Description
Features and Benefits of NM-1HSSI Cisco Network Module
The NM-1HSSI is a single-port network module designed for use with Cisco 3640 and 3620 routers. It provides High-Speed Serial Interface (HSSI) connectivity, which allows for high-speed data transfer rates of up to 52 Mbps. Some of the key features and benefits of this network module include:
Features:
- High-speed data transfer rates of up to 52 Mbps.
- Single-port network module.
- Compatible with Cisco 3640 and 3620 routers.
- Supports High-Speed Serial Interface (HSSI) connectivity.
- Supports full-duplex operation for simultaneous transmission and reception of data.
- Supports a wide range of WAN protocols, including Frame Relay, PPP, and HDLC.
- Supports both synchronous and asynchronous data transfer modes.
- Provides a range of diagnostic and monitoring tools to help with troubleshooting.
Benefits:
- Enables high-speed data transfer, making it ideal for applications that require large amounts of data to be transferred quickly.
- Compatible with a range of Cisco routers, making it easy to integrate into existing network infrastructure.
- Supports a range of WAN protocols, providing flexibility and enabling it to be used in a wide range of applications.
- Supports both synchronous and asynchronous data transfer modes, providing further flexibility.
- Provides diagnostic and monitoring tools, making it easier to troubleshoot network issues and minimize downtime.
- Helps to improve network performance and reliability, ensuring that data is transferred quickly and efficiently.
- Helps to reduce costs by enabling high-speed data transfer over existing WAN connections, eliminating the need for expensive leased lines.
Network Management for NM-1HSSI Cisco 3640/3620 Single Port
The NM-1HSSI Cisco 3640/3620 Single Port Network Module is a high-speed serial interface (HSSI) module that provides a single HSSI port with a maximum data rate of 52 Mbps. Here are some network management tasks you can perform with this module:
- Configure the HSSI port: You can use the Cisco IOS command-line interface (CLI) to configure the HSSI port with various settings, such as data rate, framing type, and clock source. You can also set up loopback tests to verify the connectivity of the HSSI port.
- Monitor the HSSI port: You can use the show commands to monitor the status of the HSSI port, such as interface statistics, error counters, and hardware status. You can also use the debug commands to troubleshoot any issues with the HSSI port.
- Configure routing: You can use the HSSI port to establish a point-to-point connection between two routers or to connect to a WAN service provider. You can configure static or dynamic routing protocols, such as OSPF or BGP, to route traffic between networks.
- Implement security: You can use various security features, such as access control lists (ACLs), to restrict access to the HSSI port and to protect the network from unauthorized access or attacks.
- Perform firmware upgrades: You can upgrade the firmware of the NM-1HSSI module to fix bugs, add new features, or improve performance. You can use the Cisco IOS CLI or Cisco Network Assistant software to perform the upgrade.
Installation Requirements for NM-1HSSI Cisco
To install an NM-1HSSI network module on a Cisco 3640/3620 router, you will need the following:
- A Cisco 3640/3620 router with an available network module slot.
- An NM-1HSSI network module.
- A serial console cable.
- A power cord for the router.
- A Phillips-head screwdriver.
Here are the steps to install the NM-1HSSI network module:
- Turn off the router and unplug the power cord.
- Remove the cover of the router by loosening the screws on the back of the chassis.
- Locate the network module slot where you want to install the NM-1HSSI module.
- Remove the filler panel from the slot by loosening the screws on the panel.
- Hold the NM-1HSSI module by its edges and align the connector on the module with the slot on the router.
- Push the module firmly into the slot until it clicks into place.
- Use the screws provided with the NM-1HSSI module to secure it to the router chassis.
- Reattach the cover of the router and tighten the screws.
- Connect one end of the serial console cable to the console port on the router and the other end to a serial port on your computer.
- Plug in the power cord and turn on the router.
General Information
- Manufacturer: Cisco Systems, Inc
- Manufacturer Part Number: NM-1HSSI
- Brand Name: Cisco
- Product Name: 1-Port Network Module
- Product Type: Network Module
Technical Information
- Application/Usage Data Networking
- Interfaces/Ports:
- Interfaces/Ports Details 1 x 50-pin SCSI-2 HSSI WAN
- Media & Performance:
- Maximum Data Transfer Rate 52 Mbit/s
Miscellaneous
- Additional Information-
- Modular Router Solutions:
- LAN-to-LAN Routing
- Serial & Legacy Concentration
- VPN & Firewall Solutions
- Physical Limitation of Serial Modules per Chassis:
- Cisco 3640: 3
- Cisco 3620: 1
- Protocols Supported:
- Full Cisco IOS support by release 11.2 and 11.3
- Supported Features of Serial Network Modules:
- Synchronous
- Full Duplex
- Comments:
- No reliance on other network modules, WAN interface cards, voice interface cards, or advanced integration modules
Compatibility
- Supported Platforms & Minimum IOS Versions:
- 3745 – 12.2(8)T
- 3725 – 12.2(8)T
- 3660 series – 12.0(5)T
- 3640 – 11.3(3)T
- 3620 – 11.3(3)T
- 2691 – 12.2(8)T1
- 2650 – Not Available
- 2600XM Series – Not Available
- 2600 series – Not Available
- 1720 – Not Available
- 1600 series – Not Available
