CAB-SS-449FC Cisco RS 449 Smart Serial 10 Feet Network Cable | Refurbished

Description

Features and specifications

Configuration and management

The CAB-SS-449FC is a Cisco Smart Serial cable that connects devices with RS-449 interfaces. This cable has a length of 10 feet and is used for network connectivity. Configuration and management of the CAB-SS-449FC cable can be done by following the steps below:

• Ensure that the cable is compatible with your devices. Check the device manuals or contact the manufacturer to confirm compatibility.
• Connect one end of the cable to the RS-449 interface on one device and the other end to the RS-449 interface on the other device.
• Configure the devices for communication using the cable. This may involve configuring the baud rate, parity, data bits, and stop bits to match the settings on the other device.
• Verify that the devices are communicating by checking for connectivity and testing the connection.
• If there are any issues with the connection, troubleshoot the cable and devices to identify and resolve the problem.

To manage the cable, ensure that it is properly stored and protected when not in use. Avoid bending or twisting the cable excessively as this can damage the wiring inside. Regularly inspect the cable for signs of wear or damage and replace it if necessary.

Troubleshooting common issues

The Cisco RS 449 Smart Serial cable, also known as CAB-SS-449FC, is a type of network cable that is commonly used to connect networking devices such as routers, switches, and firewalls. Like any other network cable, it can experience a range of issues that can prevent it from functioning properly. Here are some common issues that you may encounter when using a CAB-SS-449FC cable and some troubleshooting tips:

• Connection issues: The cable may fail to establish a connection between the devices, which could be due to a loose or damaged connector. Ensure that both ends of the cable are securely plugged in, and try using another cable to test the connection.
• Signal loss: If the cable is too long or there are too many connectors in the cable run, signal loss can occur, which can result in poor network performance. Use a shorter cable or a cable with fewer connectors to minimize signal loss.
• Compatibility issues: Not all devices are compatible with RS-449 connectors, which could result in connection issues. Check the device specifications to ensure that it supports RS-449 connectors before using this cable.
• Cable damage: The cable may be damaged due to wear and tear or improper handling. Check for any visible signs of damage such as kinks, cuts, or frayed wires. If there is any damage, replace the cable.
• Incorrect pinout: RS-449 cables have a specific pinout that must be followed, or the cable will not function properly. Double-check the pinout configuration to ensure that it matches the device’s specifications.
• Power issues: Some devices may require external power to operate properly. Check if the device requires power and ensure that it is connected to a power source.

General Information

• Manufacturer: Cisco Systems, Inc
• Manufacturer Part Number: CAB-SS-449FC
• Brand Name: Cisco
• Product Name: Smart Serial Cable
• Product Type: Network Cable

Technical Information

• Cable Length: 10 ft
• Connector on First End: 1 x 26-pin HD-26 Male RS-449 Serial
• Connector on Second End: 1 x DB-37 Female RS-449 Serial
• Conductor: Copper

Miscellaneous

• Compatibility-Cisco 4-port serial shared port adapter
• Cisco WAN interface cards
• WIC-2T
• WIC-2A/S