Description
Installation and Configuration
The ASR5K-FANT-UP fan tray is a component used to provide cooling for the Cisco ASR5000 series router. To install and configure this fan tray, you will need to follow these steps:
- Verify compatibility: Check that the fan tray is compatible with your ASR5000 series router and the software version you are running.
- Power off the router: Disconnect all cables and connections from the router and power it off.
- Install the fan tray: Open the router’s chassis and locate the fan tray compartment. Remove any existing fan tray and replace it with the ASR5K-FANT-UP fan tray. Connect the fan tray to the backplane of the router and secure it with screws.
- Power on the router: Power on the router and verify that the fan tray is operating properly. Check the status LED on the fan tray and monitor the system’s temperature and fan speed.
- Configure fan speed and temperature: Configure the fan speed and temperature thresholds to meet your network’s specific requirements. You can use the Cisco IOS CLI or the web-based interface to configure these settings.
Cooling Performance
The cooling performance of the ASR5K-FANT-UP fan tray depends on several factors, including the environment in which the router is operating, the temperature and fan speed thresholds set, and the overall power consumption of the router.
The ASR5K-FANT-UP fan tray is designed to provide efficient cooling for the Cisco ASR5000 series router and maintain the internal temperature within safe operating limits. The fan tray operates automatically, adjusting fan speed based on the temperature inside the router and the temperature thresholds set in the configuration.
By providing efficient cooling, the ASR5K-FANT-UP fan tray helps to ensure stable operation of the router and prevent potential issues caused by overheating. To maintain optimal cooling performance, it is important to periodically check the temperature and fan speed and adjust the temperature thresholds if necessary.
Efficient Maintenance and Support
Efficient maintenance and support of the ASR5K-FANT-UP fan tray is important to ensure its reliability and longevity in providing cooling for the Cisco ASR5000 series router. Here are some best practices for maintenance and support:
- Regular inspections: Regularly inspect the fan tray for physical damage or signs of wear and tear, and check for proper air flow. Clean the fan blades as necessary.
- Software updates: Keep the router and fan tray software up to date to ensure optimal performance and address any potential security vulnerabilities.
- Temperature monitoring: Continuously monitor the temperature inside the router and adjust the temperature thresholds as needed to ensure proper cooling.
- Power management: Implement good power management practices to reduce power consumption and prevent overheating, such as using power-saving modes and reducing the number of active components.
- Proper storage: If the fan tray is not in use, store it in a cool and dry place to prevent physical damage and reduce the risk of corrosion.
General Information
- Manufacturer: Cisco
- MPN: ASR5K-FANT-UP
- Product Name: ASR 5000 Spare Accessory Upper Fan Tray
- Product Model:ASR 5000
- Product Type: Fan Unit
- Environmentally Friendly: Yes





