Description
Power Output and Redundancy Capabilities
The power output and redundancy capabilities for the PIX-506-PWR-AC Cisco Redundant AC power supply for the PIX 506 firewall are as follows:
- Power output: 100-240 VAC, 50-60 Hz, 150 watts
- Redundancy capabilities: The PIX-506-PWR-AC is a redundant power supply, meaning that it can provide a backup power source in case of a failure or power outage of the primary power supply. This helps to ensure that the PIX 506 firewall continues to operate and provide network security even in the event of a power failure.
The PIX-506-PWR-AC power supply is designed to provide power to the PIX 506 firewall, it also has the capability of providing redundant power to the firewall. This redundancy feature ensures that the firewall will continue to operate in case of power failure to the primary power supply. It is also designed to work with a wide range of input voltage and frequency, making it suitable for use in different locations and with different types of electrical systems.
Installation and Setup Instructions
- Ensure that the power supply is compatible with your PIX 506 firewall.
- Disconnect all power from the firewall before installing the power supply.
- Remove the existing power supply from the firewall by releasing the tabs on the sides of the power supply and pulling it out of the chassis.
- Insert the new power supply into the chassis by aligning the tabs on the sides of the power supply with the slots in the chassis.
- Secure the power supply by pushing down on the tabs until they click into place.
- Connect the AC power cord to the power supply and plug it into a power outlet.
- Turn on the power to the firewall.
- Check the status of the power supply by logging into the firewall’s web-based configuration utility and navigating to the “Power” page.
- If the power supply is working properly, it should be displayed as “Active” in the web-based configuration utility.
- If the power supply is not working properly, check the connections and ensure that the power supply is properly installed. If the issue persists, contact Cisco technical support for assistance.
Input Voltage and Frequency Requirements
The input voltage and frequency requirements for the PIX-506-PWR-AC Cisco Redundant AC Power Supply for PIX-506 are as follows:
- Input voltage range: 100-240 VAC
- Input frequency: 50-60 Hz
This means that the power supply can accept a wide range of input voltages, from 100 to 240 VAC, and can operate with input frequencies of either 50 or 60 Hz. This makes it suitable for use in a variety of different locations and with different types of electrical systems. The power supply is designed as a redundant power supply, providing a secondary power source in case of a primary power failure, ensuring uninterrupted power supply to the PIX-506 firewall.
Key Information for this Cisco PIX-506-PWR-AC
- Manufacturer: Cisco
- Part Number or SKU # PIX-506-PWR-AC
- Product Name: Redundant AC Power Supply for PIX Firewalls
- Product Type: Redundant Power Supply
Voltage Details of AC Power Adapter
- Input Voltage: 110 V AC
- Input Voltage: 220 V AC
- Input Voltage Range: 110 V AC
- Input Voltage Range: 220 V AC
- Frequency: 50 Hz
- Frequency: 60 Hz
Miscellaneous
- Compatibility: PIX 506 Firewall, PIX 515 Firewall, PIX 525 Firewall, PIX 535 Firewall
