Description
Key Features and Benefits
The CP-7937-PWR-SPL= is a power splitter designed specifically for the Cisco 7937 Conference Phone. The key features and benefits of this device include:
- Power Splitting: The CP-7937-PWR-SPL= splits the power supply into two separate outputs, allowing the conference phone to be used in locations where only one power outlet is available.
- Compatibility: This power splitter is designed specifically for use with the Cisco 7937 Conference Phone, ensuring a perfect fit and compatibility.
- Easy Installation: The device is easy to install, with plug-and-play functionality that requires no special tools or technical knowledge.
- Reliable Power Supply: The CP-7937-PWR-SPL= provides a reliable power supply for the conference phone, ensuring that it operates at optimal performance levels.
- Improved Call Quality: With a reliable power supply, the conference phone’s audio quality is improved, leading to better call quality and clearer communications.
- Cost-effective Solution: The CP-7937-PWR-SPL= is a cost-effective solution for locations with limited power outlets, as it enables the use of the conference phone without the need for additional electrical installations.
- Compliance: This power splitter is compliant with industry standards and regulations, ensuring safety and reliability.
In conclusion, the CP-7937-PWR-SPL= offers a simple and effective solution for power supply requirements in locations with limited electrical outlets and is an essential accessory for users of the Cisco 7937 Conference Phone.
Power Supply Requirements
The CP-7937-PWR-SPL= Cisco Power Splitter for 7937 requires a power supply that can provide DC voltage in the range of 48 V to 55 V and has a minimum power capacity of 20 watts. It is important to use a power supply that meets these specifications to ensure proper operation of the power splitter and the connected Cisco 7937 conference phone. The power supply must also be equipped with a 2.5mm inner diameter and 5.5mm outer diameter DC plug that can connect to the power splitter’s input port.
Configuration and Management
The CP-7937-PWR-SPL= Cisco Power Splitter is a simple and straightforward device that does not require any configuration or management. It is designed to distribute power to multiple Cisco 7937 conference phones, allowing them to be powered from a single power source.
To use the CP-7937-PWR-SPL=, you simply need to connect the power supply to the splitter, and then connect each conference phone to the splitter using the included cables. The splitter will automatically distribute power to each device, without the need for any further setup or management.
It is important to note that the CP-7937-PWR-SPL= is not a switch or a router, and does not have any management interface or control functions. It is simply a passive power distribution device, designed to make it easier to power multiple conference phones in a single location.
If you encounter any issues with the CP-7937-PWR-SPL=, you should refer to the installation guide or contact Cisco technical support for assistance.
General Information about this Cisco CP-7937-PWR-SPL=
- Cisco CP-7937-PWR-SPL= Power Splitter For 7937
- Manufacturer : Cisco
- Model Number or SKU# CP-7937-PWR-SPL=
- Product Name Power over Ethernet Splitter
- Product Type PoE Splitter
Technical Information of Cisco Power over Ethernet Splitter
- Device Supported: Conference Platform
Miscellaneous
- Compatibility Cisco Unified IP Conference Station 7937G
