security settings, and specifying routing information. Configuration can be performed using the same GUI or CLI used for management, and the configuration settings are stored in the switch’s memory for future use. Proper configuration is critical for the proper operation of the switch and the network it supports.
Rack-Mountable Switch
A rack-mountable switch is a network switch that is designed to be mounted on a standard 19-inch equipment rack. These types of switches are commonly used in data centers, server rooms, and other network environments where multiple network devices are housed in a single rack or cabinet.
The rack-mountable form factor provides a compact and organized way to manage multiple network devices, while taking up minimal space in the rack. This design also enables easy maintenance and upgrades, as the switch can be easily removed from the rack for service.It saves space by being mounted in a compact form factor, and provides easy access to the front and rear ports of the switch.
Rack-mountable switches are commonly used in conjunction with other rack-mounted equipment, such as servers, storage devices, and patch panels, to create a streamlined and efficient network infrastructure.
General Information about the HPE JH328A#ABA
- Manufacturer: HPE
- Part Number: JH328A#ABA
- Type: Networking
- Sub-Type: Switch 5 Ports
- Device Type : Switch – 5 Ports – Unmanaged
- Enclosure Type : Desktop, Rack-Mountable 1u
- Ports : 5 X 10/100/1000
- Power Over Ethernet (POE) : POE+
- Performance : Switching Capacity : 10 GBPS ¦ Throughput (64-Byte Packet Size) : 7.4 MPPS ¦ Latency (100 MPPS ) : 3 µs ¦ Latency (1000 Base-T) : 2.6 µs
- Mac Address Table Size : 2048 Entries
- Jumbo Frame Support : 9216 Bytes
- Features : Flow Control, Full Duplex Capability, Auto-Negotiation, Auto-Uplink (Auto MDI/MDI-X), Half Duplex Mode, Quality Of Service (QOS), Fanless, Diffserv Code Point (DSCP) Support
- Compliant Standards : IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3at, IEEE 802.3az
- Power : Ac 120/230 V ( 50/60 Hz ) 300 Ma
- Flash Memory : 1 MB
Expansion / Connectivity
- Interfaces : 5 X 1000 Base-T – Rj-45
- Power Device : Internal Power Supply
- Voltage Required : Ac 120/230 V ( 50/60 Hz )
- Electric Current Required : 300 Ma
- Power Consumption Operational : 40 Watt
