Description
Key Features and Benefits
The CP-7937-PWR-SPL= Cisco Power Splitter is a device used to divide the power supplied to a Cisco 7937 Conference Phone into two separate outputs, allowing the phone to be powered from two separate power sources. Key features and benefits of CP-7937-PWR-SPL= include:
- Dual Power Supply: The power splitter enables the Cisco 7937 Conference Phone to be powered from two separate power sources, providing increased reliability and redundancy in case of power failure.
- Easy Installation: The CP-7937-PWR-SPL= is easy to install and does not require any special tools or technical knowledge.
- Compatible with Cisco 7937: The power splitter is specifically designed for use with the Cisco 7937 Conference Phone and is fully compatible with the phone’s power requirements.
- Increased Flexibility: With the ability to split power from two separate sources, the CP-7937-PWR-SPL= provides increased flexibility for power management and cable routing in conference rooms.
- Cost-Effective Solution: By utilizing a single conference phone and splitting the power supply, the CP-7937-PWR-SPL= provides a cost-effective solution for conference room power management.
Power Supply Requirements
The CP-7937-PWR-SPL= Cisco Power Splitter requires a power supply that provides 48V DC nominal voltage, with a voltage range of 36-57V DC. The power supply must be able to deliver a minimum of 400 mA current to support the operation of the Cisco 7937 Conference Phone and the CP-7937-PWR-SPL=. It is important to ensure that the power supply is able to meet these requirements, as using a power supply that does not meet these specifications may cause damage to the device and affect its performance.
Configuration and Management
The CP-7937-PWR-SPL= Cisco Power Splitter for 7937 is a passive device that does not require any configuration or management. The power splitter simply splits the power from a single power supply to two separate power outlets, allowing the Cisco 7937 Conference Phone to be powered from two different power sources.
To use the CP-7937-PWR-SPL=, simply connect the power supply to one of the two power outlets on the splitter, and then connect the conference phone to the other outlet. There are no settings to adjust or software to install, making it a plug-and-play device.
It’s important to note that the CP-7937-PWR-SPL= does not provide any management or monitoring functionality for the conference phone, it is simply a power distribution device. For any configuration or management of the conference phone itself, refer to the relevant documentation or the Cisco support team.
General Information about this Cisco CP-7937-PWR-SPL=
- Cisco CP-7937-PWR-SPL= Power Splitter For 7937
- Manufacturer : Cisco
- Model Number or SKU# CP-7937-PWR-SPL=
- Product Name Power over Ethernet Splitter
- Product Type PoE Splitter
Technical Information of Cisco Power over Ethernet Splitter
- Device Supported: Conference Platform
Miscellaneous
- Compatibility Cisco Unified IP Conference Station 7937G
