Description
Installation of the Controller
To install the P06367-B21 HPE Megaraid Mr416i-p 12GBPS PCI-E 4.0 X16 SAS Controller, follow these steps:
- Turn off the server and unplug it from the power source.
- Locate an available PCI-E 4.0 x16 slot on the motherboard.
- Remove the bracket from the back of the controller.
- Carefully insert the controller into the PCI-E slot, making sure it is seated firmly.
- Screw the bracket onto the back of the controller and secure it to the chassis.
- Connect the SAS cables to the controller, making sure they are properly seated.
- Connect the power cable to the controller.
- Turn on the server and verify that the controller is detected by the system BIOS.
After installation, you may need to install drivers and management software to fully utilize the capabilities of the controller. You can download the latest drivers and software from the HPE website. It is also recommended to update the firmware of the controller to ensure it is running the latest version for optimal performance and security.
Supported Operating Systems
The P06367-B21 HPE Megaraid Mr416i-p 12GBPS PCI-E 4.0 X16 SAS Controller supports the following operating systems:
- Microsoft Windows Server 2016, 2019
- Red Hat Enterprise Linux 7.5, 7.6, 7.7, 7.8, 8.0, 8.1, 8.2
- SUSE Linux Enterprise Server 12 SP4, 15 SP1, 15 SP2
- VMware vSphere 6.5, 6.7, 7.0
It is important to note that this list may change over time and it is always recommended to check for the latest compatibility information on the HPE website or consult with an HPE representative. Additionally, the specific version of the operating system may also have specific requirements for driver versions and firmware, so it is important to ensure that the correct drivers and firmware are installed.
Compatibility with HPE Servers and Storage Systems
The P06367-B21 HPE MegaRAID MR416i-p 12Gbps PCI-E 4.0 x16 SAS Controller is compatible with the following HPE ProLiant Gen10 servers:
- HPE ProLiant DL360 Gen10 Server
- HPE ProLiant DL380 Gen10 Server
- HPE ProLiant DL560 Gen10 Server
- HPE ProLiant ML350 Gen10 Server
It supports up to 16 SAS/SATA hard disk drives or solid-state drives and supports RAID levels 0, 1, 5, 6, 10, 50, and 60. It also supports up to 4GB DDR4 cache memory for increased performance.
It is important to note that the P06367-B21 HPE MegaRAID MR416i-p SAS Controller is designed for use specifically with HPE ProLiant Gen10 servers and is not compatible with other brands or models of servers. Additionally, the controller requires a PCIe 4.0 x16 slot for installation, so it is important to ensure that your server has the necessary slot available.
General Information about this HPE P06367-B21
- Manufacturer: HPE
- Part Number or SKU# P06367-B21
- Product Type : Controller
- Product Name : PCI-E
Technical Information of PCI-E Controller Card
- Interface: SAS Controller
- Device Type : Storage Controller (raid)
- Bus Type : Pci Express 4.0 X16
- Raid Level : Raid 0, 1, 5, 6, 10, 50, 60
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.
