Description
Cable Length and Distance Support
The Cisco QSFP-H40G-CU0-5M= 0.5m 40GbE QSFP Twinaxial Passive Copper Cable is a high-speed copper cable designed for use in data centers and other high-performance computing environments. This cable has a length of 0.5 meters, which makes it ideal for short-range connections.
The QSFP-H40G-CU0-5M= supports data transfer rates of up to 40 Gigabits per second (Gbps) using four 10 Gbps channels. This cable is compatible with a wide range of networking equipment, including Cisco switches, routers, and servers.
One advantage of using the QSFP-H40G-CU0-5M= cable is that it is a cost-effective solution for short-range data transmission compared to optical cables. Copper cables are generally less expensive than optical cables and do not require special handling or installation considerations.
Regulatory and Compliance Information
The Cisco QSFP-H40G-CU0-5M= 0.5m 40GbE QSFP Twinaxial Passive Copper Cable complies with several regulatory and compliance standards, including:
- RoHS: The cable is compliant with the European Union’s Restriction of Hazardous Substances (RoHS) directive, which restricts the use of certain hazardous substances in electronic and electrical equipment.
- REACH: The cable is also compliant with the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) regulation, which aims to protect human health and the environment from the risks posed by chemicals.
- TAA: The cable complies with the Trade Agreements Act (TAA), which requires that products purchased by the U.S. government are made in the United States or in designated countries that have a free trade agreement with the United States.
- FCC: The cable complies with the regulations set forth by the Federal Communications Commission (FCC) in the United States.
- CE: The cable also complies with the CE Marking requirements, which indicate that the product meets certain safety, health, and environmental protection standards for products sold within the European Economic Area.
In addition to these standards, the Cisco QSFP-H40G-CU0-5M= cable may also comply with other industry-specific regulations or standards, depending on its intended use and application.
Data Transfer Rates
The Cisco QSFP-H40G-CU0-5M= 0.5m 40GbE QSFP Twinaxial Passive Copper Cable is a high-speed copper cable designed for use in data centers and other high-performance computing environments. This cable supports data transfer rates of up to 40 Gigabits per second (Gbps) using four 10 Gbps channels.
The QSFP-H40G-CU0-5M= cable is designed to provide reliable and high-speed connectivity between networking equipment, including switches, routers, and servers. This cable uses a twinaxial copper design, which provides high-speed data transfer with low latency.
Compared to optical cables, copper cables like the QSFP-H40G-CU0-5M= are generally less expensive and do not require special handling or installation considerations. However, copper cables have a shorter maximum transmission distance compared to optical cables, which may limit their use in larger data center environments.
General Information about this Cisco QSFP-H40G-CU0-5M=
- Manufacturer: Cisco
- Part Number or SKU# QSFP-H40G-CU0-5M=
- Product
Name: QSFP Network Cable - Product Type: Network Cable
Technical Information of Cisco Network Cable
- Cable Type: QSFP
- Cable Length: 1.64 feet
- Connector on First End: QSFP Network
- Features: Passive
- Device Supported: Network Device
- Device Supported: Transceiver
- Data Transfer Rate: 40 Gbit/s
