Description
Optimizing Network Connectivity of Fabric 3 Switching Module
The DS-13SLT-FAB3 Cisco MDS Crossbar Fabric3 Switching Module is a high-performance module that is designed to optimize network connectivity in a Cisco MDS storage area network (SAN). The module is a key component of the Cisco MDS 9000 Family of storage networking solutions and provides a scalable and reliable way to connect multiple SAN fabrics together.
The module is based on the Crossbar Fabric3 technology, which allows it to provide high-speed connectivity between multiple SAN fabrics. The module can support up to 13 active ports and can be configured in a variety of topologies, including full-mesh, partial-mesh, and point-to-point configurations.
The module also has a number of features that help to optimize network connectivity, including:
- Quality of Service (QoS) – The module supports QoS, which allows for the prioritization of different types of traffic, such as Fibre Channel and Fibre Channel over IP (FCIP). This helps to ensure that important traffic is given priority over less important traffic, which can help to improve overall network performance.
- Link Aggregation Control Protocol (LACP) – The module supports LACP, which allows for the aggregation of multiple physical links into a single logical link. This can help to improve network reliability and availability by providing redundancy in case of a link failure.
- Fibre Channel Routing – The module supports Fibre Channel routing, which allows for the creation of multiple SAN fabrics that can be connected together. This can help to improve scalability and manageability by allowing for the creation of smaller, more manageable SAN fabrics.
Revolutionizing Network Operations of Crossbar Switch
The DS-13SLT-FAB3 Cisco MDS Crossbar Fabric3 Switching Module is a revolutionary network operations module that is designed to provide high-speed, low-latency switching for data center and storage area network (SAN) environments. The module utilizes the Crossbar Fabric3 technology, which is a high-performance, low-latency switching fabric that is capable of delivering data rates of up to 16 Gbps per port.
One of the key features of the DS-13SLT-FAB3 is its ability to support many ports in a compact form factor. The module has a total of 13 ports, which can be configured as Fibre Channel or Fibre Channel over Ethernet (FCoE) ports. This allows for a high-density switching solution that can support a large number of servers, storage devices, and other network devices.
The DS-13SLT-FAB3 also supports advanced features such as Quality of Service (QoS) and congestion management, which allows for granular control over traffic flow and prioritization. This is particularly useful for data center environments where multiple applications and services are running on the same network.
Another major advantage of the DS-13SLT-FAB3 is its ability to support both Fibre Channel and FCoE protocols, which allows for a seamless integration with existing networks. This eliminates the need for separate Fibre Channel and Ethernet switches, which can help to simplify network operations and reduce costs.
Troubleshooting and Maintenance
The DS-13SLT-FAB3 Cisco MDS Crossbar Fabric3 Switching Module is a high-performance, low-latency switch module designed for use in Cisco MDS 9000 Series Multilayer Directors and Fabric Switches. It is used to provide high-speed, low-latency switching between different ports and modules within the Cisco MDS 9000 Series platform.
Troubleshooting:
- Verify that the module is properly installed and seated in the chassis.
- Check the status of the module using the show module command in the Cisco MDS 9000 Series switch.
- Check the status of the ports on the module using the show interface command in the Cisco MDS 9000 Series switch.
- Verify that the module’s firmware and software versions are compatible with the version of the Cisco MDS 9000 Series switch.
- Check the module’s event logs for any errors or alerts.
- If the module is not functioning properly, try removing and reinserting the module to see if that resolves the issue.
Maintenance:
- Keep the module clean and free of dust and debris to ensure proper airflow and cooling.
- Verify that the module’s firmware and software versions are up-to-date and compatible with the version of the Cisco MDS 9000 Series switch.
- Check the module’s event logs regularly for any errors or alerts.
- Perform regular backups of the module’s configuration to ensure data integrity and ease of recovery in case of a failure.
- Keep a spare module on hand in case of a failure or replacement needs.
It is important to note that the DS-13SLT-FAB3 Cisco MDS Crossbar Fabric3 Switching Module is a critical component of the Cisco MDS 9000 Series platform and proper troubleshooting and maintenance is essential to ensure optimal performance and availability. It is recommended to work with a Cisco-certified technician or consultant for any troubleshooting or maintenance needs.
General Information
- Manufacturer Cisco Systems, Inc
- Manufacturer Part Number DS-13SLT-FAB3
- Brand Name Cisco
- Product Name MDS 9513 Crossbar Switching Fabric3 Module, Spare
- Product Type Switch Fabric Module
Technical Information
- Application/Usage Switching Fabric
Miscellaneous
- Compatibility-
- Cisco MDS 9513 Multilayer Director