Description
Design and Construction
The CAB-STACK-3M is a Cisco 3 meter Stackwise networking cable that is designed to connect up to nine Cisco Catalyst 3750 series switches in a stack. The Stackwise technology enables the switches to be managed as a single entity, providing benefits such as simplified management, increased bandwidth, and redundancy.
Design: The CAB-STACK-3M cable is a high-quality, copper-based cable with a blue PVC jacket. The cable consists of four pairs of twisted copper wires, which are shielded to reduce electromagnetic interference. The cable is terminated with Cisco proprietary StackWise connectors on each end, which have locking mechanisms to ensure a secure connection.
Construction: The construction of the CAB-STACK-3M cable is designed to ensure high-performance and reliability. The four pairs of twisted copper wires are tightly wound to reduce crosstalk and signal loss. The cable is shielded with a layer of foil and a braided shield to minimize electromagnetic interference. The connectors are molded onto the cable, which provides strain relief to prevent damage to the cable and ensure a long service life.
Installation: To install the CAB-STACK-3M cable, simply connect one end of the cable to the StackWise connector on one switch and the other end to the StackWise connector on the second switch. The cable is designed to be hot-swappable, meaning that it can be connected or disconnected without powering down the switches.
Differences Between
The CAB-STACK-3M cable is a Cisco 3 meter Stackwise networking cable designed to connect up to nine Cisco Catalyst 3750 series switches in a stack. There are several differences between the CAB-STACK-3M and other Stackwise cables, including:
- Length: The CAB-STACK-3M cable is 3 meters in length, while other Stackwise cables come in different lengths, such as 0.5, 1, and 5 meters. The length of the cable can affect the distance between switches and the overall configuration of the stack.
- Connector type: The CAB-STACK-3M cable has Cisco proprietary StackWise connectors on each end, while other Stackwise cables may have different types of connectors, such as SFP+ connectors. The connector type can affect the compatibility of the cable with different switch models.
- Cable type: The CAB-STACK-3M cable is a copper-based cable with a blue PVC jacket, while other Stackwise cables may be made of different materials or have different jacket colors. The cable type can affect the signal quality and durability of the cable.
- Compatibility: The CAB-STACK-3M cable is designed specifically for use with Cisco Catalyst 3750 series switches, while other Stackwise cables may be compatible with different switch models or vendors. Compatibility can affect the performance and functionality of the stack.
Troubleshooting Common Issues
CAB-STACK-3M is a Cisco Stackwise networking cable that is commonly used to interconnect multiple Cisco switches and create a single logical unit. While this cable is typically reliable, there are a few common issues that can arise. Here are some troubleshooting steps to help you address these issues:
- Verify that the cable is securely plugged in: One of the most common issues with any networking cable is that it is not properly plugged in. Make sure that both ends of the CAB-STACK-3M cable are securely plugged into their respective switches.
- Check for damage to the cable: Check the cable for any physical damage, such as cuts, kinks, or bent connectors. Any damage to the cable can cause intermittent connectivity issues or complete failure.
- Ensure that the cable is not stretched: CAB-STACK-3M cables are relatively short, and stretching them can cause connectivity issues. Make sure that the cable is not stretched or bent beyond its capacity.
- Verify that the cable is not twisted: Twisting the cable can also cause connectivity issues. Make sure that the cable is not twisted or wrapped around other cables.
- Verify that the switches are compatible: CAB-STACK-3M cables are designed to be used with specific Cisco switches. Verify that the switches you are connecting are compatible with the CAB-STACK-3M cable.
- Check the switch configurations: Check the switch configurations to ensure that the stackwise ports are configured correctly. Incorrect configurations can cause connectivity issues.
- Check for software issues: Sometimes software issues can cause connectivity issues. Check the software versions on each switch to ensure that they are up to date.
General Information
- Manufacturer Cisco Systems, Inc
- MPN: CAB-STACK-3M
- Product Name Stacking Cable
- Product Type Data Transfer Cable
- SKU: CAB-STACK-3M
Technical Information
- Cable Characteristic Stacking Cable
- Cable Length 9.84 Ft
- Device Supported Switch
Dimensions & Weight
- Weight (Approximate) 1 Lbs
Miscellaneous
- Compatibility Cisco Catalyst Series Switches-
- 3750X-12
- 3750X-24
- 3750X-48
