Description
Optimized for Mixed Use Applications
The 400-ANOG Dell 1.92TB Mixed Use MLC SAS 12GBPS Hot Plug Solid State Drive is a high-performance storage solution designed for use in a variety of applications. The drive is optimized for mixed use, meaning it can handle a combination of read and write operations, making it suitable for a wide range of workloads.
The drive has a large capacity of 1.92TB, providing ample storage space for large amounts of data. It is built with Multi-Level Cell (MLC) NAND flash technology, which allows for higher storage density and improved performance over traditional Single-Level Cell (SLC) drives.
The drive is also equipped with a SAS (Serial Attached SCSI) interface, which provides faster data transfer rates of up to 12GBps. This makes it ideal for use in high-performance environments, such as data centers and enterprise servers.
The drive is also hot-plug capable, meaning it can be easily installed and removed without shutting down the system. This feature makes it easy to upgrade or replace the drive without interrupting ongoing operations.
Benefits of Using a Hot Plug SSD
A Hot Plug is a feature that allows users to add or remove a device, such as a solid state drive, from a computer system without having to turn off the power or reboot the system. This feature provides several benefits, including:
- Increased uptime: With a Hot Plug, users can replace a failed drive or add additional storage capacity without interrupting the normal operation of the system. This reduces downtime and improves overall system availability.
- Easy maintenance: Hot Plug drives can be easily removed and replaced, which makes it easier to perform maintenance tasks such as firmware updates or data backups.
- Scalability: Hot Plug drives allow users to expand storage capacity as needed, without having to shut down the system. This makes it easier to scale storage capacity up or down as needed.
- Improved data protection: Hot Plug drives can be used in redundant arrays, such as RAID, which can provide improved data protection and fault tolerance.
- Cost-effective: Hot Plug drives are more cost-effective than traditional hard drives because they have a longer lifespan and are more energy-efficient.
Using a Hot Plug solid state drive provides many benefits including increased uptime, easy maintenance, scalability, improved data protection, and cost-effectiveness.
Power Management of 1.92TB SSD
The Dell 400-ANOG is a solid state drive (SSD) that has a storage capacity of 1.92 terabytes (TB) and is designed for mixed use, meaning it can be used for both read-intensive and write-intensive applications. The drive uses multi-level cell (MLC) technology, which allows for higher storage density and lower cost per gigabyte than single-level cell (SLC) technology.
The drive uses the SAS (Serial Attached SCSI) interface, which is a high-speed data transfer protocol that is commonly used in enterprise-level storage systems. The drive also supports a data transfer rate of 12 gigabytes per second (GBPS).
The drive is designed to be hot-plugged, meaning it can be inserted and removed from the system while it is running without disrupting the system’s operation. This feature makes it easy to add or replace the drive without having to shut down the system.
Power management is a key feature of the Dell 400-ANOG SSD. The drive uses low-power idle modes to conserve energy when it is not in use. It also supports the Advanced Power Management (APM) feature, which allows the drive to adjust its power consumption based on the workload. This helps to reduce power consumption and increase the overall energy efficiency of the system.
General Information
- Manufacturer : Dell
- Manufacturer Part Number : XF4X6
- Dell Part Number : 400-ANOG
- Type : Solid State Drive (SSD)
- Sub-Type : SAS-12GBPS
Technical Information
- Type : Solid State Drive – Hot-Swap
- Capacity : 1.92 TB
- Nand Flash Memory Type: Multi-Level Cell (MLC)
- Form Factor : 2.5INCH
- Interface Type: SAS 12GB/S
- Data Transfer Rate : 1.2GPBS
- Features : Mix Use
Performance
- Drive Transfer Rate : 1.2 GBPS (External)
Expansion & Connectivity
- Interfaces : 1 X SAS 12 GB/S
- Compatible Bays : 1 X Hot-Swap – 2.5
