Description
Technical Specifications and features of Router PSU
The DCJ5952-01P is a 280 Watt DC power supply for the Cisco 7200 Series routers. It has the following technical specifications and features:
- Input voltage range: -40 to -72 VDC
- Input current: 4.5 A (at -48 VDC)
- Output voltage: -48 VDC
- Output power: 280 W
- Output current: 5.83 A (at -48 VDC)
- Hold-up time: 17 ms (minimum)
- Efficiency: 84% (typical)
- Operating temperature range: 0 to 50 degrees Celsius
Performance and Reliability of AC Power Supply
The DCJ5952-01P Cisco 7200 Series 280 Watt DC Power Supply is a high-performance and reliable power supply for the Cisco 7200 Series router. It provides a steady and consistent power supply to the router, ensuring that it can operate at optimal levels.
Performance-wise, the DCJ5952-01P has a power output of 280 watts and is designed to work with the Cisco 7200 Series router, providing power to all the necessary components. It also has a wide input voltage range, allowing it to operate in different power environments.
In terms of reliability, the DCJ5952-01P is built with quality components and is designed to meet industry standards for power supplies. It is also designed to be easy to install and maintain, reducing the potential for downtime. Additionally, it has a built-in diagnostic feature that allows for quick and easy troubleshooting in case of any issues.
Installation and Setup of Power Supply
The DCJ5952-01P Cisco 7200 Series 280 Watt DC Power Supply is a power supply unit that provides DC power to the Cisco 7200 Series routers. The installation and setup of this power supply involves the following steps:
- Unpack the power supply and ensure that all components are present and in good condition.
- Install the power supply in the Cisco 7200 Series router by sliding it into the designated slot on the router’s back panel.
- Connect the DC power cable to the power supply and plug the other end into a DC power source. The power supply should now be providing power to the router.
- Verify that the power supply is working properly by checking the status LEDs on the front panel of the router. The power supply LED should be lit green, indicating that the power supply is providing power to the router.
- Configure the power supply settings in the router’s software by accessing the command-line interface (CLI) and entering the appropriate commands. This may include setting the input voltage range, configuring the power redundancy, and monitoring the power supply status.
- Test the power supply by simulating a power failure and ensuring that the router switches to the redundant power supply or backup power source without interruption.
It is important to ensure that the power supply has been installed correctly and that the voltage and current requirements of the router are met. It is also important to verify that the power supply is working properly and that the router is configured to use the power supply correctly.
General Information
- Manufacturer Cisco Systems, Inc
- Manufacturer Part Number : DCJ5952-01P
- Brand Name: Cisco
- Type: Networking
- Sub-Type: Router Power Supply
- Compatibility: For 3925/3945 Router







