P05928-K21 HPE 480GB 2.5inch SFF DS SATA 6GBPS SC Read Refurbished

The design and form factor of the P05928-K21 HPE 480GB SSD refers to its physical dimensions, shape, and internal structure.

The P05928-K21 HPE 480GB SSD has a form factor of 2.5 inches, which is a standard size for laptop and server hard drives. This means that it is designed to fit into the drive bays of devices that support 2.5-inch drives, making it a suitable replacement for traditional spinning hard disk drives.

The drive also has a Small Form Factor (SFF), which means that it is more compact than other standard 2.5-inch drives. This makes it an ideal choice for servers, where space is at a premium.

The P05928-K21 HPE 480GB SSD is a Double-Sided (DS) drive, which means that it has NAND flash chips on both sides of the circuit board. This increases the storage capacity of the drive without increasing its physical size.

The drive uses the Serial ATA (SATA) interface, which is a standard interface for connecting storage devices to a computer. It supports SATA 6Gbps (also known as SATA III), which means that it can transfer data at a maximum rate of 6 gigabits per second, making it faster than older SATA interfaces.

Installation and compatibility are important considerations when purchasing and using the P05928-K21 HPE 480GB 2.5inch SFF DS SATA 6GBPS SC Read Intensive SSD solid state drive. Here is a closer look at these two aspects:

Installation: The P05928-K21 HPE 480GB SSD is designed to be installed in a 2.5-inch drive bay, which is a common size for laptops and some desktops. It is a hot-swappable drive, which means that it can be inserted or removed from the system while it is running. The installation process for the drive is relatively simple, and it is similar to installing a standard hard drive. The drive can be connected to the system using the SATA interface and secured in place with screws.

Compatibility: The P05928-K21 HPE 480GB SSD is compatible with a wide range of systems, including desktops, laptops, and servers. However, it is important to check the compatibility of the drive with your specific system before making a purchase. The drive supports the SATA 6Gbps interface, which is backward compatible with older SATA interfaces, but it may not be compatible with other types of interfaces such as SAS. The drive is also compatible with a variety of operating systems, including Windows, Linux, and MacOS.

In addition to the above, it is important to note that the P05928-K21 HPE 480GB SSD may require specific drivers or firmware updates to function properly with certain systems. It is recommended to check the manufacturer's website or documentation for more information on installation and compatibility.

Reliability and endurance are important factors to consider when evaluating the performance and suitability of a solid state drive (SSD) like the P05928-K21 HPE 480GB SSD. Here's an explanation of what these terms mean in the context of this specific SSD:

Reliability: Reliability refers to the ability of the SSD to perform consistently and predictably over time. A reliable SSD should have a low failure rate and be able to operate without errors or data loss over its expected lifespan. The P05928-K21 HPE 480GB SSD is designed for read-intensive workloads and is optimized for reliability, thanks to its advanced error correction and detection algorithms. This SSD also has a Mean Time Between Failures (MTBF) rating of 2 million hours, which is a good indication of its reliability.

Endurance: Endurance refers to the SSD's ability to withstand a high number of write cycles over its lifespan without experiencing performance degradation or failure. The P05928-K21 HPE 480GB SSD is designed for read-intensive workloads and has a high endurance rating of up to 0.8 drive writes per day (DWPD) for five years, which means it can withstand a significant amount of data writes and still maintain consistent performance. This SSD also features wear-leveling and over-provisioning technologies that help to extend its lifespan and maintain its performance over time.

• Manufacturer : HPE
  
• MPN : P05928-K21
• Spare Part Number: P08567-001
• Type : Solid State Drive (SSD)
• SSD Type : SATA 6GBPS
• SKU: P05928-K21

• Capacity: 480GB
  
• Form Factor: 2.5inch SFF
• Interface: SATA 6GBPS
• NAND Flash Memory Type: Triple-level cell (TLC)
• Plug Type: Hot Pluggable
• Connectivity Type: Single
• Carrier Type: Smart Carrier (SC)
• Workload Type: Read Intensive
• Bundled with: HPE SmartDrive Carrier (SC)
• Features: Digitally Signed Firmware (DS)
• Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
• Height: 7.00 mm(0.30 inch)

• Lifetime Writes (TB): 1200
  
• Endurance DWPD (Drive Writes Per Day): 1.30
• Drive Transfer Rate: 6 GBPS (external)
• MAX Seq. Reads Throughput (MiB/s): 530
• MAX Seq. Writes Throughput (MiB/s): 465
• Random Read Average Latency uSec (4KiB,Q1): 110
• Random Write Average Latency uSec (4KiB,Q1): 75
• Random Read IOPS (4KiB, Q=16): 68000
• Random Write IOPS (4KiB, Q=16): 17500
• MAX Random Read IOPS (4KiB): 76000@Q32
• MAX Random Write IOPS (4KiB): 19000@Q4

• Idle Time: 1.27 Watt
  
• Random Read: 2.92 Watt
• Random Write: 2.92 Watt
• Sequential Read: 2.26 Watt
• Sequential Write: 3.15 Watt
• Random Read/Write: 2.92 Watt
• MAX: 4.00 Watt

• Height: 0.63 Inch
  
• Width: 3.10 Inch
• Depth: 5.45 Inch
• Weight: 1.50 Lbs

• HPE Apollo Series: 4200 Gen9 for Google (2.5 inch)
• HPE ProLiant DL Series: DL180 Gen10 (2.5 inch), DL180 Gen10 Entry (2.5 inch), DL180 Gen10 SMB (2.5 inch), DL325 Gen10 (2.5 inch), DL325 Gen10 Base (2.5 inch), DL325 Gen10 Entry (2.5 inch), DL325 Gen10 Performance (2.5 inch), DL325 Gen10 Plus (2.5 inch), DL325 Gen10 SMB Solution (2.5 inch), DL325 Gen10 Solution (2.5 inch), DL360 Gen9 (2.5 inch), DL360 Gen9 Base (2.5 inch), DL360 Gen9 CMS (2.5 inch), DL360 Gen9 Entry (2.5 inch), DL360 Gen9 Performance (2.5 inch), DL360 Gen9 Special Server (2.5 inch), DL380 Gen10 (2.5 inch), DL380 Gen10 All Flash Server for Datera (2.5 inch),
• DL380 Gen10 Base (2.5 inch), DL380 Gen10 Entry (2.5 inch), DL380 Gen10 Entry SMB (2.5 inch), DL380 Gen10 for Cohesity DataPlatform (2.5 inch), DL380 Gen10 High Performance (2.5 inch), DL380 Gen10 Hybrid Server for Datera (2.5 inch), DL380 Gen10 Network Choice (2.5 inch), DL380 Gen10 Network Choice for CTERA (2.5 inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5 inch), DL380 Gen10 Performance (2.5 inch), DL380 Gen10 Server for CTERA (2.5 inch), DL380 Gen10 SMB (2.5 inch), DL380 Gen10 SMB Networking Choice (2.5 inch), DL380 Gen10 Solution (2.5 inch), DL388 Gen10 (2.5 inch)