The AW537A is a Small Form-factor Pluggable (SFP) transceiver module manufactured by Hewlett-Packard Enterprise (HPE). It supports data rates of 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet standards and is designed for use with HPE switches and routers that have SFP slots.
Installation: To install the AW537A HPE SFP transceiver module, follow these steps:
- Power off the switch or router where the SFP slot is located.
- Remove the SFP slot cover if present.
- Locate the SFP slot on the switch or router.
- Remove the protective cap from the AW537A SFP module.
- Insert the AW537A SFP module into the SFP slot until it clicks into place.
- Replace the SFP slot cover if necessary.
- Power on the switch or router.
Configuration: Once the AW537A SFP transceiver module is installed, you may need to configure it. The following steps outline the basic configuration process:
- Access the switch or router CLI (command-line interface) or web interface.
- Navigate to the interface configuration menu.
- Locate the interface that corresponds to the SFP slot where the AW537A module is installed.
- Configure the interface for the desired speed and duplex settings.
- Save the configuration and exit the interface configuration menu.
It is important to note that some HPE switches and routers may require additional configuration steps beyond the basic process outlined above. Therefore, it is recommended to consult the product documentation or seek assistance from a qualified network administrator if necessary.
The AW537A HPE SFP (Mini-GBIC) Transceiver Module is a small form-factor pluggable (SFP) transceiver that is used in networking equipment to provide connectivity between devices. The transceiver supports data transfer rates of 10base-T, 100base-Tx, and 1000base-T, which means it can operate on different Ethernet network speeds.
The transceiver module can be plugged into a compatible SFP slot on a networking device, such as a switch, router, or hub. Once installed, the transceiver module communicates with the device's operating system to provide connectivity to the network.
The AW537A HPE SFP Transceiver Module is designed to work in a variety of operating systems and environments. It supports different types of Ethernet media, including copper twisted-pair cables, and can operate in both half-duplex and full-duplex modes.
The transceiver module is also designed to operate in a range of temperatures and environments, making it suitable for use in a variety of settings. It is hot-swappable, which means it can be installed or removed from a device without interrupting network operations.
Management and Monitoring CapabilitiesThe AW537A HPE SFP (Mini-GBIC) Transceiver Module is a networking module designed to provide connectivity between network devices. This module is compatible with various HPE networking devices and can be plugged into the SFP port to provide network connectivity.
The AW537A module supports three different Ethernet speeds: 10BASE-T, 100BASE-TX, and 1000BASE-T. This makes it a versatile module that can be used in a variety of network environments. The module is capable of auto-negotiating the speed with the connected device, which ensures optimal performance and compatibility.
In addition to its speed capabilities, the AW537A module also has management and monitoring capabilities. It can be managed and monitored through the HPE networking device it is plugged into, which allows for easy configuration and troubleshooting. This module can also be monitored for performance metrics, such as link status and traffic statistics, which can help network administrators identify and resolve issues.
General Information- Device Type : Sfp (Mini-Gbic) Transceiver Module
- Enclosure Type : Plug-In Module
- Connectivity Technology : Wired
- Cabling Type : 10base-T, 100base-Tx, 1000base-T
- Data Link Protocol : Ethernet, Fast Ethernet, Gigabit Ethernet
- Data Transfer Rate : 1 Gbps
Expansion / Connectivity
- Compatible Slots : 1 X Sfp (Mini-Gbic)
About Refurbished Products
Warranty
ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.
What does ALLHDD.Com warranty cover?
30-days to 3 years warranty:
Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product(s)/model(s), we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item(s) will process for replacement or refund.
What is not covered by our warranty?
The reason why our warranty does not cover any problem caused by the following conditions:
(a) misuse of hardware; accidental damage; carelessness product(s) damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;
(b) any misuse outside the instructions in the user manual for any specific product;
(c) damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.
What is the Manufacturer/Brand Warranty?
In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase (2-5 years depending on the brand/manufacturer). It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply (i.e., Cisco, Juniper Networks).
For the server parts (i.e., Dell, HPE) to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those.
Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.
Important notes:
We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.
Individual product warranty mentioned on each item product description page/detail page.
Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.
Delivery
Shipping Options and Estimated Delivery Time
UPS Shipping Options:
FREE UPS® Ground (Free shipping to all orders for 48 states!)
Estimated delivery time: 4-7 business days
UPS 3 Day Select®
Estimated delivery time: 3 business days
UPS 2nd Day Air®
Estimated delivery time: 1-2 business days, Delivery by 10:30 AM or 2:00 PM
UPS Next Day Air® Standard Overnight
Estimated delivery time: Overnight 2-5 PM, Standard Overnight Delivery.
UPS Next Day Air® - Priority Overnight
Estimated delivery time: Overnight Delivery (Next Business Day) Delivery by 10:30 AM or 12:00 PM
UPS Next Day Air® First Overnight - Early A.M
Estimated delivery time: Overnight 8:00 AM, Early morning, overnight delivery for your time-critical shipments.
UPS® First Overnight - Saturday
Estimated delivery time: Overnight 8:30 AM – Saturday
FedEx Shipping Options:
FedEx Ground®
Estimated delivery time: (4–7 business days in the contiguous 48 states)
*For residential delivery via FedEx Ground use FedEx Home Delivery®
Estimated delivery time: 4−7 business days, based on the distance to the destination.
FedEx Express Saver®
Estimated delivery time: 3 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states (except Hawaii and Alaska)
FedEx 2Day®
Estimated delivery time: 2 business days (by 4:30 PM to U.S. businesses; by 8:00 PM to residences)
Available throughout all 50 states
FedEx Standard Overnight®
Estimated delivery time: Next-business-day (by 4:30 PM to U.S. businesses and by 8:00 PM to residences)
Available throughout all 50 states (Hawaii is outbound only)
FedEx Priority Overnight®
Estimated delivery time: Next-business-day (by 10:30 PM to U.S. businesses, noon to most residences)
Available throughout all 50 states
FedEx First Overnight®
Estimated delivery time: Next-business-day (by 8:30 or 9 AM to most areas)
Available throughout all 50 states
Worldwide Shipping Options:
UPS®/FedEx® International Economy
Estimated delivery time: 4-7 business days
UPS®/FedEx® International Priority
Estimated delivery time: 2-4 business days
UPS®/FedEx® Ground Shipping Canada
Estimated delivery time: 5-8 business days
Important notes:
- The processing of orders with Ground Shipping can take up to 24-48 hours. But we try to process all orders the same day.
- We are not responsible for weather problems that may affect the delivery of goods by carriers. We cannot guarantee the exact delivery time, regardless of the carriers' claims.
- If you have any specific delivery time requirements, please contact our customer support and someone from our customer service team will be able to help you.
- You can estimate the shipping cost from the products detail page, also available on the checkout page
- The shipping cost depends on box dimensions, weight, and zip/postal code
- To get a FedEx® delivery service you need to mention it on the checkout page notebox.
- For urgent shipments, please contact our customer service.
- Shipping cut off 4:00 PM (Monday-Friday) and available blind drop shipment.
