Description
Large Storage Capacity (2TB) HDD
The MB2000EBUCF HPE hard drive is a 3.5 inch, large form factor (LFF) internal hard drive designed for use in servers. It has a storage capacity of 2 terabytes (TB), which means it can store a massive amount of data, including large files such as videos, images, and databases.
The 2TB capacity makes this hard drive ideal for applications that require large amounts of storage, such as data center storage, backup and archiving, and multimedia storage. It can also be used in RAID configurations to provide redundancy and improve overall system performance.
The MB2000EBUCF HPE hard drive has a rotational speed of 7,200 revolutions per minute (RPM), which allows for fast data access and transfer speeds. Additionally, the SATA-3Gbps interface provides a high-speed data transfer rate of up to 3 gigabits per second (Gbps).
This hard drive is designed to be reliable and durable, with a mean time between failures (MTBF) of up to 1.2 million hours. It also has built-in error correction capabilities to help ensure data integrity and prevent data loss.
In summary, the large storage capacity of the MB2000EBUCF HPE hard drive makes it an ideal choice for high-capacity storage applications, where performance and reliability are critical factors.
Storage Capacity and Scalability
The MB2000EBUCF HPE hard drive has a storage capacity of 2 terabytes (TB), which is equivalent to 2,000 gigabytes (GB). This is a significant amount of storage capacity that can be used to store large amounts of data such as documents, images, videos, and other digital files.
In terms of scalability, the MB2000EBUCF HPE hard drive is a midline drive, which means it is designed for mid-range storage solutions that require high-capacity storage at an affordable price. It is a non-hot-swap drive, which means it must be physically installed into a server or storage system and cannot be easily replaced or removed while the system is in operation.
However, the MB2000EBUCF HPE hard drive can be combined with other hard drives in a server or storage system to increase the overall storage capacity of the system. This can be achieved through various methods such as RAID (redundant array of independent disks) or JBOD (just a bunch of disks) configurations.
RAID configurations involve grouping multiple hard drives together to create a single logical volume with improved performance and redundancy. This can be done with the MB2000EBUCF HPE hard drive and other compatible drives to create a larger storage pool.
JBOD configurations, on the other hand, involve connecting multiple hard drives together to create a single large volume without any redundancy or performance benefits. This can also be done with the MB2000EBUCF HPE hard drive and other compatible drives to create a larger storage pool.
Energy Efficiency
The MB2000EBUCF HPE Hard Drive has been designed to be energy efficient, which is a key consideration for servers that need to operate 24/7 while keeping power consumption low.
One of the ways this hard drive achieves energy efficiency is by having a low power consumption during operation. The drive uses a 7.2K RPM spindle speed which enables it to read and write data efficiently while consuming less power compared to faster spinning drives. Additionally, it uses the SATA-3GBPS interface which also has a lower power consumption compared to other interfaces.
Another way the MB2000EBUCF HPE Hard Drive is energy efficient is by having a thermal design that minimizes heat generation. This hard drive has a non-hot swap midline design which means it doesn’t generate as much heat as a hot-swappable drive, reducing the need for additional cooling in the server. The lower heat generation also contributes to the overall power savings of the server.
The MB2000EBUCF HPE Hard Drive achieves energy efficiency by using a low-power spindle speed, a low-power interface, and a thermal design that minimizes heat generation. These features allow servers to operate with minimal power consumption, resulting in cost savings and a reduced carbon footprint.
General Information
- Brand: HPE
- MPN: MB2000EBUCF
- Option Part Number: 507774-B21
- Spare Part Number: 508041-001
- Model Number: MB2000EBUCF
- Assembly Number: 638516-001
Technical information
- Device Type: Hard Drive -Internal
- Capacity: 2 TB
- Interface: SATA-3Gbps
- Form Factor: 3.5 inch LFF
- Spindle Speed: 7200 RPM
- External Data Transfer Rate: 300 MBps
- Carrier Type: Standard Carrier
- Enclosure: Non Hot Swap
- Bundled With: HPE Standard Carrier
Performance
- Drive Transfer Rate: 300 MBps (external)
- Spindle Speed: 7200 RPM
Expansion & Connectivity
- Interfaces: 1 x SATA 3 Gb/s
- Compatible Bays: 3.5inch
Product Dimensions & Weight
- Height: 2.60 cm
- Width: 11.10 cm
- Depth: 18.40 cm
- Weight: 1.40 kg
Compatibility
- HPE ProLiant DL Series: DL120 Gen5 (3.5inch), DL120 Gen6 (3.5inch), DL120 Gen6 Base (3.5inch), DL120 Gen6 Entry (3.5inch), DL160 Gen6 (3.5inch), DL160 Gen6 Special Server (3.5inch), DL160se Gen6 (3.5inch), DL165 Gen6 (3.5inch), DL165 Gen7 (3.5inch), DL165 Gen7 Base (3.5inch), DL165 Gen7 Entry (3.5inch), DL165 Gen7 Special Server (3.5inch), MicroServer (3.5inch)
- HPE ProLiant ML Series: ML10 Entry (3.5inch), ML110 Gen5 (3.5inch), ML110 Gen6 (3.5inch), ML110 Gen6 Base (3.5inch), ML110 Gen6 Entry (3.5inch), ML110 Gen6 Performance (3.5inch), ML110 Gen6 Special Server (3.5inch), ML110 Gen7 (3.5inch), ML110 Gen7 Base (3.5inch), ML110 Gen7 Entry (3.5inch), ML115 Gen5 (3.5inch), ML150 Gen6 (3.5inch), ML150 Gen6 Entry (3.5inch), ML330 Gen6 (3.5inch), ML330 Gen6 Entry (3.5inch)
