Description
Operating Voltage
The operating voltage of the A9652457 Dell 8GB 2400mhz PC4-19200 Non ECC Single Rank DDR4 SDRAM 288-Pin RAM is 1.2 volts.
DDR4 RAM typically operates at a lower voltage than its predecessors (DDR3, DDR2, and DDR), which helps to reduce power consumption and improve energy efficiency. The 1.2 volts operating voltage of DDR4 RAM is significantly lower than the 1.5 volts operating voltage of DDR3 RAM, which was the most commonly used RAM in computers before DDR4 was introduced.
The lower voltage of DDR4 RAM also helps to reduce the amount of heat generated by the RAM modules, which can be beneficial for computer systems that generate a lot of heat or for systems with limited cooling capabilities.
It’s important to note that the operating voltage of RAM is not adjustable by the user and is determined by the RAM module itself. The motherboard and CPU must also support the operating voltage of the RAM in order for it to function properly.
Error Correction
Error correction is a process used in computer memory systems to detect and correct errors that may occur during data transmission and storage.
When data is stored in memory, it is typically stored in binary form as a series of 1’s and 0’s. However, due to various factors such as electrical interference or malfunctioning hardware, these values may become corrupted or altered, resulting in errors in the stored data.
Error correction mechanisms, such as ECC (Error-Correcting Code) and Non-ECC (Non-Error-Correcting Code) RAM, are designed to detect and correct these errors.
ECC RAM uses an extra memory chip to store parity data, which is used to detect errors in the stored data. If an error is detected, the system can use the parity data to correct the error before it causes any problems.
Non-ECC RAM, on the other hand, does not have this extra memory chip, and relies solely on the memory controller and software to detect and correct errors. This makes it less reliable than ECC RAM, but also less expensive.
Compatibility with Dell Systems
The A9652457 Dell 8GB 2400mhz Pc4-19200 Non Ecc Single Rank DDR4 SDRAM 288-Pin Ram is compatible with Dell systems that support DDR4 memory with the following specifications:
- Speed: 2400MHz (PC4-19200)
- Type: Non-ECC (Error Correcting Code)
- Rank: Single Rank
- Pin count: 288
Before purchasing this RAM, it is important to check the compatibility of your Dell system’s motherboard with these specifications. You can find this information in the system’s documentation or by contacting Dell’s technical support.
Additionally, it is important to note that the capacity of the RAM and the number of slots on the motherboard also play a role in compatibility. For example, if your Dell system has only two RAM slots and each slot can support a maximum of 8GB of RAM, then you cannot use two A9652457 modules together to get 16GB of RAM. Instead, you would need to use two 8GB modules that are compatible with your system.
General Information
- Manufacturer: Dell
- Manufacturer Part Number: A9652457
- Type: Memory (RAM)
- Sub-Type: PC4-19200
- Product Name: 8GB DDR4 SDRAM Memory Module
Technical Information
- Storage Capacity: 8GB
- Memory Technology: DDR4 SDRAM
- Number Of Modules: 1 X 8GB
- Memory Speed: 2400mhz DDR4-2400/PC4-19200
- Data Integrity Check: Non Ecc
- Features: Dual Rank, Unbuffered
- Cas Latency Timings: Cl17
