Description
Accelerate workload performance
The Dell 34DPK is a 7.68TB PCI-E NVMe TLC Flash Read Intensive SSD. It is designed for read-intensive workloads, such as data analytics, data warehousing, and video streaming. According to Dell, it can deliver up to 3.2 GB/s sequential read performance and up to 2.8 million IOPS random read performance. The SSD also features low latency, high endurance, and power-loss protection. It is compatible with Dell PowerEdge servers that have an NVMe-enabled storage bay.
High Compatibility
The Dell 34DPK 7.68TB PCI-E NVMe TLC SSD is designed to be compatible with Dell PowerEdge servers that have an NVMe-enabled storage bay. NVMe (Non-Volatile Memory express) is a host controller interface and storage protocol that is designed to take advantage of the high-speed performance of solid-state drives (SSDs) and NAND flash memory. It provides a more efficient way to access storage media connected to the PCI Express (PCIe) bus. The SSD is form factor of U.2 and requires a U.2 NVMe SSD Bay to be installed in. It is recommended to check with the Dell website or consult with a Dell representative to confirm compatibility with your specific server model.
Reliability
The Dell 34DPK 7.68TB PCI-E NVMe TLC SSD is designed to be a high-performance and reliable storage solution for read-intensive workloads. TLC (Triple-Level Cell) is a type of NAND flash memory that stores three bits of data per cell, which makes it more cost-effective than MLC (Multi-Level Cell) or SLC (Single-Level Cell) flash memory. However, TLC flash memory typically has lower write endurance and higher error rates than MLC or SLC flash memory.
Dell has implemented a number of features in the product of SSD to enhance its reliability. For example, it uses an advanced error correction code (ECC) algorithm to detect and correct errors, and also features power-loss protection to prevent data loss in the event of a power outage.
It also has a MTBF (mean time between failures) of 2 million hours and supports up to 4 DWPD (drive writes per day) for 5 years, which is decent.
It is always important to consider the specific requirements of your workloads and consult with Dell or experienced technician before making a decision on storage solutions.
General Information about this Dell 34DPK
- Manufacturer: Dell
- Part Number or SKU# 34DPK
- Product Type: Solid State Drive (SSD)
- Interface: PCI-E 4.0 X4
Technical Information for 7.68TB Solid State Drive
- Storage Capacity: 7.68TB
- Nand Flash Memory Type: Triple Level Cell (TLC)
- Form Factor: U.2 15mm 2.5inch
- Features: Read Intensive
- Lithography: 96-layer TLC 3d Nand
- Shock: 1000 G
- MTBF: 2000000 Hours
Performance of NVMe SSD
- Sequential Read: 7000 MBPS
- Sequential Write: 4300 MBPS
- Random Read (100% Span): 1000000 IOPS
- Random Write (100% Span): 130000 IOPS
Dimensions & Weight of PCI-E SSD
- Height: 0.63 Inch
- Width: 3.10 Inch
- Depth: 5.45 Inch
- Weight: 1.50 Lbs
Compatibility
- Poweredge T640
- Poweredge C6420
- Poweredge R440
- Poweredge R640
- Poweredge R650
- Poweredge R650xs
- Poweredge R6525
- Poweredge R740xd
- Poweredge R7425
- Poweredge R750
- Poweredge R750xa
- Poweredge R7525
- Poweredge R840
- Poweredge R940
- Poweredge R940xa
- Poweredge T550
Benefits of SSD over spin drives
- More Durable- Feature a non-mechanical design of NAND flash mounted on circuit boards, and are more shock resistant.
- Faster- Faster data access, boot ups, file transfers, and an overall quicker computing experience than hard drives.
- Quieter- Run at near silent operation unlike loud, whirring hard disc drives.
- Lighter- Flash-based SSDs weigh considerably less.
- Cooler- SSDs require little power to operate, resulting in less heat output by your system.
- More Efficient- Consume less power at peak load.
Contact us or ask for live chat/help if you have any questions about the compatibility of this item to ensure the model’s matching features with your current system.







