Description
Overview of HPE 32GB 2933Mhz RAM
The HPE 32GB 2933MHz PC4-23400 DDR4 SDRAM Ecc Registered Ram is a type of computer memory that is designed to provide high-performance and reliability in servers and other high-performance computing systems. This RAM is characterized by its large capacity of 32GB, its fast speed of 2933MHz, and its advanced error correction capabilities. The PC4-23400 refers to the memory’s data transfer rate, which is 23,400MB/s, this is a measure of the memory’s performance and it’s faster than the standard DDR4. The RAM is of DDR4 type, DDR4 is the latest version of the SDRAM (Synchronous Dynamic Random Access Memory) and it is ECC (Error Correction Code) registered, this means it has built-in error detection and correction capabilities to ensure data integrity. Overall, the HPE 32GB 2933MHz PC4-23400 DDR4 SDRAM Ecc Registered Ram is a high-performance memory solution that is well-suited for use in demanding computing environments where data integrity and reliability are of paramount importance, such as data centers, enterprise environments, heavy-duty workstations, and high-performance gaming systems.
Error Correction Capabilities
The Error Correction Capabilities of HPE 32GB 2933MHz PC4-23400 DDR4 SDRAM Ecc Registered Ram refers to the built-in error detection and correction features that are designed to ensure the integrity and accuracy of data stored in the memory. ECC (Error Correction Code) is a method of detecting and correcting errors that may occur in the memory during data transfer or storage.
ECC memory uses extra memory bits to store error-correcting code, this allows the memory controller to detect and correct single-bit errors in data, this improves the reliability of the memory and reduces the chances of data corruption. The Ecc Registered Ram refers that the memory is registered, which means that it has a register that delays the data signals to the memory controller, this allows the memory controller to process the data in a more orderly fashion, reducing the chances of errors.
Installation and Setup Guide
The installation and setup guide for the HPE 32GB 2933MHz PC4-23400 DDR4 SDRAM Ecc Registered Ram will vary depending on the specific server or system in which it is being installed. However, in general, the installation process for this type of RAM involves the following steps:
- Turn off the power to the server or system and disconnect all cables.
- Open the system and locate the memory slots.
- Carefully remove any existing RAM modules from the system, if necessary.
- Locate the notch on the bottom edge of the RAM module, align it with the corresponding notch in the memory slot, and then gently press the module into place.
- Repeat the process for any additional RAM modules being installed.
- Close the system and reconnect all cables.
- Turn on the power to the server or system and check the system’s BIOS or UEFI firmware settings to ensure that the new RAM is recognized and properly configured.
It is important to follow the system’s manual and the guidelines of the manufacturer when installing the RAM, and to use anti-static precautions when handling the RAM.
General Information
- Brand: HPE
- Manufacturer Part Number: P00924-K21
- Type: Memory (RAM)
- Sub-Type: PC4-23400
- Product Name:HPE 32GB 1X32GB Dual Rank X4 DDR4-2933 Cas-21-21-21 Registered Smart Memory Kit
- Product Type: Ram Module
Technical Information
- Storage Capacity: 32GB
- Memory Type: DDR4 SDRAM – Dimm 288-Pin
- Number Of Modules: 1 X 32GB
- Memory Speed: 2933MHZ (Pc4-23400)
- Features: Dual Rank X4, Registered
- Error Checking: Ecc
- Voltage: 1.2 V
- Latency Timings: Cl21 (21-21-21)
- Upgrade Type: System Specific
Compatibility Information
- HPE Proliant Bl460c Blade Servers
- HPE Proliant Xl230k Servers
- HPE Proliant Dl360/dl380 Servers
- HPE Proliant Ml350 Servers
- HPE Synergy 480 Compute Modules
- HPE Proliant Dl560/dl580 Servers
- HPE Synergy 660 Compute Modules
- HPE Proliant Apollo 2000 Xl170r/xl190r/apollo 4200/apollo 4500 Xl450/apollo 6500 Servers
