Description
Data Transfer Speed
The UCSC-C3X60-HD4TB Cisco hard drive has a data transfer speed of 6 Gbps. This means that it can transfer data at a rate of up to 6 gigabits per second (Gbps). This is a high data transfer speed that is designed to support the high-performance requirements of enterprise-level storage systems and servers.6 Gbps data transfer speed is faster than the previous generation of SAS interface that supports 3 Gbps, this allows for faster data transfer and better performance for applications that require fast data access. Additionally, SAS interface supports full-duplex data transfer, which means it can read and write data at the same time, improving performance and efficiency.
This high data transfer speed allows for faster access to stored data and can improve the performance of applications that require fast data access, such as video streaming, online gaming, and virtualization. Additionally, the high data transfer speed can also improve the performance of backup and archiving operations, allowing for faster data recovery in case of failure.
Performance and Reliability
The UCSC-C3X60-HD4TB Cisco hard drive is designed for use in near-line storage systems, and it is optimized for cost-effective, high-capacity storage. It has a rotational speed of 7.2K RPM, which is slower than performance hard drives but results in lower power consumption and cost.In terms of performance, this hard drive may have slower data access times compared to performance hard drives, but it is still faster than hard drives with lower rotational speeds. It also provides a large storage capacity of 4TB, which is suitable for high-capacity storage applications such as data archiving, backup, and video surveillance.
In terms of durability, the hard drive is designed to withstand the rigors of near-line storage systems. It has a high Mean Time Between Failures (MTBF) rating, which means it has been designed and tested to operate continuously for a long time without failure. Additionally, the hot-swap capability allows easy hard drive replacement and maintenance, reducing downtime and improving system availability.
Compatibility and Installation
The UCSC-C3X60-HD4TB Cisco hard drive is compatible with a wide range of enterprise-level storage systems and servers that support SAS (Serial Attached SCSI) interface and 6 Gbps data transfer speed. It is also compatible with SAS controllers and host bus adapters (HBAs) that support SAS 6 Gbps technology. This drive is specifically designed for use in Cisco storage systems, and it is fully compatible with these systems.It is important to note that compatibility can vary depending on the specific make and model of the system or controller, so it is recommended to check the technical specifications of the system or controller before purchasing this hard drive. Additionally, some systems may require a firmware update to support the 6 Gbps data transfer speed of this drive.
It’s also important to check the form factor of the drive bay in your system and compare it with the form factor of the drive itself, as this drive has a 3.5-inch form factor. If the drive bay is not the same form factor, it may not fit in the system. Additionally, some systems may require specific versions of firmware, software, or drivers to support the SAS interface, so it’s important to consult the system’s documentation and check for any compatibility issues.
General Information:
Manufacturer : Cisco
Manufacturer Part : UCSC-C3X60-HD4TB
Performance:
Product Type : Internal Hard Drive
Form Factor : 3.5-inch
Capacity : 4TB
Spindle Speed : 7.2K RPM
Drive Interface Type : SAS
