Description
Introduction to Solid State Drives
The 400-AMCV Dell 960GB MLC SAS 12GBPS 2.5-inch Hot Swap Solid State Drive is a high-performance storage solution designed for use in enterprise-level servers and storage systems. This drive utilizes Multi-Level Cell (MLC) NAND Flash technology, which provides a balance of performance and durability.
The SAS (Serial Attached SCSI) interface allows for fast data transfer rates of up to 12 Gbps, making it ideal for high-bandwidth applications such as video editing and data analysis. The 2.5-inch form factor and hot-swap capability allow for easy installation and maintenance in server environments.
With a large capacity of 960GB, this drive provides ample storage for large amounts of data, making it suitable for data centers and other high-demand environments. Additionally, the solid-state design ensures faster data access times and improved reliability compared to traditional hard drives.
Power Management of 960GB SSD
Power management in the Dell 960GB Mlc SAS 12GBPS 2.5inch Hot Swap Solid State Drive refers to the ways in which the drive is able to conserve power and reduce energy consumption. This can include features such as power-saving modes, automatic shut-off when not in use, and the ability to adjust power settings based on usage patterns. Additionally, the drive may have built-in sensors and monitoring tools that allow for real-time monitoring of power usage and identification of areas where energy efficiency can be improved. Overall, power management helps to ensure that the drive is using energy in an efficient and sustainable manner, which can help to reduce costs and prolong the lifespan of the device.
Installation and Setup
Power installation and setup for the Dell 960GB MLC SAS 12GBPS 2.5 inch Hot Swap Solid State Drive (400-AMCV) involves the following steps:
- Ensure that the server or system where the drive is to be installed is powered off and unplugged from the electrical outlet.
- Open the server or system’s drive bay and locate the drive tray or carrier.
- Carefully insert the drive into the tray or carrier, making sure that it is securely connected to the SAS or SATA interface.
- Close the drive bay and power on the server or system.
- Once the system has booted, enter the system’s BIOS or RAID controller software to configure the drive. This may include creating a RAID array, configuring the drive as a boot device, or formatting the drive.
- Once the drive has been configured, it should be ready for use.
It is important to note that the specific steps and procedures for power installation and setup may vary depending on the server or system in which the drive is being installed. It is recommended to refer to the system’s documentation or contact the manufacturer for specific instructions.
General Information
- Manufacturer : Dell
- Manufacturer Part Number : 7J7M0
- Dell Part Number : 400-AMCV
- Device Type : Solid State Drive (SSD)
- Sub-Type : SAS-12GBPS
Technical Information
- Type : Solid State Drive – Hot Swap
- Capacity : 960 GB
- Nand Flash Memory Type: Multi-Level Cell (MLC)
- Form Factor : 2.5
- Interface : SAS 12GB/S
- Data Transfer Rate: 1.2 GBPS
- Features : Read-Intensive Endurance
Performance
- Drive Transfer Rate : 1.2 GBPS (External)
Expansion & Connectivity
- Interfaces : 1 X SAS 12 GB/S
- Compatible Bays : 1 X 2.5 – Hot-Swap
Compatibility Information
- Poweredge FC630
- Poweredge FC640
- Poweredge FC830
- Poweredge M630
- Poweredge M640
- Poweredge M640 VRTX
- Poweredge M820
- Poweredge M830
- Poweredge R630
- Poweredge VRTX
