Description
Installation Instructions
- How to physically install the Dell 192GB PC4-23400 2933MHz DDR4 SDRAM into a computer
- Tools required for installation
- Step-by-step guide for installing the memory
- Safety precautions to take before installing the memory
- How to properly handle the memory module during installation
- How to properly seat the memory module into the memory slot
- How to properly secure the memory module into the memory slot
- How to properly configure the computer’s BIOS or UEFI settings after installation
- How to verify the memory has been installed correctly
- Troubleshooting steps for common installation issues
- How to remove the memory module if necessary
- Any additional software or drivers required for the memory to function properly
- How to update the computer’s firmware if necessary
- How to perform a memory test to ensure proper function
- How to properly dispose of the memory module if it needs to be replaced.
Memory Capacity and Speed
Memory capacity refers to the amount of data that can be stored on a memory module, such as the Dell 192GB PC4-23400 2933MHz DDR4 SDRAM. It is typically measured in gigabytes (GB) or terabytes (TB). The higher the capacity, the more data that can be stored and accessed quickly by the computer.
Memory speed, also known as clock speed, refers to the rate at which the memory can transfer data. It is measured in megahertz (MHz) or gigahertz (GHz). The faster the clock speed, the quicker the memory can access and transfer data to the computer’s processor. In the case of this Dell memory, it’s clock speed is 2933 MHz.
In general, having more memory capacity and faster memory speeds can improve the overall performance of a computer, as the computer can store and access more data quickly. However, the specific effects on performance will depend on the computer’s overall system configuration and the type of tasks being performed.
Power Consumption
Power consumption refers to the amount of electrical power that a device, such as the Dell 192GB PC4-23400 2933MHz DDR4 SDRAM, consumes while in operation. It is typically measured in watts (W). Memory modules like DDR4 SDRAM typically consume very low power, typically around 1.2V to 1.5V.
Power consumption can be an important factor to consider when building or upgrading a computer system, as it can affect the overall energy efficiency of the system and the cost of operating it over time. Lower power consumption can lead to reduced heat output and can help to prolong the life of the computer’s power supply.
In general, newer memory technologies like DDR4 SDRAM are designed to consume less power than older technologies like DDR3. So this specific memory module may consume lower power compared to DDR3 module with similar specifications.
It’s important to note that power consumption of a memory module may depend on the usage scenario and the system it is being used in. For example, if a system is heavily loaded with tasks and applications, the power consumption will be higher than when the system is idle.
General Information
- Brand Name: Dell
- MPN: 370-AESR
- Type: Memory (RAM)
- RAM -Type: Pc4-23400
- Product Name: 192GB DDR4 SDRAM Memory Module
- SKU: 370-AESR
Technical Information
- Storage Capacity: 192GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 6 X 32GB
- Bus Speed: 2933mhz DDR4-23400/PC4-2933V
- Data Integrity Check: Ecc
- Signal Processing: Registered
- Cas Latency Timings: Cl21
- Rank Features: 2rx4
- Form Factor: 288-Pin Rdimm
Physical Characteristics
- Dimensions (W X D X H) : 8.89 X 19.81 X 1.91 Cm (3.5 X 7.8 X 0.75 In)
- Weight: 0.45 Kg (1 Lb)
Compatibility
- Poweredge R640
- Poweredge R740
- Poweredge R940
- Poweredge R740xd
- Poweredge C6420
- Precision Workstation 7820 Tower
- Precision Workstation T7820xl Tower
- Poweredge T640
- Poweredge Fc640
- Poweredge M640
- Poweredge M640 Vrtx
- Precision Workstation R7920 Xl
- Precision Workstation R7920
- Precision Workstation T7920xl Tower
- Precision Workstation 7920 Tower
- Poweredge C4140
- Poweredge R840
- Poweredge Mx740c
- Poweredge Mx840c
